Click on "Learn more about this agency" button below to view Eligibilities being considered and other IMPORTANT information. The primary purpose of this position is to serve as a senior professional engineer with Modeling and Simulation (M&S) engineering responsibility and to advise functional managers of selected specialties in program analysis, program management, communications/computer, and engineering.

Duties

Performs multidisciplinary professional engineering work involving the application of electronics, mechanical, aerospace, and/or other engineering disciplines and Modeling and Simulation (M&S) expertise to determine the business and technical needs of customers in the acquisition, development, or sustainment of weapon systems, sub-systems, support systems, equipment items, or an equivalent product. Functions as the organization's technical specialist in developing system performance requirements, objectives and integration, and the estimation of time and resources for system design, development, and support. Performs complex and comprehensive analyses and uses systematic, disciplined, and quantifiable approaches to determine performance objectives and integration issues. Serves as a consultant and technical/M&S expert to senior subject matter specialists and/or agency officials responsible for broad program operations.

Requirements

• U.S. Citizenship Required
• Males must be registered for Selective Service, see www.sss.gov
• Selectee is expected to be granted with and/or maintain the appropriate security clearance required for the position.
• Relocation costs or other incentives may be available and considered by the organization.
• This posn is subject to provisions of the DoD Priority Placement Program
• This position may require drug testing and the candidate may be subject to passing a drug test upon selection.
• Work may occasionally require travel away from the normal duty station on military or commercial aircraft.
• Selectee may be required to serve a probationary or trial period.
• Disclosure of Political Appointments
• Direct Deposit: All federal employees are required to have direct deposit.
• This position meets the professional exemption criteria for the Fair Labor Standards Act (5 CFR 551.207).
• This position has been designated as an acquisition Position and is covered by the Acquisition Professional Development Program (APDP).

Qualifications

Experience requirements are described in the Office of Personnel Management (OPM) Qualification Standards for General Schedule Positions, Professional and Scientific Positions. Due to the use of 120-day rosters, this period of experience may be completed within 120 days of the closing date of this announcement. Basic Qualification Requirement: You must meet one of the following qualification requirements by the closing date of the announcement and provide documentation to support your qualifications (If you are using education to qualify, failure to submit the required documentation will result in you being rated ineligible. See sections on "College Transcripts" and "Foreign Education" below for required documentation.): To view qualifying educational requirements and/or combination of education and specialized experience click on the following link: http://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/0800/all-professional-engineering-positions-0800/ A. Degree: Have a Bachelor's Degree in professional engineering from a curriculum (1) in a school of engineering with at least one curriculum accredited by the Accreditation Board for Engineering and Technology (ABET) as a professional engineer curriculum; or (2) include differential and integral calculus and courses (beyond first-year physics and chemistry) in five of the following seven areas of engineering science or physics; (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. OR B. Education/Experience: Have a combination of education and experience--college level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying professional engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences, and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following: 1. Professional Registration. Have current registration as a professional engineer. 2. Written Test. Have evidence of successfully passing the written test required for professional registration or have successfully passed the Engineer-in-Training (EIT) examination and have completed all the requirements for either (a) a Bachelor's Degree in Engineering Technology (BET) from an accredited college or university that included 60 semester or 90 quarter hours of courses in the physical, mathematical, and engineering sciences, or (b) a BET from a program accredited by ABET. 3. Specified Academic Courses. Have successfully completed at least 60 semester or 90 quarter hours of courses in the Physical, Mathematical, and Engineering sciences and in Engineering that included the courses specified in "A" above. 4. Related Curriculum. Successful completion of a curriculum leading to a bachelor's degree in engineering technology or in an appropriate professional field, e.g., physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all-inclusive.) Additional Qualification Requirement (Specialized Experience). Must have at least 1 year of specialized experience at the next lower grade level or band or equivalent pay scale providing professional engineering, technical, and Modeling and Simulation (M&S) expertise in technology applications to support development of new and emerging technology systems. It may have been gained in the private sector, volunteer service, military service, and/or government service, etc. FEDERAL TIME-IN-GRADE (TIG) REQUIREMENT FOR GENERAL SCHEDULE (GS) POSITIONS: Merit promotion applicants must meet applicable time-in-­grade requirements to be considered eligible. One year at the GS-12 level is required to meet the time-in-grade requirements for the GS-13 level. TIG applies if you are in a current GS position or held a GS position within the previous 52 weeks. KNOWLEDGE, SKILLS AND ABILITIES (KSAs): Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the following areas: 1. Knowledge of a wide range of multidisciplinary professional engineering and Modeling and Simulation (M&S) concepts, principles, practices, standards, methods, techniques, materials, and equipment to effectively apply advanced engineering theories, principles, and concepts to project development, execution, and advisory services. 2. Knowledge of development engineering and M&S methodologies sufficient to apply experimental theories and/or new applications to issues and provide technical advice and direction in support of weapon systems, subsystems, and/or support equipment. 3. Knowledge of Windows and Linux operating systems and coding abilities in C++, Python, and Matlab. 4. Knowledge of systems engineering practices and procedures as they pertain to sustainment, modification, logistics, and production management principles, concepts, policies, and systems. 5. Knowledge of the principles of planning and program management; of standard acquisition regulations, practices, and procedures; and of other engineering disciplines used in support of sustainment, modification, and maintenance programs. 6. Ability to devise and evaluate criteria, parameters, characteristics, and interrelationships for design approaches; to assess the impact of new technology on current systems and processes; and to gather, assemble, and analyze facts, form conclusions, and devise and recommend solutions to problems. 7. Ability to communicate clearly, concisely, and with technical accuracy, both orally and in writing, as well as work in a professional manner with peers, management, contractors, academia, and other agencies. PART-TIME OR UNPAID EXPERIENCE: Credit will be given for appropriate unpaid and or part-time work. You must clearly identify the duties and responsibilities in each position held and the total number of hours per week. VOLUNTEER WORK EXPERIENCE: Refers to paid and unpaid experience, including volunteer work done through National Service Programs (i.e., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student and social). Volunteer work helps build critical competencies, knowledge and skills that can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience.

Education

IF USING EDUCATION TO QUALIFY: If position has a positive degree requirement or education forms the basis for qualifications, you MUST submit transcriptswith the application. Official transcripts are not required at the time of application; however, if position has a positive degree requirement, qualifying based on education alone or in combination with experience, transcripts must be verified prior to appointment. An accrediting institution recognized by the U.S. Department of Education must accredit education. Click here to check accreditation.

FOREIGN EDUCATION: Education completed in foreign colleges or universities may be used to meet the requirements. You must show proof the education credentials have been deemed to be at least equivalent to that gained in conventional U.S. education program. It is your responsibility to provide such evidence when applying.

Contacts

• Address AF Life Cycle Management Center 2000 Allbrook Drive Wright Patterson AFB, OH 45433 US
• Name: Total Force Service Center
• Phone: 1-800-525-0102
• Email: [email protected]