The Facilities Management Service is currently hiring for one Supervisory Biomedical Equipment Support Specialist at the Cheyenne VA Health Care system located in Cheyenne, WY.

Duties

List of major duties and responsibilities of this position: Functions: Lifecycle management of any and all medical systems such as imaging, life support, dialysis, and monitoring to include physical and network support. Completes both routine and complex assignments involved in the installation, maintenance, modification, troubleshooting, repair and calibration of these complex therapeutic, diagnostic and life support medical devices and systems. Coordinates and works effectively with other facility support departments including but not limited to Facilities Management Service (FMS), Office of Information Technology (OIT), Sterile Processing Service (SPS), and Environmental Management Service (EMS). Specific tasks include but are not limited to incoming inspections, regular and unscheduled maintenance, and planning for end of life replacement in conjunction with clinical services. Utilizes common test equipment including, but not limited to, electrical safety analyzers, oscilloscopes, patient simulators, pulse generators, network analyzers, and multimeters. Performs advanced testing and troubleshooting of medical devices and systems involving their interfaces and connections to information systems either directly or through the facility's hardwired and wireless networks. Adheres to Medical Device Isolation Architecture (MDIA) Guidelines in both pre-procurement and during system implementation. Loads operating system (OS) and clinical application software as needed. Executes VA guidelines when responding to network incident response (due to infection, loss of services or regional and local policy changes). Develops policy for the Biomedical Engineering department and local facility as needed. Translates management goals and objectives into well-coordinated and controlled biomedical work operations. Maintains functional knowledge of relevant safety codes and standards of regulatory bodies including but not limited to The Joint Commission (TJC), National Fire Protection Association (NFPA), Food and Drug Administration (FDA), Nuclear Regulatory Commission (NRC), Association for the Advancement of Medical Instrumentation (AAMI). Documents all work performed in the computerized maintenance management system (CMMS). This documentation is completed in accordance with regulatory body requirements, Healthcare Technology Management (HTM) Documentation of Services guidelines and other organizational requirements. Implements the Biomedical Section training program, inhouse cross training, and vendor training, to ensure that technicians are kept abreast of the changing technology as effectively as possible within the available resources. As assigned, functions as a Contracting Officer Representative (COR) and keeps appropriate certification levels. Uses knowledge of government contract procedures and documentation requirements to develop statements of work, sole source justifications, other applicable documentation (6550, Independent Government Cost Estimate (IGCE), etc.) and to oversee vendor work. Collaborates with Logistics and Contracting to procure parts and services; functions as a purchase card holder, as required. Investigates, remediates and documents recalls and safety alerts within established timeframes. Participates in local safety improvement processes such as Root Cause Analysis (RCA), safety work groups, and Environment of Care Rounds. Identifies hazards during routine job performance and takes action to ensure they are addressed and corrected. Maintains knowledge of the state of the art in medical technology, including scientific advances, network protocols, and vendor changes. Focuses on professional development in all areas of medical technology lifecycle management including technical skills. Knowledge and training is obtained from formal (conference, classes) or informal (magazines, articles, peer training) means. Provides training and education as appropriate to medical technology end users and clinical staff. Provides mentoring and technical training to peers and development graded BESS. May be tasked with leading and managing installation or upgrade projects for medical devices and systems. This includes but is not limited to pre-implementation planning and coordination with end users, vendors, and other onsite support staff (OIT, Informatics, SPS, etc.) Additional duties are performed as assigned by supervisor related to maintenance, remediation, and tracking of medical systems (action items, special projects, etc.) to meet mission critical requirements. May be asked to assist in other administrative duties as well, including participating in hiring panels. Represents Biomedical/Clinical Engineering department on committees and in meetings as delegated by supervisor. Work Schedule: 7:00 AM - 3:30 PM Monday-Friday Telework: Available Virtual: This is not a virtual position. Functional Statement #: 57978-O Financial Disclosure Report: Not required

