Click on "Learn more about this agency" button below to view Eligibilities being considered and other IMPORTANT information. The primary purpose of this position is to to serve as a senior professional engineer, performing programming and base development duties in support of Eglin AFB.

Duties

Perform planning, evaluates and recommends programs and development plans for substantial multi-phase new construction, renovation, and improvement projects for a variety or real property facilities, including utility systems utilizing a professional knowledge of engineering disciplines and related fields. Serve as consulting engineer on all aspects of assigned projects. Works with organizational managers, budgeting personnel and higher engineering authority including command and developing and gaining approval for proposed facility programs/projects. Coordinates projects with engineers in other disciplines or with architects. Keeps abreast of emerging technologies to ensure programmed development will not prematurely become obsolete. Complies with health, safety, and environmental rules and procedures and performs work in a manner that enhances the safety of the work environment.

Requirements

• U.S. Citizenship Required
• Males must be registered for Selective Service, see www.sss.gov
• Selectee is expected to be granted with and/or maintain the appropriate security clearance required for the position
• Selectee may be required to serve a probationary or trial period
• Relocation costs or other incentives may be available and considered by the organization
• This posn is subject to provisions of the DoD Priority Placement Program
• This position may require drug testing and the candidate may be subject to passing a drug test upon selection
• Employee may be required to work other than normal duty hours, to include evenings, weekends and/or holidays
• Shift work and emergency overtime may be required
• Employee must maintain current certifications
• Disclosure of Political Appointments
• Direct Deposit: All federal employees are required to have direct deposit.
• The work may require the employee to drive a motor vehicle. An appropriate, valid driver's license may be required for position.
• May act as a project liaison with the Army Corps of Engineers or other planning or design agencies as required.
• May be required to serve on A and E selection of boards, quarterly/annual awards boards and other duties as required.
• Bachelors degree in a school of engineering with at least one program accredited by ABET required.

Qualifications

Experience requirements are described in the Office of Personnel Management (OPM) Qualification Standards for General Schedule Positions, General Engineering Series 0801, locate here . Due to the use of 120-day rosters, this period of experience may be completed within 120 days of the closing date of this announcement. BASIC REQUIREMENT OR INDIVIDUAL OCCUPATIONAL REQUIREMENT: A) Degree: Engineering. To be acceptable, the program must: (1) lead to a bachelor's degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. NOTE: YOU MUST SUBMIT COPIES OF YOUR TRANSCRIPTS. OR B) Combination of education and experience -- college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following: 1. Professional registration or licensure -- Current registration as an Engineer Intern (EI), Engineer in Training (EIT)1 , or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions. 2. Written Test -- Evidence of having successfully passed the Fundamentals of Engineering (FE)2 examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico. 3. Specified academic courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A. 4. Related curriculum -- Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all inclusive.) NOTE: YOU MUST SUBMIT COPIES OF YOUR TRANSCRIPTS. In addition to meeting the basic requirement above, to qualify for this position you must also meet the qualification requirements listed below: SPECIALIZED EXPERIENCE: Applicants must have at least one year (52 weeks) of specialized experience at the next lower grade GS-11, or equivalent in other pay systems. Examples of specialized experience includes civil, mechanical, electrical and architectural engineering concepts, principles, and practices and extensive familiarity with other engineering disciplines and architecture as well as engineering and construction standards. Also providing technical expertise to develop new or improved techniques for the design, modification, operation, and maintenance of facilities and processes; and administration and compliance with related legislated environmental programs. Note: Creditable experience may include previous military experience, experience gained in the private sector, or experience gained in another government agency. NOTE: Due to the use of 120-day rosters, this period of experience may be completed within 120 days of the closing date of this announcement. FEDERAL TIME-IN-GRADE (TIG) REQUIREMENT FOR GENERAL SCHEDULE (GS) POSITIONS: Merit promotion applicants must meet applicable time-in-­grade requirements to be considered eligible. One year at the GS-11 level is required to meet the time-in-grade requirements for the GS-12 level. TIG applies if you are in a current GS position or held a GS position within the previous 52 weeks. KNOWLEDGE, SKILLS AND ABILITIES (KSAs): Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the following areas: 1. Professional of a broad range of general (civil, mechanical, electrical and architectural) engineering concepts, principals, and practices and extensive familiarity with other engineering disciplines and architectural. 2. Knowledge of a broad range of engineering and construction standards, methods, practices, and techniques, materials, and equipment to determine compliance with federal, state, and local codes and regulations. 3. Knowledge of standard contracting regulations, practices, and procedures. 4. Knowledge of automated data processing concepts, systems capabilities. and economic usage to effectively accomplish assigned functions. 5. Knowledge of health, safety, and environmental requirements as outlined in applicable standards, regulations, and/or technical orders. 6. Knowledge of program planning and budgeting cycles, financial control and budget systems, and management. 7. Knowledge of environmental principles, practices, procedures, laws, regulations, and current legislative issues. 8. Knowledge of work classifications and the regulatory and statutory restrictions on the expenditures of appropriated and non-appropriated funds. 9. Ability to plan, conduct, and record site/facility and inspections. 10. Ability to research, analyze, interpret, and apply rules, regulations, and procedures in a variety of situations and recommend timely and economical solutions. 11. Ability to plan and organize work and coordinate work of other engineering disciplines and architects. PART-TIME OR UNPAID EXPERIENCE: Credit will be given for appropriate unpaid and or part-time work. You must clearly identify the duties and responsibilities in each position held and the total number of hours per week. VOLUNTEER WORK EXPERIENCE: Refers to paid and unpaid experience, including volunteer work done through National Service Programs (i.e., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student and social). Volunteer work helps build critical competencies, knowledge and skills that can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience.

Education

IF USING EDUCATION TO QUALIFY: If position has a positive degree requirement or education forms the basis for qualifications, you MUST submit transcriptswith the application. Official transcripts are not required at the time of application; however, if position has a positive degree requirement, qualifying based on education alone or in combination with experience, transcripts must be verified prior to appointment. An accrediting institution recognized by the U.S. Department of Education must accredit education. Click here to check accreditation.

FOREIGN EDUCATION: Education completed in foreign colleges or universities may be used to meet the requirements. You must show proof the education credentials have been deemed to be at least equivalent to that gained in conventional U.S. education program. It is your responsibility to provide such evidence when applying.

Contacts

• Address AF Test Center 6437 6th Street Bldg 430, Rm 119 Hill AFB, UT 84056 US
• Name: Total Force Service Center
• Phone: 1-800-525-0102
• Email: [email protected]