THIS IS A NATIONAL GUARD TITLE 32 EXCEPTED SERVICE POSITION. This National Guard position is for a ELECTRONIC INTEGRATED SYSTEMS MECHANIC, Position Description Number D2240P01 and is part of the ID 124 AMXS, National Guard. THIS POSITION IS INDEFINITE-MAY CONVERT TO A PERMANENT STATUS WITHOUT FURTHER COMPETITION IF POSITION BECOMES AVAILABLE.

Duties

1. Performs scheduled and unscheduled maintenance on one or more multi-complex electronic integrated systems. Completes operational checks, inspections, tests, trouble shooting, removal and replacement of Line Replaceable Units (LRUs) which are linked with integrated systems and LRUs which are independent or associated with nonintegrated systems. Isolates unusual malfunctions using technical orders, schematics, wiring diagrams, tools, and test equipment including automatic test equipment and Flight Line Test Systems (FLTS). Solves complex problems by analyzing installation, circuitry, and operating characteristics of the systems. Accomplishes technical order compliances, modification of components/systems and completes thorough system checks for proper operation. Maintains, modifies, calibrates and inspects a wide variety of user test, measurement, and diagnostic equipment (TMDE). Installs, modifies, overhauls, maintains, troubleshoots, repairs, rebuilds, aligns, and calibrates complete electronic avionics multi-systems control. 2. Reviews and analyzes maintenance data; determines if criteria are sufficient to provide adequate test, troubleshooting and repair procedures; devises and recommends tests, procedural changes, or data corrections. Aligns, adjusts, and performs final calibrations on integrated systems to determine successful repairs. Analyzes equipment failure and malfunctions and suggests changes to improve operation. Monitors the operation of complex, interrelated systems, analyzes operating trends, proposes preventative maintenance down time to assure continued operating capability, and recommends components for overhaul or engineering evaluation for disposal. 3. Troubleshoots operational malfunctions and analyzes system performance utilizing aircrew debrief data, Technical Orders, schematic and wiring diagrams, engineering drawings, data analysis, common and system-specific test equipment and built in system tests. Performs on and off-equipment maintenance on systems such as automatic flight control, instruments, communication, navigation, and inertial navigation. Coordinates back shop bench check (if applicable, completes testing, repair, inspection, modification, programming, reprogramming, mating, adjusting, alignment, and analyzing of LRUs and shop replaceable units (SRUs). Uses a variety of test equipment such as automatic test equipment (ATE), oscilloscopes, frequency counters, phase-angle voltmeters, optical alignment equipment, digital pitot-static testers, programming units and special purpose test analyzers. Tests and troubleshoots solid state electronic assemblies and subassemblies such as circuit cards, modules, rate generators, electronic control amplifiers, electro-mechanical assemblies, random access memories, programmable read only memories, and various integrated circuits. 4. Recommends methods to improve equipment performance, technical data, and maintenance procedures by reporting hardware and software malfunctions, initiates material deficiency reports both on equipment and in technical data, and assists in design changes as necessary. Maintains Electronic Warfare (EW) (if applicable) and analysis equipment such as infrared/radar warning equipment, infrared/radar jamming equipment, chaff/flare dispensing systems, signal analysis equipment, recorders, direction finders, and special purpose test equipment. Accomplishes organizational and intermediate level modifications. Configures complex aircraft ECM equipment (if applicable) to meet critical mission requirements. Performs intricate component alignment and calibration to ensure proper system operation. Performs flight operational test, adjusts or replaces units or components as required. Conducts aircrew debriefings to analyze maintenance problems and determines the nature of required modifications. 5. May upload and download chaff/flare dispensers. This hazardous task may involve the inspection, storage and handling of explosive devices; to include flares, chaff, impulse cartridges and similar items. Conducts on-the-job training on assigned systems and related support equipment and tasks to include classroom instruction as necessary. Processes and accounts for due-in from maintenance (DIFM) supply assets. Ensures that material and equipment are properly stored, protected and maintained and that funds are not obligated for material or parts without proper justification. 6. May be required to perform additional duties such as structural firefighting, aircraft fire/crash/rescue duty, serve as a security guard, remove snow, load and handle munitions, launch/recover and service aircraft, operate heavy equipment, maintain facilities and equipment, or serve as a member of a team to cope with natural disasters or civil emergencies. Performs other duties as assigned.

