This position is located in the Office of Aviation Safety (OAS), Aviation Engineering Division (AED) in Washington, D.C. Participates, investigates, and directs engineering aspects of general aviation and air carrier accidents involving safety issues associated with aircraft flight control, hydraulic, electrical, avionic and pneumatic systems including design, manufacturing, certification and maintenance conditions.

Duties

OAS investigates all U.S. civil aviation accidents, including those involving unmanned aircraft systems (UAS), public aircraft, and commercial space launches, and other significant aviation incidents, proposes the probable causes of these events, and develops recommendations to minimize recurrence. The ideal candidate has previous, hands on, experience conducting engineering investigations of aircraft system failures or system component failures. The ideal candidate has experience with a variety (many) of different aircraft systems. The ideal candidate is comfortable leading and/or working with groups of diverse industry and government representatives. As an Aerospace Engineer (Systems) - DIRECT-HIRE, GS-0861-14, you will perform the following major duties: At the GS-14, typical duties may include: Participates and directs technical analyses of general aviation and air carrier accidents and incidents in the specialty area of flight controls, avionics, electrical, hydraulic, and pneumatic systems. Serve as Group Chairman, documenting and analyzing airworthiness issues potentially involved in accidents and develops accident prevention strategies. Coordinate efforts with other Group Chairman, the IIC, and the Team Lead to assure thoroughness of all investigations and that necessary documentation is accomplished as a result of the investigative activity. Prepares factual and analytical reports covering specialty area on each accident. Correlate these findings with those of other Group Chairmen to assist in identifying the causes(s) of the accident. Assists the IIC and report writers in the preparation of the Safety Board's accident report with particular emphasis on the accuracy of factual information and the logic of analyses of the evidence from the investigation. Critically reviews drafts of the Safety Board's accident reports and provides constructive and timely feedback to improve the technical accuracy and logic presented in these reports. Researches and develops appropriate safety recommendations to correct hazardous or unsafe conditions using information obtained in the course of investigations, personal observations, and knowledge of current aviation engineering trends and developments. Acts as an advisor to the US Accredited Representative on foreign investigations. May be required to act as the US Accredited Representative to foreign investigations. Prepare presentations and responds to Member's questions at Board meetings following the conclusion of major investigations or projects. Work Environment: The incumbent supports major go-team launches as well as significant international investigations. Major go-team launch teams commonly travel on the Federal Aviation Administration (FAA) jet from Reagan National Airport within two hours after an accident notification is received. Timely arrival at the scene of a major accident allows for timely documentation of a wreckage; a delay in this effort can have significant impacts, such as impeding the re-opening of an airport. International travel by US Government employees frequently requires the issuance of a visa from the host country, which is most efficiently obtained at the embassies located in Washington, DC. Additionally, security concerns in many locations make it essential that the investigative team travel together. Physical Demands: Occasionally the aircraft wreckage may contain hazardous materials that may be burning by the time the investigator arrives on-the-scene. The incumbent may be exposed to a variety of weather conditions and other environmental discomforts such as remote, rugged, snow, rain, temperature extremes, swampy or mountainous areas and hostile settings. Investigators may have to wear a hardhat, safety shoes, goggles, gloves, and other protective equipment.

Requirements

• U.S. Citizenship.
• Males born after 12/31/59 must be registered for Selective Service.
• Resume and supporting documents (see "How to Apply" section.).
• Suitability for Federal employment.
• Financial Interest in transportation enterprises will be evaluated on a case by case basis.
• Bargaining Unit Position: Yes - Bargaining unit represented by NTSB-AFGE Local 2211.
• Direct Deposit is required.
• A probationary period may be required.
• You may be required to complete a Confidential Financial Disclosure Report, OGE-450, upon entering the position and annually.
• This position is not eligible for remote telework.
• Applicants must meet all qualifications and eligibility requirements by the closing date of the announcement.

