This is a Direct Hire Authority (DHA) solicitation utilizing the DHA for Certain Personnel of the DoD Workforce to recruit and appoint qualified candidates to positions in the competitive service. About the Position: This position is located within the Engineering Section of the Geotechnical & Water Resources Branch of the U.S. Army Corps of Engineers, New England District in Concord, MA. The incumbent will serve as a supervisor in the Geotechnical Engineering Section.

Duties

Communicate Geotechnical Engineering Section mission, plans and objectives to the section members. Establish priorities on incoming work and assigns to subordinates according to workload and capabilities. Prepare design documents for flood control structures. Plan subsurface explorations, sampling testing, and evaluation for site characterizations of (Hazardous, Toxic and Radioactive Waste) HTRW project sites, development and evaluation of solutions for ground water remediation. Develop designs and specifications for instrumentation for monitoring safety of dams and related structures and evaluating performance data collected. Perform inspections and coordinate with sponsors in support of Inspection of Completed Works program to ensure sponsors operate and maintain Federally constructed flood risk reduction systems throughout New England.

Requirements

• Appointment may be subject to a suitability or fitness determination, as determined by a completed background investigation.
• PCS /Moving Expenses MAY BE authorized.
• Recruitment/Relocation/Retention Incentive MAY BE authorized.

Qualifications

Who May Apply: US Citizens In order to qualify, you must meet the education and experience requirements described below. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social). You will receive credit for all qualifying experience, including volunteer experience. Your resume must clearly describe your relevant experience; if qualifying based on education, your transcripts will be required as part of your application. Additional information about transcripts is in this document. Basic Requirement for the Civil Engineering, 0810 Series: A. Degree: Bachelor's degree (or higher degree) in engineering. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher degree) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); OR (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. OR B. Combination of Education and Experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following: 1. Professional registration or licensure - Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions. 2. Written Test - Evidence of having successfully passed the Fundamentals of Engineering (FE) examination, or any other written test required for professional registration, by an engineering licensure board in the various States, the District of Columbia, Guam, or Puerto Rico. 3. Specified academic courses - Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in A above. The courses must be fully acceptable toward meeting the requirements of an engineering program. 4. Related curriculum - Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. In addition to meeting the basic requirement above , to qualify for this position you must also meet the qualification requirements listed below: GS-13 : One year of specialized experience which includes meeting FOUR of the following: 1) Prioritize, assign and/or monitor incoming work; 2) Review technical documents for compliance; 3) Create geotechnical design documents; 4) Evaluate data in relation to dam safety and other flood risk management related structures; 5) Assess flood risk reduction measures; and/or 6) Mentor staff. This definition of specialized experience is typical of work performed at the next lower grade/level position in the federal service (GS-12) or equivalent grade level. Some federal jobs allow you to substitute your education for the required experience in order to qualify. For this job, you must meet the qualification requirement using experience alone--no substitution of education for experience is permitted. Selective Placement Factor: This position requires the following: (a) current state issued Professional Engineering Registration (P.E.). You must include a copy of your current (not just the initial Registration) Engineering with your application package. If you fail to provide a copy of your current state issued Engineering registration, your application packet will be found incomplete.

Education

FOREIGN EDUCATION: If you are using education completed in foreign colleges or universities to meet the qualification requirements, you must show the education credentials have been evaluated by a private organization that specializes in interpretation of foreign education programs and such education has been deemed equivalent to that gained in an accredited U.S. education program; or full credit has been given for the courses at a U.S. accredited college or university. For further information, visit: https://sites.ed.gov/international/recognition-of-foreign-qualifications/

Contacts

• Address RD-W2SF05 US ARMY ENGINEER DISTRICT-NEW ENGLAND DO NOT MAIL Concord, MA 01742 US
• Name: Army Applicant Help Desk