Requirements

• NATIONAL GUARD MEMBERSHIP IS REQUIRED. If you are not sure you are eligible for military membership, please contact a National Guard recruiter prior to applying for this position.
• This is an excepted service position that requires membership in a compatible military assignment in the employing state's National Guard, required prior to the effective date of placement.
• Selectee will be required to wear the military uniform.
• Acceptance of an excepted service position constitutes concurrence with these requirements as a condition of employment.
• Applicants who are not currently a member of the National Guard must be eligible for immediate membership and employment in the National Guard in the military grade listed in this announcement.
• Males born after 31 December 1959 must be registered for Selective Service.
• Federal employment suitability as determined by a background investigation.
• May be required to successfully complete a probationary period.
• Participation in direct deposit is mandatory.
• Must be able to obtain/maintain Secret Security Clearance.
• Must be able to obtain/maintain 2A354 or 2A374 AFSC.

Qualifications

Military Grades: E-1 through E-6. Compatible Military Assignments: Aircraft Mechanic. THE FOLLOWING QUALIFICATIONS MUST BE REPRESENTED BY THE CONTENTS OF YOUR RESUME. To ensure full credit is given for the qualification requirements listed below we suggest using the USA Jobs resume builder. IF YOU USE YOUR OWN RESUME PLEASE ENSURE THAT YOU INCLUDE THE BEGINNING AND ENDING DATES (MONTH AND YEAR) FOR ALL JOBS LISTED IN YOUR RESUME. Verbiage displayed on your resume or application must contain your own words. You may refer to position descriptions, i.e. the general and specialized experience located within the vacancy announcement, to assist with describing work experiences; however, resumes or applications received in verbatim will not be considered. In your resume you will need to address the general and specialized experience listed below. Please use as much detail as needed, giving dates (months and years) of the experience, position title and how the experience was gained. This information is needed to determine if you are qualified for the position. GENERAL EXPERIENCE: To qualify an applicant for one of the FWS Series 2610 ANG Dual Status Technician positions, apply and evaluate the applicant's competencies, military and civilian experiences, completed education, learned skills, obtained knowledge, endorsed abilities, and training program accomplishments. The following seven basic qualification factors are applicable to the FWS ANG Dual Status Technician positions: -Skilled in collecting and analyzing data effectively, efficiently, and accurately -Ability to communicate clearly and effectively -Skilled in duties such as, install, modify, overhaul, maintain, troubleshoot, repair, align, calibrate, and rebuild multi-system avionics complexes -Ability to format and write English in reports and presentation formats -Skilled in presenting formal training presentations and briefings -Skilled in applying procedures and directives by reading and interpreting material -Skilled in training, mentoring, leading, and problem-solving SPECIALIZED EXPERIENCE: For the WG-2610-12 ANG Dual Status Technician positions, the mandatory military training requirements are the completion of an Air Force Three Skill Level Technical Training School and successful On-the-Job training that will result or resulted in the award of a compatible Five Skill Level AFSC. For the WG-2610-13 ANG Dual Status Technician positions, the mandatory military education requirements are the completion of an Air Force Seven Skill Level Technical Training School and awarded a compatible Seven Skill Level AFSC, along with the successful completion of at least one military professional education course program. *Must have at least three years of specialized working experiences in performing, training and/or supervising assigned integrated systems repair and maintenance work operations. Must have working and training experiences in the maintenance, repair, and modification of integrated multi-complex avionics systems. Skilled in planning tasks for subordinate workers and expanded knowledge in using the equipment, facilities and materials. Skilled in meeting deadlines, in using time management to satisfy priorities and work assignments based on general work schedules, methods, and policies set by higher level supervisors.

Education

You must provide transcripts or other documentation to support your Educational claims. To receive credit for Education, you must provide documentation of proof that you meet the Education requirements for this position.

Contacts

• Address ID 124 AMXS 4794 Gen Manning Ave Boise, ID 83705 US
• Name: Benjamin O'Neal
• Email: [email protected]