This National Guard position is for a ELECTRONIC INTERGRATED SYSTEMS MECHANIC (Title 32), Position Description Number D2240P01 and is part of the 151 MXS located in SLC UT, with the Utah Air National Guard. This vacancy is RESTRICTED to current military members of the Utah Air National Guard. The selecting supervisor for this vacancy is SMSgt Robert Peterson.

Duties

Major Duties: This is not an all-inclusive list As a ELECTRONIC INTERGRATED SYSTEMS MECHANIC (Title 32), WG-2610-12/13, you will:

Requirements

Qualifications

*Your resume must reflect in detail how the duties and responsibilities under each position you have held with each employer meets the below listed general and specialized experience required for the position. **Must include beginning and ending dates of employment stated as MM/YYYY; and total hours worked per week in order to determine part time vs. full time credit. Specialized Experience WG 12: Have at least 1 year of as a WG-2610-11? *Must submit SF50* OR have 18 months experience in the following? Experiences involved installing, modifying, overhauling, maintaining, troubleshooting, repairing, aligning, calibrating, and rebuilding multi-system avionics complexes consisting of multiple completely integrated electronic avionics systems where the complex accomplishes a number of major functions. Skilled in performing on-or-off equipment maintenance on one or more complete electronic integrated systems associated with the assigned aircraft and/or maintenance on automatic flight control systems, instrument systems, inertial or radar navigation systems. Experiences included performing scheduled and unscheduled maintenance on one or more multi-complex electronic integrated systems. Skilled in conducting operational checks, inspections, tests, trouble shooting, removal and replacement of line replaceable units. Skilled in adjusting and aligning system sensors, transmitters, amplifiers, power supplies, display devices, controls, transponders, actuators, servos, computers and other related components. Experienced in maintaining, modifying, calibrating and inspecting a wide variety of user tests, measurements, and diagnostic equipment. Skilled craft for installing, modifying, overhauling, maintaining, troubleshooting, repairing, rebuilding, aligning, and calibrating complete electronic avionics multi-systems controls. Skilled in operating integrated flight and integrated counter-measures system, electronic multiplex communications bus, inertial navigation system, multi-function displays, heads- up display, data transfer equipment, global positioning system, situation awareness data-link, data modem, flight control system, pitot-static system and related instrumentation. Must have experiences in working with the flight director instrumentation, central air data computer, engine, hydraulic and fuel quantity indicating systems, voice message warning, very high frequency ultra-high frequency, satellite communications data, intercom, secure voice communications, and identification friend or foe tactical air navigation system. Experiences included work that evaluated operational characteristics of the integrated systems by observing and analyzing waveforms, voltage, current, power indications, computer registers and printouts. Skilled in analyzing the malfunctions encountered through fault codes, determines repair sequence process and performs the repairs. Experienced in the review and analyzation of maintenance data. Knowledgeable in determining if criteria are sufficient to provide adequate test, troubleshooting and repair procedures. Capable to align, adjust, and perform final calibrations on integrated systems to determine successful repairs. Experiences included monitoring the operations of complex, inter-related systems, and analyzed operating trends, proposed preventative maintenance down time that assured continued operating capability, and recommended components for overhaul or engineering evaluation for disposal. Competent in conducting prototype assembly, operations, and repairs; or, experienced in using experimental electronic systems such as, inertial navigation and automatic flight controls. Experiences included advising aerospace engineering personnel on the operation and maintenance effects of proposed time compliance technical order modifications on new or existing equipment. Skilled in troubleshooting operational malfunctions and analyzing system performance utilizing aircrew debrief data, technical orders, schematic and wiring diagrams, engineering drawings, data analysis, common and system-specific test equipment, and built-in system tests. Experiences included the coordination of back-shop bench checks; completed testing, repair, inspection, modification, programming, reprogramming, mating, adjusting, alignment, and analyzing of shop replaceable