About the Position: This position is located in the U.S. Army Corps of Engineers Philadelphia District Office, Marine Design Center, Engineering Division, Machinery Branch, located in Philadelphia, Pennsylvania. This is a term position not to exceed 1 year. Term appointments may be extended up to a maximum of six (6) years.

Duties

You will serve as a senior Electrical Engineering specialist leading and performing all phases of electrical engineering in connection with design and construction of Corps of Engineers floating plant. Consults with construction contractor personnel to resolve problems of moderate to high complexity and latent conditions developing during construction. Leads and conducts field studies and investigations on board vessels and electrical shore power/off-vessel power installations. Responsible for all technical project coordination and development on projects of moderate size and/or scope. Prepares and reviews detailed cost estimates for use in obtaining project funding and bid evaluation. Reviews electrical portions of engineering designs prepared by architect-engineer firms.

Requirements

• Appointment may be subject to a suitability or fitness determination, as determined by a completed background investigation.
• You must possess or obtain and maintain a valid state Driver's License in one of the 50 U.S. states or possessions to operate vehicles
• Appointment to this position is subject to a one year probationary period unless the appointee has previously met the requirements as described in 5 CFR Part 315. While probationary the incumbent can be terminated with limited appeal rights.
• This position has a Temporary Duty (TDY) or business travel requirement of 33% of the time.

Qualifications

Who May Apply: Only applicants who meet one of the employment authority categories below are eligible to apply for this job. You will be asked to identify which category or categories you meet, and to provide documents which prove you meet the category or categories you selected. See Proof of Eligibility for an extensive list of document requirements for all employment authorities. Interagency Career Transition Assistance PlanPriority Placement Program, DoD Military Spouse Preference (MSP) Eligible In order to qualify, you must meet the education and experience requirements described below. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social). You will receive credit for all qualifying experience, including volunteer experience. Your resume must clearly describe your relevant experience; if qualifying based on education, your transcripts will be required as part of your application. Additional information about transcripts is in this document. Specialized Experience: One year of specialized experience equivalent to the GS-11 grade level in the Federal service which includes: 1) Applying engineering theory, principles, methods, and techniques related to electrical engineering design and construction; 2) Ensuring compliance of construction contracting procedures and contract administration; and 3) Communicating with agency contacts to plan, coordinate, or advise on work efforts, or to resolve issues or operating problems. You will be evaluated on the basis of your level of competency in the following areas: Electrical EngineeringOral CommunicationQuality Management Time in Grade Requirement: Applicants who have held a General Schedule (GS) position within the last 52 weeks must have 52 weeks of Federal service at the next lower grade or equivalent (GS-11).

Education

Basic Education Requirements for 0850 series:
A. Bachelor's degree (or higher degree) in engineering. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher degree) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); OR (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. (Note: You must attach a copy of your transcripts.)
B. Combination of education and experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. I am currently registered as an Engineer Intern (EI), Engineer in Training (EIT), or licensed as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions. (Note: You must attach a copy of your transcripts.)
C. Combination of education and experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. I have successfully passed the Fundamentals of Engineering (FE) examination, or any other written test required for professional registration, by an engineering licensure board in the various States, the District of Columbia, Guam, or Puerto Rico. (Note: You must attach a copy of your transcripts.)
D. Combination of education and experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. I have successfully completed at least 60 semester hours or 90 quarter hours of courses in the physical, mathematical, and engineering sciences that included the courses specified in A above. The courses must be fully acceptable toward meeting the requirements of an engineering program. (Note: You must attach a copy of your transcripts.)
E. Combination of education and experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. I have successfully completed a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, and have at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all-inclusive.) (Note: You must attach a copy of your transcripts.)


FOREIGN EDUCATION: If you are using education completed in foreign colleges or universities to meet the qualification requirements, you must show the education credentials have been evaluated by a private organization that specializes in interpretation of foreign education programs and such education has been deemed equivalent to that gained in an accredited U.S. education program; or full credit has been given for the courses at a U.S. accredited college or university. For further information, visit: https://sites.ed.gov/international/recognition-of-foreign-qualifications/.

Contacts

• Address RD-W428AA US ARMY ENGINEERS MARINE DESIGN CENTER DO NOT MAIL Philadelphia, PA 19103 US
• Name: Army Applicant Help Desk