This position is located with the USDA, Agricultural Research Service, National Center for Agricultural Utilization Research, Renewable Product Technology Research Unit in Peoria, IL. The incumbent is responsible for planning and conducting research to develop new catalytic routes for producing novel monomers from carboxylic acids produced by the fermentation of biomass. **ANNOUNCEMENT IS OPEN UNTIL FILLED OR December 16, 2025**

Duties

Develop catalytic materials and processes for converting oxygenates produced by the fermentation of agriculturally derived feedstocks into new monomers with potential uses in polyesters, polyamides, etc. Synthesize catalysts using standard methods (e.g. impregnation, sol-gel, precipitation). Test materials in lab-scale reactors for a variety of chemical transformations in either the vapor or condensed phase. Evaluate reaction rates, selectivities, and catalyst stabilities using techniques such as GC, GC-MS, and HPLC. Analyze, interpret, and report research results in the form of presentations, publications, patents, and technical reports.

Requirements

• Males born after 12/31/1959 must be Selective Service registered or exempt.
• Subject to satisfactory adjudication of background investigation and/or fingerprint check.
• Direct Deposit: Per Public Law 104-134 all Federal employees are required to have federal payments made by direct deposit to their financial institution.
• Successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit E-Verify at https://www.e-verify.gov/.
• Appropriations Law and Immigration Law requirements must be met.

Qualifications

This position requires a recent Ph.D. in chemical engineering, chemistry, or a related field with a focus on heterogeneous catalysis that has equipped the applicant with the necessary knowledge, skills, and abilities to perform the duties and responsibilities of the position. Knowledge relating to the synthesis, characterization, and testing of catalytic materials is needed. Experience with air free Schlenk techniques and/or synthesis of microporous materials is highly desirable. Applicants must meet basic Office of Personnel Management (OPM) Qualification Standard's requirements (noted below) of at least one of the scientific disciplines necessary to perform the duties and responsibilities of the position. Chemical Engineering (0893) Series: A. Degree: Engineering. To be acceptable, the program must: (1) lead to a bachelor's degree in a school of engineering with at least one program accredited by ABET (http://www.abet.org/); or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. OR B. Combination of education and experience: college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following: Professional registration or licensure -- Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions. Written Test -- Evidence of having successfully passed the Fundamentals of Engineering (FE) examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico. Specified academic courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A. Related curriculum -- Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all-inclusive.) For more information about EI and EIT registration requirements, please visit the National Society of Professional Engineers website at: http://www.nspe.org.The FE examination is not administered by the U. S. Office of Personnel Management. For more information, please visit: http://www.nspe.org/Licensure/HowtoGetLicensed/index.html. Chemistry Series (1320): A. Degree: physical sciences, life sciences, or engineering that included 30 semester hours in chemistry, supplemented by course work in mathematics through differential and integral calculus, and at least 6 semester hours of physics. OR B. Combination of education and experience -- course work equivalent to a major as shown in A above, including at least 30 semester hours in chemistry, supplemented by mathematics through differential and integral calculus, and at least 6 semester hours of physics, plus appropriate experience or additional education.

Education

This position has a positive education requirement. You must submit a copy of your academic transcripts OR a list of college courses with credit hours, dates completed, and grades received to verify education when applying for this position. If this information is not provided, your education may not be appropriately evaluated and you may lose consideration for this position. If you are selected for this position, you will have to provide an official copy of your transcripts prior to entering on duty. Application materials will not be returned.

A Ph.D. is required that was obtained within the last four years.

Contacts

• Address Agricultural Research Service 5601 Sunnyside Ave Beltsville, MD 20705 US
• Name: Heather Lee
• Phone: 301-956-3803
• Email: [email protected]