This position is part of the Warfare Centers Personnel Demonstration Project. The ND-5 pay band is equivalent to GS-14 and GS-15. You will serve as an Engineer, SSN(X) Product Support Lead, in the Naval Architecture & Engineering Department (80), Future Concepts & Design Integration Division (82), Submarine Design Integration Branch (Code 821) of the Naval Surface Warfare Center Carderock Division. This position will be detailed to the SSN(X) program, located at the Washington Navy Yard.

Duties

You will lead, manage, and coordinate Navy Next-Generation Attack Submarine (SSN[X]) construction and sustainment, and other technical efforts under the Program Executive Officer, Attack Submarines (PEO SSN) 4XX Program Office. You will serve as the PMS 4XX Task Manager for the Construction and Sustainment technical domain, which features SSN(X) tasking in the areas of Reliability, Availability, and Maintainability (RAM) Design for Sustainment, and Design for Affordability. You will interface with the Concept Design Team to provide considerations and practical constraints on submarine concepts based on practical construction and maintenance limitations of existing and/or potential future shore activity infrastructure. You will lead coordination with Technical Warrant Holders to identify primary maintenance and construction delay drivers on active submarine classes and recommend improvements to the Ship Design Manager and Research and Development Manager. You will lead engagements with partners across the Naval enterprise, as well as public, private and academic Research and Development organizations or construction and sustainment-related infrastructure and logistics support planning.

Requirements

• Must be a US Citizen.
• Must be determined suitable for federal employment.
• Must participate in the direct deposit pay program.
• New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov
• Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.
• Males born after 12-31-59 must be registered for Selective Service.
• You will be required to obtain and maintain an interim and/or final Secret security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.
• This position is covered under the Defense Acquisition Workforce Improvement Act (DAWIA). Certification in the Acquisition Functional Area and category assigned to the position is required within established category timeframes.
• This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.
• You will be required to complete ethics orientation within three months of appointment and submit a Confidential Financial Disclosure Report, OGE-450, within 30 days of appointment.

Qualifications

This is an interdisciplinary position and may be filled by a General Engineer (0801-series), a Mechanical Engineer (0830-series), or a Naval Architect (0871-series) depending upon the qualifications of the candidate. Applicants in positions with occupational series other than those listed (0801, 0830 and 0871) may apply; however, you must apply directly to the series listed in this vacancy that is most applicable to your qualifications. Your resume must demonstrate at least one year of specialized experience at or equivalent to the ND-4 pay band (GS-12 and GS-13 equivalency) in the Federal service or equivalent experience in the private or public sector. Specialized experience must demonstrate the following: As a professional engineer applying a wide range of naval architecture principles to provide leadership in the design of ships or submarines. Examples of qualifying experience may include (1) significant experience in US naval submarine design (Concept Design and Acquisition Design); (2) leading or participating in design teams; (3) expert knowledge of public and private infrastructure for submarine construction; (4) knowledge of Submarine Reliability, Availability, and Maintainability (RAM). Additional qualification information can be found from the following Office of Personnel Management websites: https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/#url=List-by-Occupational-Series AND https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/0800/files/all-professional-engineering-positions-0800.pdf Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment.

Education

Applicants must meet the following basic education requirements of the Office of Personnel Management (OPM) Qualifications Standards Manual:

Successful completion of a professional engineering degree. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. Such education must demonstrate the knowledge, skills, and abilities necessary to do the work of the position.

OR

Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration For more information about EI and EIT registration requirements, please visit the National Society of Professional Engineers website at: http://www.nspe.org

OR

Evidence of having successfully passed the Fundamentals of Engineering (FE) examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico The FE examination is not administered by the U. S. Office of Personnel Management. For more information, please visit: http://www.nspe.org/Licensure/HowtoGetLicensed/index.html.

OR

Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and in engineering that included the courses specified in the basic requirements under paragraph A (above). The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A (above)

OR

Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least one year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily, there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions.

Contacts

• Address CARDEROCK DIV NS 9500 Macarthur Blvd West Bethesda, MD 20817-5700 US
• Name: Department of Navy EIC
• Email: [email protected]