About the Position: Serves as a Subject Matter Expert Civil Engineer and as a Team Leader performing hydrologic and hydraulics (H&H) engineering studies of surface water, ground water, sediment and debris production, water quality, meteorology, water surface profiles, sedimentation engineering, river morphology, and stream bank protection. Note: Recruitment incentives, including student loan repayment, may be offered to highly qualified candidates.

Duties

Performs hydrologic and hydraulics engineering studies in support of water resources planning; design and construction; reservoir regulation; and flood plain management. Manages all aspects of hydrologic and hydraulics studies and designs of difficult and complex problems. Executes detailed hydrologic studies that may include rainfall-runoff relationships, regional/discharge-frequency/precipitation-frequency analysis, reservoir system simulation, debris and sediment estimates, and reservoir yields. Performs hydraulic and sedimentation studies that may include analysis of complex flood hydraulic problems using advanced computer programs, and design of critical flood control channels, levees, debris basins, dams and/or other hydraulic structures. Analyses river sediment transport characteristics with advanced 1- or 2-dimensional sediment transport models and evaluates potential post-fire debris flow. Prepares, administers scope of work and cost estimates for hydrologic and hydraulics studies awarded to private architect/engineer firms and performs technical review of study and results. Applies advanced techniques to extend hydrologic data base when long-term stream flow and precipitation records are not available. Ensures that the organization's strategic plan, mission, vision, and values are communicated to the team and integrated into the team’s strategies, goals, and objectives. Presents hydrologic and hydraulics study results and its use in design studies.

Requirements

• Appointment may be subject to a suitability or fitness determination, as determined by a completed background investigation.
• The incumbent must earn their Contracting Officer Representative (COR) certification within two years of appointment.
• Must be able to obtain and maintain a valid state driver's license.
• Temporary duty travel (TDY) required up to 10% of the time.

Qualifications

Who May Apply: Only applicants who meet one of the employment authority categories below are eligible to apply for this job. You will be asked to identify which category or categories you meet, and to provide documents which prove you meet the category or categories you selected. See Proof of Eligibility for an extensive list of document requirements for all employment authorities. Current Department of Army Civilian EmployeesDomestic Defense Industrial Base/Major Range and Test Facilities Base Civilian Personnel WorkforceInteragency Career Transition Assistance PlanLand Management Workforce Flexibility ActMilitary Spouses, under Executive Order (E.O.) 13473Priority Placement Program, DoD Military Reserve (MR) and National Guard (NG) Technician EligiblePriority Placement Program, DoD Military Spouse Preference (MSP) EligiblePriority Placement Program, DoD MR and NG Preference Eligible Tech Receiving Disability RetirementPriority Placement Program, DoD Retained Grade Preference EligibleVeterans Employment Opportunity Act (VEOA) of 1998 In order to qualify, you must meet the education and experience requirements described below. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social). You will receive credit for all qualifying experience, including volunteer experience. Your resume must clearly describe your relevant experience; if qualifying based on education, your transcripts will be required as part of your application. Additional information about transcripts is in this document. Basic Requirement for Civil Engineer: A. Degree: Bachelor's degree (or higher degree) in engineering. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher degree) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); OR (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. OR B. Combination of Education and Experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following: 1. Professional registration or licensure - Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions. 2. Written Test - Evidence of having successfully passed the Fundamentals of Engineering (FE) examination, or any other written test required for professional registration, by an engineering licensure board in the various States, the District of Columbia, Guam, or Puerto Rico. 3. Specified academic courses - Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in A above. The courses must be fully acceptable toward meeting the requirements of an engineering program. 4. Related curriculum - Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. In addition to meeting the basic requirement above, to qualify for this position you must also meet the qualification requirements listed below: Specialized Experience: One year of specialized experience equivalent to at least the GS-12 grade level in the Federal service which includes hydraulic/hydrologic analysis, contract management, and hydraulic modeling systems. Selective Placement Factor: This position requires either a Professional Engineer (PE) or Professional Hydrologist (PH) license. You MUST submit a copy of your current and valid PE/PH license with your application.The expiration date on your license must be after the date you submit this application. Failure to meet this requirement will result in your application not receiving consideration for this position. Some federal jobs allow you to substitute your education for the required experience in order to qualify. For this job, you must meet the qualification requirement using experience alone--no substitution of education for experience is permitted. You will be evaluated on the basis of your level of competency in the following areas: Cost Estimation and AnalysisHydraulic EngineeringHydrologyLeadershipManages and Organizes Information Time in Grade Requirement: Applicants who have held a General Schedule (GS) position within the last 52 weeks must have 52 weeks of Federal service at the next lower grade or equivalent (GS-12).

Education

FOREIGN EDUCATION: If you are using education completed in foreign colleges or universities to meet the qualification requirements, you must show the education credentials have been evaluated by a private organization that specializes in interpretation of foreign education programs and such education has been deemed equivalent to that gained in an accredited U.S. education program; or full credit has been given for the courses at a U.S. accredited college or university. For further information, visit: https://sites.ed.gov/international/recognition-of-foreign-qualifications/.

Contacts

• Address RI-W2ST01 US ARMY ENGINEER DISTRICT-LOS ANGELES DO NOT MAIL Los Angeles, CA 90017 US
• Name: Army Applicant Help Desk