Opened Area(s) of Consideration: 1, 2 DEFINITION OF AREA(S) OF CONSIDERATION: Area 1 - AKNG Permanent or Indefinite technicians. Area 2 - All AKNG members. PDCN: D0872P01 Selecting Supervisor: Michael Edwards

Duties

Performs operational checks, inspections, tests and troubleshooting on electronic integrated systems composed of a number of sensor subsystems: Integrated Vehicle Health Management System (IVHMS), the Common Missile Warning System (CMWS), the Improved Countermeasure Dispenser System (ICMD), the Night Vision Goggle System (NVG), the Air Data Subsystem, the Attitude Heading Reference System (AHRS) and Doppler/GPS Navigation System (DGNS), Command Instrument Set (CIS) ; a logic subsystem-- the Multiplex Data Bus System (MUX), the Multiplex Remote Terminal Units (MRTU), Data Link Terminal Units (DLTU), and Digital Automatic Flight Control System (DAFCS); and actuating subsystems--, and the Digital Automatic Stabilization System (DASS), which includes the Stability Augmentation System (SAS) and Command Augmentation System (CAS) and Hover Augmentation System (HAS). Completes operational checks, inspections, tests and troubleshooting of Line Replaceable Units (LRU). Isolates unusual malfunctions using technical manuals, schematics, and wiring diagrams, tools and test equipment including automatic test equipment. Solves problems by analyzing installation, circuitry, and operating characteristics of the systems. Adjusts and aligns sensors, transmitters, amplifiers, power supplies, display devices, controls, actuators, servos, computers and other related components. Removes faulty LRUs for shop repair. Installs serviceable components into aircraft and performs total systems alignments in accordance with existing technical manuals and directives. Accomplishes technical manual compliance and modification of components and systems and completes systems checkout for proper operation. Maintains, modifies, calibrates and inspects a wide variety of user test, measurement, and diagnostic equipment (TMDE). Completes bench check, testing, repair, inspection, modification, programming, reprogramming, mating, adjusting, alignment, and analyzing of LRUs and shop replaceable units. Uses a variety of test equipment such as automatic test equipment (ATE), oscilloscopes, DTA computer, multi-meters, power-meters, and special purpose bench test sets. Tests and troubleshoots solid state electronic assemblies and subassemblies such as circuit cards, modules, rate gyros, electronic control amplifiers, electro-mechanical assemblies, random access memories, programmable read-only memories and various integrated circuits. Identifies faulty parts and repairs to level authorized. Ensures and certifies operational integrity of various night vision systems, and electro-optical components. Reassembles unit after repair, performs alignment and makes shop checks. Recommends methods to improve equipment performance, technical data, and maintenance procedures by reporting hardware and software malfunctions, initiates material deficiency reports both on equipment and in technical data, and assists in design changes as necessary. Conducts debriefing of aircrews to determine the nature of system malfunctions, then documents all maintenance performed and records information related to the system, LRU's, or shop repairable units on both aircraft and historical records. When designated on NGB Flying Status Orders, serves as member of flight crew for the purpose of diagnosing and recording malfunctions, or otherwise determining maintenance and repair requirements. Guides lower level mechanics in the performance of duties. Conducts on-the-job training on assigned systems and related support equipment and tasks to include classroom instruction as necessary. Processes and accounts for due-in supply assets. Ensures that material and equipment are properly stored, protected and maintained and that funds are not obligated for material or parts without proper justification. Prepares for and participates in various types of readiness evaluations such as Operational Readiness Evaluations (ORE), Command Logistics Readiness Inspections (CLRT-X), and Aviation Resource Management Surveys. May be required to perform additional duties such as structural firefighting, aircraft handling, heavy equipment operation, and maintenance of facilities and equipment, or serve as a member of a team to cope with natural disasters or civil emergencies. Complies with safety, fire, security, and housekeeping regulations. Performs other duties as assigned.

Requirements

• Alaska Army National Guard membership is required.
• Males born after 31 December 1959 must be registered for Selective Service.
• Federal employment suitability as determined by a background investigation.
• May be required to successfully complete a probationary period.
• U.S. Citizenship and Secret Clearance is required.
• Bargaining Unit: Bargaining
• If hired, this position may require regular Occupational Health exams and/or medical standards being met.
• May require participation in random drug testing.
• APPOINTMENT FACTORS: Excepted/Enlisted in the Alaska Army National Guard.
• MILITARY GRADE REQUIREMENT: Due to the nature of this position, the minimum military grade is Specialist (SPC/E4) and the maximum military grade is Sergeant First Class (SFC/E7).
• MOS REQUIREMENT: Due to the nature of this position, you must currently hold an MOS in the 15 series.
• DESIRABLES: Experience with HH-60M and CH-47F aircraft.

