This is an interdisciplinary position. The titles, and series identified are appropriate depending on the qualifications of the incumbent. The incumbent assists the area/zone or similar engineer and is responsible for providing basic technical guidance and in-the overall planning, design, installation and maintenance of the engineering phases of soil and water conservation practices.

Duties

Coordinates and supervises the planning, design and construction of engineering projects such as water management, erosion control, flood control, wetland creation or restoration, and other conservation practices. Makes periodic on-site inspections of engineering work for technical adequacy and adherence to standards and policy and to identify major problems not covered by precedents or established policies. Directs the type, scope and intensity of field investigations and surveys needed for practice implementation as well as the collection and processing of field data to ensure adequacy of the collected data. Directs and prepares designs, preliminary and final drawings and specifications on complex engineering practices such as engineering design analysis for hydrological, hydraulic, structural and geotechnical projects. Directs and performs site investigations and feasibility studies as well as field checks and field construction checks for conservation practice installations. Recommends changes in designs, specifications and schedules to accommodate conditions at construction site, availability of materials or to expedite construction. Assists Leadership in determining training needs of field personnel, making recommendations on training needed to assist the organization of the statewide engineering training program. Provides intensive engineering on-­the-job training to field office staff as indicated by needs. Assists Leadership in evaluating the effectiveness of engineering practices, technical documents, procedures and in the development of new technical documents /revisions to existing Technical Guide Standards, specifications and "How To" materials.

Requirements

• You must be a US Citizen or US National.
• Males born after 12/31/1959 must be Selective Service registered or exempt.
• Subject to satisfactory adjudication of background investigation and/or fingerprint check. If selected you will be sent instructions on obtaining fingerprints. Please note we are not able to reimburse any fees incurred for fingerprints.
• Successful completion of one-year probationary period, unless previously served.
• Direct Deposit Per Public Law 104-134 all Federal employees are required to have federal payments made by direct deposit to their financial institution.
• Successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit E-Verify at https://www.e-verify.gov/.
• Must possess and maintain a valid state motor vehicle operator's license for the type of vehicle(s) operated to perform the duties of this position; requires operating a motor vehicle on public/private roads during the day and sometimes after dark.

Qualifications

Applicants must meet all qualifications and eligibility requirements by the closing date of the announcement including specialized experience and/or education, as defined below. Basic Education Requirement:Degree: Engineering. To be acceptable, the program must: (1) lead to a bachelor's degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.; OR Combination of Education and Experience: college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following: Professional registration or licensure -- Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions. Written Test -- Evidence of having successfully passed the Fundamentals of Engineering (FE) examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico. Specified academic courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A. Related curriculum -- Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience. In addition to meeting one of the Basic Requirements listed above, applicants must meet the following Minimum Qualifications Requirement in order to be considered: Specialized Experience: To qualify for the GS-11 level, you must possess at least one year of specialized experience equivalent to the GS-09 level or higher in Federal service, or comparable experience not gained through Federal service. For this position, examples of specialized experience include: making modifications to established guides, policies, precedents and procedures by utilizing engineering principles, practices and techniques; providing engineering assistance to customers on various conservation practices and land treatment needs to groups and local governments; providing interpretation to local government employees and other personnel regarding engineering policies, standards, and procedures; OR Substitution of education in lieu of specialized experience for the GS-11 level: 3 year(s) of progressively higher-level graduate education leading to a PH. D or equivalent doctoral degree in engineering or related field of study; OR Combination of Education and Experience: A combination of graduate-level education and experience, as described above, may be used to qualify for this position. This combination must have equipped you with the necessary knowledge and/or experience to successfully perform the duties of this position. Combinations of experience and education must total at least 100% as outlined in OPM Qualifications policy. Specialized Experience: To qualify for the GS-12 level, you must possess at least one year of specialized experience equivalent to the GS-11 level or higher in Federal service, or comparable experience not gained through Federal service. For this position, examples of specialized experience include: formulation of engineering planning, design and construction of conservation practices that address natural resource protection; analyzing and managing engineering workload; identifying training needs of personnel and delivering training on both individual and group levels; recommending technical policies and procedures that strengthen the agency's ability to deliver quality resource conservation. Note: There is no education substitution for the GS-12 level. For more information on the qualifications for this position, click here: https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/#url=0800-ndx Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community, student, social). Volunteer work helps build critical competencies and can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience.

Education

If you are relying on your education to meet qualification requirements:
You must submit a copy of your transcripts to include course number, title, completion and grade. Education must be accredited by an accrediting institution recognized by the U.S. Department of Education in order for it to be credited towards qualifications. Therefore, provide only the attendance and/or degrees from schools accredited by accrediting institutions recognized by the U.S. Department of Education. If a relevant course is not clearly qualifying (e.g. special topic, seminar, research, thesis, obscure or misleading course title, etc.), please submit an official course syllabi and/or detailed course description from the university/college for that particular course to ensure you are properly evaluated. Please note that qualifications determinations are based solely on the information submitted for each particular vacancy announcement.

Important: If you are using foreign education to meet qualification requirements, you must send a Certificate of Foreign Equivalency with your transcript in order to receive credit for that education. Click on this link for more information.

Failure to provide all of the required documents/information as stated in this vacancy announcement may result in an ineligible rating or may affect the overall rating.

Contacts

• Address Natural Resources Conservation Service 1400 Independence Ave SW Washington, DC 20250 US
• Name: Jason Bell
• Email: [email protected]