About the Position: The incumbent will serve as a Program Manager for U.S. Army Corps of Engineers (USACE), New England District with oversight of the Risk Informed Design Program. This position is located at the New England District Headquarters in Concord, MA.

Duties

Serves as a principal advisor on technical issues, with respect engineering risk, risk informed design, and associated flood risk management (FRM) civil works issues for the District, Division and nationally. Directs and incorporates complex risk assessments and works closely with the Risk Management Center and Levee Safety Center in leading diverse multi-disciplinary teams evaluating the performance of USACE levees and dams. Serves as a technical expert in developing engineering design for state-of-the-art engineering application and construction techniques, which are often highly specialized and unique to the FRM civil works mission. Interprets and disseminates policies, regulations, and standards to team members.

Requirements

• Appointment may be subject to a suitability or fitness determination, as determined by a completed background investigation.
• A valid state driver's license is required within 30 days of entering position.
• Position occasionally requires the use of hard hats, steel-toed boots, hearing protection, eye protection.
• Recruitment/Retention/Relocation Incentives MAY BE authorized.
• PCS/Moving Expenses are NOT authorized.

Qualifications

Who May Apply: Only applicants who meet one of the employment authority categories below are eligible to apply for this job. You will be asked to identify which category or categories you meet, and to provide documents which prove you meet the category or categories you selected. See Proof of Eligibility for an extensive list of document requirements for all employment authorities. Current Department of Army Civilian EmployeesCurrent Department of Defense (DOD) Civilian Employee (non-Army)Domestic Defense Industrial Base/Major Range and Test Facilities Base Civilian Personnel WorkforceInteragency Career Transition Assistance PlanLand Management Workforce Flexibility ActMilitary Spouses, under Executive Order (E.O.) 13473Non-Department of Defense (DoD) TransferPriority Placement Program, DoD Military Reserve (MR) and National Guard (NG) Technician EligiblePriority Placement Program, DoD Military Spouse Preference (MSP) EligiblePriority Placement Program, DoD MR and NG Preference Eligible Tech Receiving Disability RetirementPriority Placement Program, DoD Retained Grade Preference EligibleReinstatementVeterans Employment Opportunity Act (VEOA) of 1998 In order to qualify, you must meet the education and experience requirements described below. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social). You will receive credit for all qualifying experience, including volunteer experience. Your resume must clearly describe your relevant experience; if qualifying based on education, your transcripts will be required as part of your application. Additional information about transcripts is in this document. Basic Requirement for the General Engineering 0801 Series and Environmental Engineering 0819 Series: See education section below. Basic Requirement for the Geologist 1350 Series: A. Degree: Bachelor's degree (or higher degree) in geology, plus 20 additional semester hours in any combination of mathematics, physics, chemistry, biological science, structural, chemical, civil, mining or petroleum engineering, computer science, planetary geology, comparative planetology, geophysics, meteorology, hydrology, oceanography, physical geography, marine geology, and cartography. OR B. Combination of Education and Experience: Course work as shown in A above, plus appropriate experience or additional education. (Note: Acceptable experience may have been gained through geological field or laboratory work that provided a means of obtaining professional knowledge of the theory and application of the principles of geology and closely related sciences, e.g., geophysics, geochemistry, or hydrology. Such work generally must have involved making close observations, taking samples, handling various types of instruments and equipment, assembling geologic data from source materials, and analyzing and reporting findings orally and in writing. In some situations, professional scientific experience in other fields may be accepted in part as professional geological experience. Such experience must have been preceded by appropriate education in geology or by professional geological experience, and must have contributed directly and significantly to the applicant's professional geological competence. To receive credit for geological experience obtained in positions that are not full-time professional geological positions, the applicant is responsible for indicating clearly the actual time or percentage of time devoted to geologic duties within such positions, and for giving adequate descriptions of the geologic functions.) GS-13 Specialized Experience: One year of specialized experience which includes meeting all of the following; 1) Advise personnel on organizational policy; 2) Analyze projects for risk and reliability related issues; 3) Provide consultation services on levee and dam safety modifications ; 4) Assist in developing alternate solutions to resolve risk-informed engineering issues. This definition of specialized experience is typical of work performed at the next lower grade/level position in the federal service (GS-12). GS-14 Specialized Experience: One year of specialized experience which includes meeting all of the following; 1) Serve as an advisor on flood risk management civil works issues; 2) Perform quality control on work of multi-disciplinary personnel; 3) Facilitate complex risk assessments of levees and dams; 4) Develop alternate solutions to resolve risk-informed engineering issues. This definition of specialized experience is typical of work performed at the next lower grade/level position in the federal service (GS-13). Some federal jobs allow you to substitute your education for the required experience in order to qualify. For this job, you must meet the qualification requirement using experience alone--no substitution of education for experience is permitted. You will be evaluated on the basis of your level of competency in the following areas: Decision MakingProject ManagementTechnical CompetenceWritten Communication Time in Grade Requirement for GS-13: Applicants who have held a General Schedule (GS) position within the last 52 weeks must have 52 weeks of Federal service at the next lower grade or equivalent (GS-12). Time in Grade Requirement for GS-14: Applicants who have held a General Schedule (GS) position within the last 52 weeks must have 52 weeks of Federal service at the next lower grade or equivalent (GS-13).

Education

FOREIGN EDUCATION: If you are using education completed in foreign colleges or universities to meet the qualification requirements, you must show the education credentials have been evaluated by a private organization that specializes in interpretation of foreign education programs and such education has been deemed equivalent to that gained in an accredited U.S. education program; or full credit has been given for the courses at a U.S. accredited college or university. For further information, visit: https://sites.ed.gov/international/recognition-of-foreign-qualifications/.

Basic Requirement for the General Engineering 0801 Series and Environmental Engineering 0819 Series:
A. Degree: Bachelor's degree (or higher degree) in engineering. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher degree) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); OR (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.
OR
B. Combination of Education and Experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:
1. Professional registration or licensure - Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.
2. Written Test - Evidence of having successfully passed the Fundamentals of Engineering (FE) examination, or any other written test required for professional registration, by an engineering licensure board in the various States, the District of Columbia, Guam, or Puerto Rico.
3. Specified academic courses - Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in A above. The courses must be fully acceptable toward meeting the requirements of an engineering program.
4. Related curriculum - Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions.

Contacts

• Address RD-W2SF05 US ARMY ENGINEER DISTRICT-NEW ENGLAND DO NOT MAIL Concord, MA 01742 US
• Name: Army Applicant Help Desk