This is an Air Reserve Technician (ART) position. ARTs are part of the regular career civil service and enjoy all the benefits granted to Federal employees in the competitive civil service. In addition, ARTs are required to maintain their active membership in the AF Reserve unit where assigned. ARTs receive on average one weekend of military training per month. Click on "Learn more about this agency" button below to view Eligibilities being considered and other IMPORTANT information.

Duties

The primary purpose of this position is to serve as an Air Reserve Technician (ART) weapons section small shop chief no more than 25% of the time over journey level mechanics who verify and analyze malfunctions, troubleshoot, calibrate modify, test, align, inspect, repair, configure, deconfigure, and load assigned integrated weapons delivery systems; and to provide training to reservists in the accomplishments of tasks set forth herein, Performs small shop chief duties over the journey level mechanics in the section no more than 25% of the time. Performs pretest, operational, functional, and final testing of integrated weapons systems electronic components, and AME. Troubleshoots integrated weapons systems, electronic and electromechanical components, subassemblies, and test equipment to determine nature of malfunctions and corrective actions required. Plans and conducts training. Performs maintenance, repair, inspection, fabrication and modification of integrated weapons systems electronic and electro-mechanical components and their subassemblies. Complies with safety and security requirements. Controls tools. Accomplishes configuration changes of integrated weapons control, launch, release, and suspension assemblies to accommodate assigned aircraft mission. Performs alignment and calibration of integrated weapons systems components. Removes/installs integrated weapons systems electronic components into aircraft, alternate mission equipment, and associated test equipment. Loads and unloads, positions, arms, and safes all assigned air munitions on aircraft.

Requirements

• U.S. Citizenship Required
• Males must be registered for Selective Service, see www.sss.gov
• Must obtain and maintain a secret clearance
• If authorized, PCS will be paid IAW JTR and AF Regulations. If receiving an authorized PCS, you may be subject to completing/signing a CONUS agreement. More information on PCS requirements, may be found at: https://afciviliancareers.com/regulatory/
• This posn is subject to provisions of the DoD Priority Placement Program
• This is a testing designated position (TDP). The employee is subject to random drug testing.
• Employee may be required to work other than normal duty hours, to include evenings, weekends and/or holidays
• Shift work and emergency overtime may be required
• Employee must maintain current certifications
• Disclosure of Political Appointments
• Must be a current member of the AF Reserve or willing/qualified to join
• Advance in hire may be authorized if there is demonstrable proof provided on your resume
• Detail NTE 30 SEP 2024
• AFSC: 2W171

