About the Position: This position is within the U.S. Army Corps of Engineer, Engineering and Construction Division, Design Branch, Civil Section located in Philadelphia, PA. This position will be filled temporary not to exceed three years. The work schedule will be part-time not to exceed 16 hours per pay period.

Duties

You will serve as civil engineer performing designs, scheduling and determining priorities of assigned projects. Determining need of Architect-Engineering (A-E) services and develops scope and estimated cost of work; preparing commercial advertisement of A-E work and participates on the A-E pre-selection and selection boards; reviewing A-E work. Represents the Corps in coordinating and negotiating projects with other Government entities, environmental groups, etc. Major duties include: Perform and/or direct the planning, coordination, evaluation and preparation of a variety of engineering investigations, designs, and reports for Civil works, Military facilities and other Federal agencies. Participates in Corp-wide conferences: represents the District at meetings with Federal, State and local officials; and may either write reports, make recommendations, or testify as an expert witness. Plan and direct the preparation of and/or prepares all construction specifications, evaluations of construction materials to determine their suitability for use and their compliance, and reviews of A-E prepared specifications. Participate on field inspection teams on periodic inspections of District dams, local flood protection projects, dams and flood protection projects for other districts and agencies, and on staff inspections of projects under construction. Responsible for coordinating external and internal work; mentoring less experienced civil design engineers, and preparing budgetary estimates and comparative cost studies of civil design features.

Requirements

• Appointment may be subject to a suitability or fitness determination, as determined by a completed background investigation.
• Position requires a valid state issued driver’s license.
• This position has a Temporary Duty (TDY) or business travel requirement of up to 5% of the time.

Qualifications

Who May Apply: Only applicants who meet one of the employment authority categories below are eligible to apply for this job. You will be asked to identify which category or categories you meet, and to provide documents which prove you meet the category or categories you selected. See Proof of Eligibility for an extensive list of document requirements for all employment authorities. Interagency Career Transition Assistance Plan In order to qualify, you must meet the education and experience requirements described below. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social). You will receive credit for all qualifying experience, including volunteer experience. Your resume must clearly describe your relevant experience; if qualifying based on education, your transcripts will be required as part of your application. Additional information about transcripts is in this document. To qualify for this position, you must have at least one year of specialized experience equivalent to the GS-11 level in the federal service. Specialized experience is defined as preparing engineering plans and designs related to coastal structures, site development, flood control structures, stream bank erosion protection and/or environmental restoration of streams and wetlands. This definition of specialized experience is typical of work performed at the next lower grade/level position in the federal service (GS-11). You will be evaluated on the basis of your level of competency in the following areas: Civil EngineeringDesignProblem SolvingProject Management Time in Grade Requirement: Applicants who have held a General Schedule (GS) position within the last 52 weeks must have 52 weeks of Federal service at the next lower grade or equivalent (GS-11).

Education

Basic Requirement for Civil Engineer:
A. Degree: Bachelor's degree (or higher degree) in engineering. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher degree) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); OR (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.

OR

B. Combination of Education and Experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:

1. Professional registration or licensure - Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.

2. Written Test - Evidence of having successfully passed the Fundamentals of Engineering (FE) examination, or any other written test required for professional registration, by an engineering licensure board in the various States, the District of Columbia, Guam, or Puerto Rico.

3. Specified academic courses - Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in A above. The courses must be fully acceptable toward meeting the requirements of an engineering program.

4. Related curriculum - Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions.

FOREIGN EDUCATION: If you are using education completed in foreign colleges or universities to meet the qualification requirements, you must show the education credentials have been evaluated by a private organization that specializes in interpretation of foreign education programs and such education has been deemed equivalent to that gained in an accredited U.S. education program; or full credit has been given for the courses at a U.S. accredited college or university. For further information, visit: http://www.ed.gov/about/offices/list/ous/international/usnei/us/edlite-visitus-forrecog.html

Contacts

• Address RD-W2SF04 US ARMY ENGINEER DIST-PHILADELPHIA DO NOT MAIL Philadelphia, PA 19103 US
• Name: Army Applicant Help Desk