Qualifications

SPECIALIZED EXPERIENCE is experience which is directly related to the position to be filled and which has equipped you with the particular knowledge, skills and abilities to successfully perform the duties of this position. WG-12- Must have at least 24 months of skill, knowledge, and abilities of the FWS 2610 work at the Electronics Branch of an Army Aviation Support Facility (AASF), Army Aviation Flight Activity (AAFA), or Theatre Aviation Sustainment Maintenance Group (TASMG). Must have competencies in performing electronic integrated systems work activities on Army National Guard helicopters such as, installing, troubleshooting, repairing, modifying, calibrating, aligning, and maintaining these systems. Skilled in performing operational checks, inspections, tests, and troubleshooting on electronic integrated systems composed of a number of sensor subsystems: Integrated Vehicle Health Management System (IVHMS), the Common Missile Warning System (CMWS), the Improved Countermeasure Dispenser System (ICMD), the Night Vision Goggle System (NVG), the ARNG Data Subsystem, the Attitude Heading Reference System (AHRS) and Doppler/GPS Navigation System (DGNS), Command Instrument Set (CIS); a logic subsystem-- Multiplex Data Bus System (MUX), the Multiplex Remote Terminal Units (MRTU), Data Link Terminal Units (DLTU), and Digital Automatic Flight Control System (DAFCS); and actuating subsystems--Digital Automatic Stabilization System (DASS), which includes the Stability Augmentation System (SAS) and Command Augmentation System (CAS) and Hover Augmentation System (HAS). Skilled in conducting operational checks, inspections, tests and troubleshooting of Line Replaceable Units (LRU). Experienced in isolating unusual malfunctions using technical manuals, schematics, and wiring diagrams, tools and test equipment including automatic test equipment. Competent in identifying and solving problems system concerns by analyzing installation, circuitry, and operating characteristics of these systems. Skilled in adjusting and aligning sensors, transmitters, amplifiers, power supplies, display devices, controls, actuators, servos, computers and other related components. Have technical expertise in removing faulty LRUs for shop repair. Skilled and knowledgeable in the installation of serviceable components into the aircraft and in performing total systems alignments, in accordance with existing technical manuals and directives. Accomplished in following technical manual compliance and modification of components and systems; and, and skilled in completing systems checks for proper operations. Skilled in maintaining, modifying, calibrating and inspecting a wide variety of user tests, measurements, and diagnostic equipment (TMDE). Skilled in completing bench checks, testing, repairs, inspections, modifications, programming, reprogramming, mating, adjusting, alignments, and analyzing of LRUs and shop replaceable units. Experienced in using a variety of test equipment such as, automatic test equipment (ATE), oscilloscopes, DTA computer, multi-meters, power-meters, and special purpose bench test sets. Competent to test and troubleshoot solid state electronic assemblies and subassemblies such as, circuit cards, modules, rate gyros, electronic control amplifiers, electro-mechanical assemblies, random access memories, programmable read-only memories and various integrated circuits. Capable to certify the operational integrity of various night vision systems, and electro-optical components. Skilled in recognizing methods to improve equipment performance, technical data, and maintenance procedures by reporting hardware and software malfunctions, initiates material deficiency reports both on equipment and in technical data. Experienced in debriefing aircrews to determine the nature of system malfunctions, then documents all maintenance performed and records information related to the system, LRU's, or shop repairable units on both aircraft and historical records. Should have experiences as a flight crew member for the purpose of diagnosing and recording malfunctions, or otherwise determining maintenance and repair requirements. Experienced in providing instructional training to other mechanics in regard to the repair of computer controlled automatic test equipment, line replaceable units and aircraft integrated systems. Experiences included participation in various types of readiness evaluations such as, Operational Readiness Evaluations (ORE), Command Logistics Readiness Inspections (CLRT-X), and Aviation Resource Management Surveys. May have experiences in performing additional duties such as, structural firefighting, aircraft handling, heavy equipment operation, and maintenance of facilities and equipment, or served as a member of a team to cope with natural disasters or civil emergencies. Knowledgeable in safety, fire, security, and housekeeping regulations. EXPERIENCE REQUIREMENTS: Resume must have complete dates and hours worked per week for each occurrence of both civilian and military employment (Example: 2 JAN 1980 to 3 MAR 1981; 0800-1630 M-F or JAN 1980 to MAR 1981; 40 hrs/wk) Use of year only will result in disqualification. The duties listed must fully substantiate -in your own words- that you meet the minimum requirements and specialized experience listed above, in detail; otherwise, you will not be considered qualified for this position. Length of time is not of itself qualifying. Your experience will be evaluated on the basis of duties performed. Your record of experience and/or training must show possession of the following knowledge, skills and abilities needed to fully perform the duties of the position: -Ability to apply electronic theories and practices to identify, isolate and repair malfunctions in one or more complex integrated systems where knowledge of the entire system is necessary to interpret error data and trace back through a number of units of the system to locate deficiencies. -Thorough knowledge of the principles of digital and analog circuits, electro-mechanical devices, solid state devices theory, digital techniques, synchro/servo operation and integrated circuit theory. -Ability to interpret and trace schematic, logic and wiring diagrams and use a wide variety of test, measurement, and diagnostic equipment (TMDE). Ability to perform algebraic and trigonometric formulas to solve work-related problems. -Current certification in high reliability soldering techniques, as well as electrostatic discharge protective techniques. -Knowledge of the Army Maintenance Management System (TAMMS) and other automated programs, publications or directives as may be applicable to the function.

Contacts

• Address Alaska Army National Guard P.O Box 5800 JBER, AK 99505 US
• Name: Lester Nathaniel Tuazon
• Phone: 907-428-6351
• Email: [email protected]