Qualifications

This position is obligated to the former incumbent and has return rights to this position under 10 U.S.C. 1586. Upon the employee's return you are subject to being displaced from this obligated position. Every effort will be made to find an equivalent position for you at the same grade for which you qualify within the commuting area without loss of seniority, status, or tenure. QUALIFICATIONS: Applicants will be rated in accordance with the OPM Qualification Standard Handbook X-118C for the WG-6600 ORDNANCE EQUIPMENT MECHANIC; ARMAMENT WORK FAMILY. Although a specific length of time and experience is not required for most blue-collar positions, you must meet any screen-out element listed, and show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on the quality of experience, not necessarily the length of time. The screen out element for this position is Ability To Do the Work of AN AIRCRAFT ORDNANCE SYSTEMS MECHANIC without More Than Normal Supervision. JOB ELEMENTS: Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the following areas: 1. Ability to follow oral and written instructions. Skill in the selection and use of electronic and electro-mechanical testing equipment. Ability to calibrate complete electronic and electro-mechanical systems. Ability to troubleshoot complete electronic and electro-mechanical systems. 2. Skill in the use of standard hand and power tools of the electronics and electro-mechanical trades. Ability to test complete electronic and electro-mechanical systems. Ability to maintain, repair, and modify complete electronic and electro-mechanical systems. 3. Ability to read and interpret a variety of technical data such as schematic diagrams, blueprints, and technical orders relating to the electronics and electro-mechanical trades. Knowledge of applicable personnel, manpower, time and attendance, and budgeting instructions, guidelines, and requirements. Ability to clean work area and/or job site upon completion of work. 4. Comprehensive knowledge of operation, capabilities, and limitations of complex electronic systems complicated by a variety of multi-component assemblies and devices. Knowledge of safety requirements as outlined in applicable standards, regulations, and technical orders. Knowledge of security requirements as outlined in applicable standards, regulations, and policy statements. 5. Knowledge of related electronic, electrical, mechanical, optical, pneumatic, and hydraulic systems. 6. Ability to remove/install complete electronic or electro-mechanical systems. Ability to operate a computer. Knowledge of tool, equipment, and materials accountability and security. Ability to clean work area and job site upon completion of work. Knowledge of USAF Technical Order Program and its certification and documentation procedures. Other Conditions of Employment Cont'd: 1. May be subject to shift work and uncommon tours of duty. May be required to fly in military or commercial aircraft for TDY purposes. Incumbent may be required to perform expediter/dispatcher duties. Performs other related duties as assigned. May be required to fly in commercial and military aircraft to perform temporary/permanent duty assignments. 2. This is an Air Reserve Technician position. The incumbent is required to meet and maintain Air Force Reserve requirements. Work schedule will be aligned to allow incumbent to fully participate in unit training assemblies (UTA). The incumbent's regular assignments are ART duties; however, the incumbent may be assigned some non­ ART duties, generally not to exceed 30 percent of total responsibilities. 3. This position is covered by the Domestic Violence Misdemeanor Amendment (30 Sep 96) of the Gun Control Act (Lautenberg Amendment) of 1968. An individual convicted of a qualifying crime of domestic violence may not perform the duties of this position. PHYSICAL EFFORT: Heavy lifting (80 lb. and over). Hours of straight pulling are 2 hours/week. Hours of pulling hand over hand are 1 hour/week. Hours of pushing are 2 hours/week. Reaching above shoulder. Use of fingers. Both hands required. Hours of walking are 2 hours/day. Hours of standing are 4 hours/day. Hours of kneeling are 4 hours/week. Hours of repeated bending are 4 hours/week. Hours of climbing, legs only are 3 hours/week. Climbing, use of legs and arms. Both legs required. Operation of crane, truck, tractor, or motor vehicle. Ability for rapid mental and muscular coordination simultaneously. Near vision correctable at 13 inches to 16 inches to Jaeger 1 to 4. Far vision correctable in one eye to 20/20 and 20/40 in the other. Both eyes required. Depth perception. Ability to distinguish basic colors. Ability to distinguish shades of color. Hearing (aid permitted).If it can be otherwise accommodated, a specific physical condition or impairment will not automatically disqualify a candidate. WORKING CONDITIONS: Works inside and out, in inclement weather, on wet slippery, hot/cold ramps, aircraft surfaces and work stands. Subject to the dangers from exposure to toxic fumes, fuel, high pressure air and fluids, electrical shock or bums caused by electrical or RF energy. Dangers also include engine noise, blast, ingestion, fast actuating metal surfaces such as landing gears, speed brakes, and flaps. Will be required to transport, assemble, load, arm, or safe any assigned munitions, explosive device, or assembly up to and including class 1 explosives. May be subject to the hazards related to the removal or disassembly of explosive devices or subassemblies from explosive laden aircraft. PART-TIME OR UNPAID EXPERIENCE: Credit will be given for appropriate unpaid and or part-time work. You must clearly identify the duties and responsibilities in each position held and the total number of hours per week. VOLUNTEER WORK EXPERIENCE: Refers to paid and unpaid experience, including volunteer work done through National Service Programs (i.e., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student and social). Volunteer work helps build critical competencies, knowledge and skills that can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience.

Contacts

• Address AFRC Non-ART Locations 550 C Street W JBSA Randolph AFB, TX 78150 US
• Name: Total Force Service Center
• Phone: 1-800-525-0102
• Email: [email protected]