Qualifications

This is a direct-hire vacancy announcement that will be used to fill current vacancies and subsequent vacancies as they occur. To receive consideration for vacancies, applicants must submit complete applications prior to the established cut-off date(s). An initial cut-off will take place December 13, 2023 to begin initial applicant consideration. Applications received after the initial cut-off date will be considered upon receipt of the next cut-off date. The established cut-off dates are as follows: January 12, 2024 February 12, 2024 March 12, 2024 April 12, 2024 May 13, 2024 You must meet the "Education Requirements" and the "Specialized Experience" to qualify for this position as described below. SPECIALIZED EXPERIENCE REQUIREMENTS: GS-14: You MUST have one year of specialized experience equivalent to at least the GS-13 grade level in the Federal service (experience may have been gained in the private sector), performing the following types of specialized experience defined as: (1) Demonstrated understanding of Federal Aviation Administration (FAA) regulations requirements (Part 23, 25, 43) or equivalent military specifications with aircraft systems engineering experience; (2) Demonstrated understanding of how to apply engineering concepts and principles to the design, testing, evaluation, or troubleshooting of aircraft systems and components; (3) Strong communication skills to explain technical concepts to non-technical and senior decision-makers; (4) Interprets engineering schematics and other technical documentation related to aircraft systems, (using these skills to develop recommendations to improve aviation safety, evaluate aircraft systems performance, determine aircraft system potential failure modes and their characteristics, develop test plans and procedures for aircraft systems, develop new troubleshooting procedures for aircraft systems, and/or determine the system level effect of a known defect or problem within a aircraft system). In addition to the education and specialized experience, you must possess the skill to write comprehensive complex investigation technical reports. For more information see link: https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/0800/aerospace-engineering-series-0861/ NOTE: Your resume must clearly show the specialized experience and competencies related to this position. Failure to demonstrate how you possess the education, specialized experience and competencies will result in an "Ineligible" rating.

Education

This position has a positive education requirement: Applicants must submit a copy of their college or university transcripts(s) and certificates by the closing date of announcement to verify qualifications. If selected, an official transcript will be required prior to appointment.

BASIC EDUCATION REQUIREMENTS:

Degree: Engineering. To be acceptable, the program must: (1) lead to a bachelor's degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.

-OR-

Combination of education and experience -- college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:

1. Professional registration or licensure -- Current registration as an Engineer Intern (EI), Engineer in Training (EIT)1, or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.

2. Written Test -- Evidence of having successfully passed the Fundamentals of Engineering (FE)2 examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico.

3. Specified academic courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A.

4. Related curriculum -- Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all-inclusive.)

You MUST provide transcripts or other documentation to support your educational claims. Unless otherwise stated: (1) official or unofficial transcripts are acceptable, or (2) you may submit a list with all your courses, grades, semester, year, and credit for the course. All materials must be submitted by the closing date of the announcement.

GENERAL EDUCATION: All academic degrees and coursework must be completed at an institution that has obtained accreditation or pre-accreditation status from an accrediting body recognized by the U.S. Department of Education for it to be credited towards qualifications. For a list of schools that meet these criteria, see https://www.ed.gov/accreditation?src=rn. Applications submitted without the required supporting documents will not be accepted. An unofficial transcript; statement from the institution's registrar, dean, or other appropriate official; or equivalent documentation is acceptable at the time of application. Education submitted must be appropriately accredited by an accredited body recognized by the Secretary of the U.S. Department of Education. For additional information, refer to the U.S. Department of Education web site at: http://www.ed.gov

FOREIGN EDUCATION: If you are using education completed in foreign colleges or universities to meet the qualification requirements, you must show the education credentials have been evaluated by a private organization that specializes in interpretation of foreign education programs and such education has been deemed equivalent to that gained in an accredited U.S. education program; or full credit has been given for the courses at a U.S. accredited college or university. For further information, visit: https://www2.ed.gov/about/offices/list/ous/international/usnei/us/edlite-visitus-forrecog.html

Contacts

• Address AS Aviation Safety 490 L'Enfant Plaza East SW Washington, DC 20594 US
• Name: Human Resources Division
• Email: [email protected]