Job opening: AIRCRAFT ENGINE MECHANIC
Salary: $30 - 35 per hour
Published at: Aug 29 2023
Employment Type: Full-time
THIS IS A NATIONAL GUARD TITLE 32 EXCEPTED SERVICE POSITION.
NEW MEXICO AIR NATIONAL GUARD
**You must be a member of the New Mexico Air National Guard to be eligible for this position.
This National Guard position is for a AIRCRAFT ENGINE MECHANIC, Position Description Number D1636000 and is part of the NM 150th SOW Maintenance Group, National Guard.
Duties
(1) Removes, installs, certifies, repairs, modifies, overhauls, and installs turboprop engines, reduction gear boxes, turbine modules, compressor modules, auxiliary power units, propellers and related propeller components as required. Performs maintenance on all propulsion systems including troubleshooting and diagnosing defects, certifying, conducting bench checks, performing in-shop and on-equipment repairs and overhauls. Diagnoses malfunctions using computerized test equipment, schematic diagrams, technical publications and performs the appropriate repair according to the test results and analysis. Determines the extent of disassembly necessary to repair, overhaul, replace and certify all engine, propeller and auxiliary power unit parts. Cleans and inspects engine and propeller component parts such as turbines, gearboxes, blades, gears, bearings, etc. Assembles engines, propellers and auxiliary power units, adhering to prescribed procedures, torque values, safety methods and clearances. Troubleshoots propellers using electric and hydraulic test stands to check for proper operation and evidence of oil leakage. Operationally checks engines and propeller assemblies and auxiliary power units, by using the engine test cell facility to meet all full power run checks on the engine and propeller assemblies and auxiliary power units.
(2) Modifies engines, propellers, auxiliary power units, and components in accordance with Time Compliance Technical Orders (TCTO) directives; removes and installs engine quick change kits; prepares engines for installation and installs engine and propeller assemblies on aircraft. Evaluates technical problems of repair, overhaul, modification and installation of aircraft propulsion systems. Solves all types of maintenance problems and performs bench checks and test engine and propeller assemblies for serviceability.
(3) Performs operational checks of installed propellers, engines, auxiliary power units and sub-systems during aircraft maintenance ground runs in accordance with approved checklists. Employs test equipment such as computer borescope, fuel pressure gauges, air pressure gauges, and alignment fixtures. Utilizes special tools and precision measuring equipment, high-pressure hydraulic test equipment, and electronic test equipment.
(4) Performs isochronal and special evaluations on engines, propellers and auxiliary power units. Interprets certification findings and determines adequacy of corrective action. Certifies installed and repaired engines for compliance with technical publications. Performs fixed and mobile test stand functions (which may include maintenance of engine test cell facility); installs special test equipment; performs pre-operational and post operational checks. Operates engines and propellers and records test data. Operates, certifies, and maintains computerized engine test/trim automated systems (ETTAS) on the engine test cell. Evaluates, identifies and corrects problems on propeller and engine components causing vibration or impending failure using the ETTAS system, and vibration analyzer. Evaluates engine and propeller performance by computing engine torque and specific fuel consumption. Monitors engine RPM and turbine inlet temperatures. Evaluates engine and propeller performance and accepts or rejects the individual components. Removes engine and propeller from test stand and prepares units for aircraft installation or storage. Accomplishes operator maintenance on the aircraft and engine sound suppresser facility, test stands and various pieces of ground equipment, including the auxiliary power unit test cell. Performs dynamic propeller balancing and tests the propeller integrated synchophasing. Tests variable potentiometers, servo-motors, indicators and aircraft wiring.
(5) Performs aircraft full power runs and complete engine and propeller efficiency checks. Clears Red X symbol documentation on engine and propeller related components.
(6) Prepares man-hour data collection and required forms for input into the Core Automated Maintenance System (CAMS) or the G081 (AFI 22-2101, CAMS for Mobility). Reviews and assists in maintaining Technical Orders (TOs) and other technical publications and directives pertinent to the element.
(7) Maintains bench stock, parts, and equipment. Assists the material control function in identifying part numbers and stock numbers for processing and controlling of repair cycle assets.
(8) Performs other duties as assigned
Requirements
- NATIONAL GUARD MEMBERSHIP IS REQUIRED.
- This is an excepted service position that requires membership in a compatible military assignment in the employing state's National Guard, required prior to the effective date of placement.
- Selectee will be required to wear the military uniform.
- Acceptance of an excepted service position constitutes concurrence with these requirements as a condition of employment.
- Males born after 31 December 1959 must be registered for Selective Service.
- Federal employment suitability as determined by a background investigation.
- May be required to successfully complete a probationary period.
- Participation in direct deposit is mandatory.
Qualifications
Military Grades: Enlisted (E-5 and below)
Compatible Military Assignments: AFSC: 2A6X1H
GENERAL EXPERIENCE: Experience or training that has provided the ability to perform assembly and disassembly operations and make prescribed modifications to aircraft engines, engine assemblies, and accessories in accordance with technical specifications, procedures and requirements. Experience using hand and power tools common to the trade.
SPECIALIZED EXPERIENCE: WG-10- Must have experience or training performing standard, routine assembly and disassembly operations and making prescribed modifications to aircraft engines, engine assemblies, and accessories. Experience or training performing maintenance overhaul, troubleshooting, testing, and repair of aircraft engines, engine components, and power trains for fixed and/or rotary wing aircraft. Experience determining maintenance needed from work orders, inspection reports, historical record, and by own diagnosis.
Contacts
- Address NM 150th SOW Maintenance Group
Kirtland AFB
Albuquerque, NM 87117-5875
US
- Name: Jonelle Suina
- Phone: 505-407-3610
- Email: [email protected]
Map