This National Guard position is for a SHEET METAL MECHANIC (AIRCRAFT) TITLE 32, Position Description Number D1371000 and is part of the Oregon Air National Guard 142d Wing, National Guard.

Duties

As a SHEET METAL MECHANIC (AIRCRAFT) TITLE 32, WG-3806-10, this position is located within a National Guard aircraft maintenance organization. Its primary purpose is to accomplish the inspection, repair, modification, installation and troubleshooting of sheet metal, fiberglass, bonded honeycomb and other structural materials and components as well as treatment (i.e., mechanical and chemical), and painting of missiles, aircraft powered and non-powered Aerospace Ground Equipment (AGE), and monitoring aircraft and equipment washing. (1) Independently inspects aircraft and determines the nature and extent of repairs to be made, using applicable technical orders as guidelines. Works directly on the aircraft and its components, fulfilling such tasks as removal, repair, modification and installation of parts and assemblies, such as frames, stringers, longerons, bulkheads, beams, ribs, spars, skin, cowling, brackets, faring, access doors, panels and other related items. May be required to clear red "X" conditions. (2) Repairs cracks in aircraft skin. Fabricates and fits patches to damaged areas, determining repair detail necessary to retain or restore original strength. Fits and trims components to aircraft such as landing gear doors, control surfaces, flaps access doors and other assemblies. Seals structures to make them pressure, water and weather tight. (3) Troubleshoots aircraft structural repair situations in such areas as fuselage, tails, wings, cowlings, and stabilizers. Removes, forms, fits, and installs highly stressed and double contoured skins, using hand or powered drilling and cutting tools and other metal working equipment. Determines shear and bearing load factors during rivet replacement. Installs heads up, regular, heat treated, high shear, and blind type aircraft rivets and fasteners, using pneumatic riveters, special tools and bucking bars. Removes damaged or broken fasteners and receptacles. (4) Aligns and balances component structures and airframe using precision measuring instruments and levels. Performs metal to metal bonding where delimitation of surfaces and core material occurs in control surfaces. (5) Inspects damage or deterioration and determines repair or replacement of plastic, fiberglass, composites, bonded structures, and bonded honeycomb assemblies using powered and non-powered tools and equipment. Repairs or replaces retaining frames and installs plastic laminated blanks. Designs and constructs forming fixtures. (6) Manufactures and ensures that metal tubing, conduits and cables are fabricated and tested in accordance with drawings and specifications. Fabricates and repairs flexible control cables. (7) Performs fabrication of local manufactured items requited for aircraft and equipment. Work includes layout, bending, cutting, forming and assembling. Devise and calculates patterns employing the principles of triangulation, radial and parallel line development. (8) Sets up and operates power shears, brakes, rolls, dimpling machines, drill presses, saws, portable powered tools, specific detection and measuring equipment, and other metal working equipment, including use of other tools of the trade. Requisitions necessary supplies and equipment for the activity. (9) Prepares and designs layout, dies, jigs, and templates necessary to carry out fabrication repair or modification of aircraft, engine, AGE, and other equipment. Works from blueprints, technical orders diagrams, and work orders. (10) Identifies metal corrosion. Performs necessary testing to identify type corrosion present by examination with magnifying equipment, chemical and mechanical methods and treats aircraft engines, in accordance with applicable technical publications. Ensures that work assignments received from supervisor or maintenance control are accomplished in a timely manner. (11) Removes corrosion by mechanical and chemical procedures to include use of portable powered (electric and pneumatic) sanders, buffers, brushes, bead blasters, vacuum cleaners, scrapers, grinders, acids, caustics, solvents, alcohols and other agents used in corrosion control processes. Treats metal with chemical procedures, such as acids and caustics for passivation and etching, to protect metal from oxidation. Performs such functions as pickling of metals to prepare for good bonding with primer coat of protective materials. (12) Applies protective coatings, markings, and decals after proper removal of corrosion and treatment of metals. Uses conventional paint spray equipment, electrostatic spray equipment, brushes and special applicators when applying primers and surface coatings. (13) Performs other duties as assigned.

Requirements

• National Guard Membership is required.
• Males born after 31 December 1959 must be registered for Selective Service.
• Participation in direct deposit is mandatory.
• U.S. citizenship is required.
• This position is covered by the Domestic Violence Misdemeanor Amendment (30 Sep 96) of the Gun Control Act (Lautenberg Amendment) of 1968. An individual convicted of a qualifying crime of domestic violence may not perform the duties of this position.
• The duties of this job may significantly impact the environment. You are responsible to maintain awareness of your environmental responsibilities as dictated by legal and regulatory requirements, your organization, and its changing mission.
• Must be able to establish effective professional working relationships with coworkers and customers, contributing to a cooperative working environment and successful accomplishment of the mission.
• May occasionally be required to work other than normal duty hours; shift work and/or overtime may be required.
• Federal employment suitability required and determined by a background investigation before appointment to position.
• May be required to successfully complete a probationary period.
• Must have a valid driver's license.
• Must be able to obtain/maintain the necessary security clearance for the position.
• Compatible Military AFSC Assignments: 2A7X3
• Military Grades: Enlisted members, minimum SrA/E-4 and maximum SSgt/E-5. Applicants outside of the ORANG must submit documents showing current (or previously held) military grade such as a Data Brief, vMPF rip, and/or DD214.

Qualifications

Areas of Consideration: Area 1 - Current permanent and indefinite T32 technicians of the Oregon ANG. Area 2 - Current permanent and indefinite T5 employees of the Oregon ANG. Area 3 - Current service members in the Oregon ANG. Area 4 - Individuals in the active duty US Air Force, Air Force Reserve, or Air National Guard. Area 5 - US Citizens eligible to meet the military requirements for membership in the Oregon ANG. GENERAL and SPECIALIZED EXPERIENCE QUALIFICATION REQUIREMENTS: Work involves the fabrication, modification, repair, assembly, and installation of sheet metal parts, items, and assemblies. Metals include but are not restricted to galvanized and black iron, aluminum and aluminum alloys, stainless steel, copper, and brass sheets, lead alloys and bronze. Experience or training that has provided the candidate with the ability to plan, manufacture, and install cylindrical, square, or rectangular-shaped objects that have easily constructed fastenings such as single and double-hem edges and single, double or grooved seams. Must have at least 18 months of experience or training in planning, layout, and construction skills to manufacture items and systems with dovetailed seams, set-in-bottom seams, burred-bottom seams, or wired or lock seams. Experience using more complicated shop tools and equipment. Experience in using metals including stainless steel, copper sheet, magnesium, honeycomb material and alloys. Experience demonstrating the use of more complicated mathematical calculations and complicated measuring instruments.

Education

This job does not have an education qualification requirement.

Contacts

• Address Oregon Air National Guard 142d Wing 6801 NE Cornfoot Rd Portland, OR 97218 US
• Name: Angela Lewis
• Phone: 971-355-3304
• Email: [email protected]