Over 1 Million Paying Vacancies Available. Discover Your Dream Vacancy with Us!

Are you looking for a NAVSEA SAFETY, ENVIRONMENTAL, READINESS & RADIOLOGICAL CONTROLS? We suggest you consider a direct vacancy at Naval Sea Systems Command in Washington Navy Yard. The page displays the terms, salary level, and employer contacts Naval Sea Systems Command person

Job opening: NAVSEA SAFETY, ENVIRONMENTAL, READINESS & RADIOLOGICAL CONTROLS

Salary: $185 335 - 212 100 per year
Relocation: YES
Published at: Jul 17 2023
Employment Type: Full-time
You will lead the Naval Sea Systems Command (NAVSEA) Safety, Environmental, Readiness and Radiological Controls Group, driving a culture of continuous improvement and vigilance in these critical areas, across the entire NAVSEA enterprise. This position reports directly to the Executive Director for Safety and Regulatory Compliance. This position is critical for enhancing safety and regulatory compliance across the organization.

Duties

You will serve as a subject matter expert and senior leader responsible for assessing and improving these areas across the enterprise, including serving as the NAVSEA lead for governing policies, instructions and requirements. You will ensure that NAVSEA headquarters and field activities comply with all applicable occupational safety and health laws, regulations, permits, policies, instructions, and Executive Orders to ensure a safe and healthful workplace for employees. You will develop, manage, and provide oversight of policy and procedures for NAVSEA environmental programs across the command to ensure compliance with Navy, Department of Defense (DoD) and federal environmental policies and regulations. You will lead and manage the NAVSEA Maintenance and Modernization Programs. You will establish requirements for the procurement and safe use of material and machine sources of ionizing radiation. You will provide centralized life cycle support for all Navy radiation detection instruments and personnel dosimetry equipment used in the Navy and Marine Corps. You will develop, evaluate, and implement radiological controls for radioactivity associated with nuclear weapons and industrial uses of ionizing radiation to include emergency preparedness, exclusive of the Naval Nuclear Propulsion Program.

Requirements

  • Must be a US Citizen.
  • Must be determined suitable for federal employment.
  • Must participate in the direct deposit pay program.
  • New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov
  • You will be required to complete ethics orientation within three months of appointment and submit a Public Financial Disclosure Report, OGE-278e within 30 days of appointment.
  • Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.
  • Males born after 12-31-59 must be registered for Selective Service.
  • You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.
  • This position is covered under the Defense Acquisition Workforce Improvement Act (DAWIA). Certification in the Acquisition Functional Area and category assigned to the position is required within established category timeframes.
  • This position is a designated Critical Acquisition Position (CAP). You must sign a three-year tenure agreement prior to assuming the position unless a tenure waiver is approved.
  • Successful completion of a pre-employment drug test (including marijuana) is required. A tentative offer of employment will be rescinded if you fail to report to the drug test appointment or fail the test. You will be subject to random testing.
  • This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.

Qualifications

QUALIFICATIONS REQUIREMENTS: Applicants will be assessed against Mandatory Technical Qualifications (MTQs). Failure to provide a separate narrative statement which describes fully and concisely how your experience meets the Mandatory Technical Qualifications will eliminate you from consideration. MANDATORY TECHNICAL QUALIFICATIONS: (Each must be addressed separately in your Supplemental Narrative Statement. Each MTQ must not exceed 2 pages.) 1. Ability to assess and balance current and projected mission requirements and capabilities, and develop and negotiate complex risk based solutions to improve safety, environmental compliance, readiness and radiological controls across the NAVSEA enterprise. 2. Background, education and/or experience required to address, enforce, understand and communicate potentially complex safety and environmental issues. This includes knowledge of environmental engineering/science sufficient to oversee the whole range of environmental related systems and processes, and knowledge of occupational safety and health, in order to oversee, manage, set and enforce the required standards for occupational safety and health, and environmental programs; ---and/or (background in both strongly preferred)--- Background, education and/or experience in the principles of radiological health physics and nuclear engineering so as to oversee and manage the direction of radiological control matters related to Naval Nuclear weapons and industrial uses of ionizing radiation (including areas such as dosimetry, shielding, personnel protection practices, and applicable federal rules and regulations). 3. Demonstrated ability to provide programmatic leadership and oversight. 4. Knowledge of and experience in the application of technical risk management methodologies and processes. 5. Experience in presenting and defending controversial issues and requirements with program managers, and senior civilian and military leadership. Additional qualification information can be found from the following Office of Personnel Management website: https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/#url=GS-PROF and General Engineering Series 0801 (opm.gov) Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment.

Education

Applicants must meet the following Basic Requirements of the Office of Personnel Management (OPM) Qualifications Standards Manual:

For 0801 Professional Engineering Series:
A. Degree: Engineering. Successful completion of a bachelor's or higher engineering degree from an accredited college or university. To be acceptable, the program must: (1) lead to a bachelor's degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. Such education must demonstrate the knowledge, skills, and abilities necessary to do the work of the position.
-or-
B. Combination of education and experience -- college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:
(I) Professional registration or licensure -- Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions; or
(II) Written Test -- Evidence of having successfully passed the Fundamentals of Engineering (FE) examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico; or
(III) Specified academic courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A; or
(IV) Related curriculum -- Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all inclusive.)

Contacts

  • Address NAVSEA HQ FIELD SUPPORT 1333 Isaac Hull Avenue SE Washington, DC 20376 US
  • Name: Dept of the Navy Executive Hiring
  • Email: usn.seattle-wa.ochrsvdopscenwa.mbx.don-executive-hiring@us.navy.mil

Map

Similar vacancies

EXECUITIVE DIRECTOR, SURFACE SHIP MAINTENANCE & MODERNIZATION DIRECTORATE Mar 25 2024
$193 819 - 221 900

You will be responsible for the day-to-day programmatic, technical direction, and supervision of the design, sustainment, maintenance, CNO availability planning and execution, and modernization of ass...

DIRECTOR FOR MARINE ENGINEERING Dec 03 2024
$193 819 - 221 900

You will be responsible for the integration of Hull, Mechanical, and Electrical control systems, including cybersecurity, across surface ships, aircraft carriers, submarines, submersibles, and vehicle...

DISTINGUISHED ENGINEER NAVSEA WARFARE CENTERS CHIEF ENGINEER Jun 06 2024
$188 561 - 204 000

You will serve as the NSWC/NUWC technical expert in engineering and project management policy, technical processes, and technical performance metrics owner. ...

DISTINGUISHED ENGINEER NAVSEA WARFARE CENTERS CHIEF ENGINEER Nov 07 2024
$188 561 - 204 000

You will serve as the NSWC/NUWC technical expert in engineering and project management policy, technical processes, and technical performance metrics owner. ...

DIRECTOR OF PUBLIC WORKS Nov 13 2023
$185 335 - 212 100

You will report directly to the NAVFAC Executive Director and lead the PW Directorate across all echelons of the Command from PW Departments (PWD) at individual installations to HQ staff. ...