Requirements

Qualifications

Basic Requirements: United States Citizenship Citizen of the United States. English Language Proficiency Candidates will not be appointed under authority of 38 U.S.C. chapters 73 or 74, to serve in a direct patient-care capacity in VHA who is not proficient in written and spoken English. Experience and Education Associates degree in Biomedical Electronics Technology, Biomedical Equipment Technology or Biomedical Engineering Technology or in a related technical field such as Electronic Technology or Information Technology. AND Two years of experience as a Biomedical Equipment Support Specialist, Biomedical Equipment Technician, Field Service Engineer, Medical Equipment Repairer, or Information Technology Specialist.. OR Bachelor's degree in Biomedical Engineering Technology or in a related field such as Electronics Engineering Technology (EET) or Information Technology. OR Completion of a military training program in biomedical equipment. AND Two years of experience as a Biomedical Equipment Support Specialist or Biomedical Equipment Technician, Field Service Engineer, Medical Equipment Repairer or Information Technology Specialist. Licensure/Certification/Registration: None Grade Determinations: Supervisory Biomedical Equipment Support Specialist, GS-13 Experience At least one year of experience at the GS-12 grade level that demonstrates the technical competencies described at that level. AND Demonstrated Knowledge, Skills, and Abilities (KSAs):In addition to meeting the KSAs at the GS-12 grade level, the candidate must demonstrate all of the following KSAs and demonstrate the potential to acquire the assignment-specific KSAs designated by an asterisk (*): Ability to work independently to set priorities, delegate tasks, meet multiple deadlines, analyze organizational problems, and develop and implement effective solutions to optimize quality, efficiency, performance, and productivity within the service. Ability to develop policy; manage medical equipment life-cycle processes; and provide workload analysis in Healthcare Technology Management operations. Ability to translate management goals and objectives into well-coordinated and controlled biomedical work operations. *Ability to perform the full range of supervisory duties which would include responsibility for assignment of work to be performed; assessments of competency; evaluation of performance; selection of staff; and recommendation of awards, advancements, and when appropriate, disciplinary actions. Assignments Supervisory Biomedical Engineering Support Specialists are generally found in Complexity Level 1 (High Complexity) facilities. The supervisory BESS is responsible for the supervision, administrative management, and direction of lower level BESSs. The incumbent supports the Chief Biomedical Engineer with assisting in the administrative and professional responsibilities of planning and directing the Biomedical Engineering/Healthcare Technology Management staff activities for the service or equivalent unit at an independent outpatient clinic. Incumbent may have full supervisory responsibility over a section or equivalent work unit if there is not a Biomedical Engineer at the facility. Typical duties may include: preparing work assignments, monitoring medical equipment life-cycle management performances of Biomedical Engineering/Healthcare Technology Management staff, conducting performance appraisals, and other technical and administrative responsibilities to ensure that the mission of the service and the medical center has been satisfied. The supervisor assures compliance with accrediting agency and regulatory requirements; establishes and monitors the quality of the pre-analytical processes as part of the overall Biomedical Engineering service quality management program, and assures corrective action is initiated as needed. The supervisor assures orientation and competency assessment of assigned staff. The supervisor develops policies and procedures, manages document control, develops performance standards, position descriptions and functional statements. They may be responsible for professional and administrative management of an assigned area to include budget execution. The supervisor will maintain interdepartmental relations with other services to accomplish medical center goals. Preferred Experience: Lifecycle Management of any and all medical systems such as imaging, life support, dialysis, and monitoring to include physical and network support. Completes both routine and complex assignments involved in the installation, maintenance, modification, troubleshooting, repair and calibration of these complex therapeutic, diagnostic and life support medical devices and systems. This position is above the full performance level, and will be hired at GS-13. References: VA Handbook 5005/95, Part II, Appendix G49 Physical Requirements: See VA Directive and Handbook 5019, Employee Occupational Health Service.

Education

IMPORTANT: A transcript must be submitted with your application if you are basing all or part of your qualifications on education.

Note: Only education or degrees recognized by the U.S. Department of Education from accredited colleges, universities, schools, or institutions may be used to qualify for Federal employment. You can verify your education here: http://ope.ed.gov/accreditation/. If you are using foreign education to meet qualification requirements, you must send a Certificate of Foreign Equivalency with your transcript in order to receive credit for that education. For further information, visit: http://www.ed.gov/about/offices/list/ous/international/usnei/us/edlite-visitus-forrecog.html.

Contacts

• Address Cheyenne VA Medical Center 2360 East Pershing Boulevard Cheyenne, WY 82001 US
• Name: Theophil Bruce
• Phone: 6304188682
• Email: [email protected]