This vacancy is for a Civil Engineer in the Economic Development Administration within the Department of Commerce.

Duties

This position requires Civil Engineers with a wide range of engineering and project management responsibilities. The incumbent will play a major role on a multi- disciplined team making recommendations to the Area Director regarding technical project feasibility and merits, and regarding all aspects of the construction of multi-million-dollar projects, including management of development and implementation of strategies that anticipate customer needs, and the execution of vital change initiatives. As a Civil Engineer, you will perform the following duties: Be responsible for construction project management; ensure conformance with acceptable engineering standards and all statuary and regulatory requirements; Recommend appropriate action, to include changes to the EDA project scope of work; arrange for and participate in pre-construction conferences with representatives of the recipient and the construction contractors, outlining the duties of each during the construction and warranty period and explaining EDA policies and requirements to be followed in the implementation of projects; Review recipients' final construction plans and cost estimates and other related documents for compliance with EDA policies and procedures; approve project scope according to applicable local, state, and federal codes and statutes; Monitor recipients' compliance with all applicable procedures and requirements which are prerequisite to solicitation of bids including, but not limited to, the requirements of Section 106 of PL 89-136, the Relocation Assistance Act, Flood Insurance Act, Clean Air Act, Davis-Bacon and related Acts, Civil Rights Act of 1964, Executive Order PL 90-480 concerning design of buildings for handicapped persons and all pertinent sections of the latest edition of EDA's Summary of Standards. This Job Opportunity Announcement may be used to fill other Civil Engineer GS-0810-9/11/12/13 FPL: 13 positions within the Economic Development Administration in the same geographical location with the same qualifications and specialized experience.

Requirements

Qualifications

Qualification requirements in the vacancy announcements are based on the U.S. Office of Personnel Management (OPM) Qualification Standards Handbook, which contains federal qualification standards. This handbook is available on the Office of Personnel Management's website located at: https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/ Applicants must possess one year of specialized experience equivalent in difficulty and responsibility to the next lower grade level in the Federal Service. Specialized experience is experience that has equipped the applicant with the particular competencies/knowledge, skills and abilities to successfully perform the duties of the position. This experience need not have been in the federal government. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations e.g., professional; philanthropic, religious; spiritual; community, student, social). Volunteer work helps build critical competencies; knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience. To qualify at the GS-9 level:SPECIALIZED EXPERIENCE: You must possess one full year (52 weeks) of specialized experience equivalent to the GS-07 in the Federal service. Specialized experience is defined as experience: Assisting in the design and construction of civil works projects or systems using established criteria or specifications. -OR- Education: One full year of graduate level education in a field which demonstrates the knowledge, skills, and abilities necessary to do the work of the position, such as: engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering. -OR- Superior Academic Achievement: Successful completion of all the requirements for a bachelor's degree with Superior Academic Achievement. In order to be creditable under this provision, Superior Academic Achievement must have been gained in a curriculum that is qualifying for the position to be filled, such as that identified in Education above Superior Academic Achievement is based on: Class Standing - Applicants must be in the upper third of the graduating class in the college, university, or major subdivision, such as the College of Liberal Arts or the School of Business Administration, based on completed courses; OR Grade-Point Average (G.P.A.) - Applicants must have a grade-point average of either (a) 3.0 or higher out of a possible 4.0 ("B" or better) as recorded on your official transcript, or as computed based on 4 years of education, or as computed based on courses completed during the final 2 years of the curriculum; or (b) 3.5 or higher out of a possible 4.0 ("B+" or better) based on the average of the required courses completed in the major field or the required courses in the major field completed during the final 2 years of the curriculum.; (3) Honor Society Membership - Applicants may be considered eligible based on membership in one of the approved national scholastic honor societies listed by the Association of College Honor Societies (https://www.achsnatl.org/). -OR- Combination of Education and Experience: A combination of education and experience may be used to qualify. To qualify at the GS-11 level: SPECIALIZED EXPERIENCE: You must possess one full year (52 weeks) of specialized experience equivalent to the GS-09 in the Federal service. Specialized experience is defined as experience: Assisting in the design and construction of civil works projects or systems using established criteria or specifications; and Assisting with the review of final construction plans, cost estimates and other related documents for compliance. -OR- Education: Ph.D. or equivalent doctoral degree or 3 full years of progressively higher level graduate education leading to such a degree in a field which demonstrates the knowledge, skills, and abilities necessary to do the work of the position, such as: engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering. -OR- Combination of Education and Experience: A combination of education and experience may be used to qualify . To qualify at the GS-12 level: SPECIALIZED EXPERIENCE: You must possess one full year (52 weeks) of specialized experience equivalent to the GS-11 in the Federal service. Specialized experience is defined as experience: Designing and constructing civil works projects or systems using established criteria or specifications; and Reviewing final construction plans, cost estimates and other related documents for compliance.

Education

Basic Requirement for Civil Engineer (0810 Series):A. Degree: Bachelor's degree (or higher degree) in engineering. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher degree) in a school of engineering with at least one program accredited by the accreditation Board for Engineering and Technology (ABET); OR (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. OR

B. Combination of Education and Experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:

1. Professional registration or licensure - Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.

2. Written Test - Evidence of having successfully passed the Fundamentals of Engineering (FE) examination, or any other written test required for professional registration, by an engineering licensure board in the various States, the District of Columbia, Guam, or Puerto Rico.

3. Specified academic courses - Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in A above. The courses must be fully acceptable toward meeting the requirements of an engineering program.

4. Related curriculum - Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering, provided that the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions.

In addition to meeting the basic requirement above, to qualify for this position you must also meet the qualification requirements listed above in qualifications:

Contacts

• Address Economic Development Administration 1401 Constitution Ave NW Washington, DC 20230 US
• Name: Kimberly Trimble
• Phone: 202-697-2874
• Email: [email protected]