units. Skilled in the use of test equipment such as, automatic test equipment, oscilloscopes, frequency counters, phase-angle voltmeters, optical alignment equipment, digital pilot-static testers, programming units and special purpose test analyzers. Skilled in the compliance requirements concerning safety, fire, security, and housekeeping regulations. Experienced in the procedures involved with the proper storage, protection, and maintenance of all work-related material and equipment. Specialized Experience WG13: Have at least 1 year of as a WG-2610-12? *Must submit SF50* Or 18 months experience in the following: Craftsman level of knowledge and skills to install, modify, overhaul, maintain, troubleshoot, repair, align, calibrate, and rebuild multi-system avionics complexes consisting of multiple completely integrated electronic avionics systems where the complex accomplishes a number of major functions. Ability and skills to perform on-or off-equipment maintenance on one or more complete electronic integrated systems associated with the assigned aircraft and/or maintenance on systems such as, automatic flight control systems, instrument systems, inertial and radar navigation systems. Experienced in performing scheduled and unscheduled maintenance on one or more multi-complex electronic integrated systems. Experiences included completing operational checks, inspections, tests, trouble shooting, removal and replacement of line-replaceable-units which are linked with integrated systems and line-replaceable-units which are independent or associated with nonintegrated systems. Must have skilled capabilities of isolating unusual malfunctions using technical orders, schematics, wiring diagrams, tools, and test equipment including automatic test equipment and flight line test systems. Skilled in solving complex problems by analyzing installation, circuitry, and operating characteristics of the systems. Skilled in maintaining, modifying, calibrating, and inspecting a wide variety of user test, measurement, and diagnostic equipment. Experienced in performing installations, modifications, overhauling, maintaining, troubleshooting, repairing, rebuilding, aligning, and calibrating complete electronic avionics multi-system controls. Must have a thorough working knowledge of complex aircraft avionics or electronic circuit maintenance systems such as, the electronics package in highly automated aircraft where the integrated flight and integrated countermeasures system, electronic multiplex communications bus, inertial navigation system, multi-function displays, head-up display, data transfer equipment, global positioning system, situation awareness data-link, data modem, flight control system, pivot-static system and related instrumentation, flight director instrumentation, central air data computer, engine, hydraulic and fuel quantity indicating systems, voice message warning, various modes of data, intercom, secure voice communications, identification friend or foe, and tactical air navigation system. Skilled in performing alignments, adjustments, and conducting final calibrations on integrated systems to determine successful repairs. Skilled in the applications of technical data and equipment specifications that determine the impact equipment modifications or substitutions on integrated multi-system operations and various maintenance alignment procedures. Competent in using algebraic and trigonometric functions to adapt standard formulas to the specific requirements of the integrated system.

Education

ANG ENLISTED: To qualify an enlisted applicant for hire consideration into an ANG Dual Status Technician FWS 2610 position, award of the compatible PAFSC, Craftsman Seven Skill Level; Journeyman Five Skill Level; or, the Apprentice Three Skill Level, with the position's compatible unit position assignment and a high school diploma, are mandatory requirements. Completion of high school courses in physics, algebra, trigonometry, and computer principles is desirable. Higher academic college courses and degrees that are aligned within the FWS Series 2610 type of work tasks are also desirable.

For the WG-2610-12 ANG Dual Status Technician positions, the mandatory military training requirements are the completion of compatable Avionics Air Force Three Skill Level Technical Training School; and, the successful On-the-Job training that will result, or resulted in, the award of a compatible Five Skill Level AFSC; or, qualified to hold a compatable aircraft maintenance/armament/munitions craftsman seven skill level PAFSC and successful formal training that will result, or resulted, in the award of a compatible Five Skill Level AFSC.

Contacts

• Address UT 151 Maintenance Squadron 765 N 2200 W Salt Lake City, UT 84116 US
• Name: Bambi Dalton
• Phone: 801-432-4241
• Email: [email protected]