You will serve as the Supervisory Distinguished Engineer or Scientist, Deputy Executive Director (DED) for Digital Transformation in the Naval Surface Warfare Center (NSWC) Carderock Division of Naval Sea Systems Command (NAVSEA).

Duties

You will lead discussions, collaborate with, and work to resolve technical challenges with Navy Program Executive Offices, Naval Sea Systems Command (NAVSEA) Directorates, and other organizations. You will support the WC Commander and Executive Director (ED) in developing and implementing plans, policies and procedures to advance the mission, priorities and strategic objectives of the two WCs, including those of their subordinate commands. You will advise the Commander and ED on internal and external technical, business, operational and organizational opportunities, strategies and risks in order to strengthen the command's missions and continued relevance to the Navy. You will assess the technical, business, and administrative policies required to achieve Warfare Center (WC) goals, and propose changes when appropriate. You will lead special projects as assigned by the Commander or ED on matters of particular interest or urgency. You will collaborate closely with the other two DEDs and the WC leadership and staff in aligning the operations of both commands consistent with the NAVSEA Warfare Centers Concept of Operations.

Requirements

• Must be a US Citizen.
• Must be determined suitable for federal employment.
• Must participate in the direct deposit pay program.
• New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov
• Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.
• Males born after 12-31-59 must be registered for Selective Service.
• You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.
• This position is covered under the Defense Acquisition Workforce Improvement Act (DAWIA). Certification in the Acquisition Functional Area and category assigned to the position is required within established category timeframes.
• Successful completion of a pre-employment drug test (including marijuana) is required. A tentative offer of employment will be rescinded if you fail to report to the drug test appointment or fail the test. You will be subject to random testing.
• This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.
• You will be required to complete ethics orientation within three months of appointment and submit a Confidential Financial Disclosure Report, OGE-450, within 30 days of appointment.
• Supervisors in the executive branch have a heightened personal responsibility for advancing government ethics. You will be required to review the 14 General Principles of Ethical Conduct at 5 CFR 2635.101.

Qualifications

The applicant is to provide a separate narrative statement which describes fully, but concisely, how his/her experience supports each of the following Mandatory Technical Qualifications. Each technical qualification narrative should not exceed 2 pages. Failure to address these specific qualifications in a separate narrative statement will eliminate you from consideration: 1. Must demonstrate the ability to lead and manage a large technical organization performing full spectrum life cycle support of complex naval systems. 2. Knowledge of business and financial management systems and principles, and the ability to plan and direct technical and business functions. 3. Demonstrated ability to manage and integrate the business functions of a full spectrum engineering mission-oriented organization including human capital, financial, acquisition, information technology/cybersecurity and corporate operations. 4. Ability to analyze complex management processes, establish effective working relationships with process stakeholders having differing interests, and improve the processes to the overall benefit of the organization. 5. Must demonstrate the ability to enable digital transformation and accelerate organizational processes through development and implementation of a digital strategy that is aligned with higher-level goals and objectives. Develop and implement plans to generate, collect and analyze digital data to improve the speed, quality and effectiveness of organizational processes. Additional qualification information can be found from the following Office of Personnel Management website: https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/#url=GS-PROF; and 0801 Professional Engineering Series 1515 Operations Research Series Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment.

Education

Applicants must meet the following positive education qualifications requirements of the Office of Personnel Management (OPM) Qualifications Standards Manual:

For 0801 Professional Engineering Series:
A. Degree: Engineering. Successful completion of a bachelor's or higher engineering degree from an accredited college or university. To be acceptable, the program must: (1) lead to a bachelor's degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. Such education must demonstrate the knowledge, skills, and abilities necessary to do the work of the position.
-or-
B. Combination of education and experience -- college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:
(I) Professional registration or licensure -- Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions; or
(II) Written Test -- Evidence of having successfully passed the Fundamentals of Engineering (FE) examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico; or
(III) Specified academic courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A; or
(IV) Related curriculum -- Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all inclusive.)

OR

For 1515 Operations Research Series:
Successful completion of a degree in operations research; or, A degree with at least 24 semester hours in a combination of operations research, mathematics, probability, statistics, mathematical logic, science, or subject-matter courses requiring substantial competence in college-level mathematics or statistics. At least 3 of the 24 semester hours must have been in calculus.

An advanced degree of Master's or Ph.D. in one of the educational fields listed above is highly desirable.

Contacts

• Address NAVAL SURFACE WARFARE CENTER CMD 9500 MacArthur Blvd West Bethesda, MD 20817-5700 US
• Name: Dept of the Navy Executive Hiring
• Email: usn.seattle-wa.ochrsvdopscenwa.mbx.don-executive-hiring@us.navy.mil