THIS IS A NATIONAL GUARD TITLE 32 EXCEPTED SERVICE POSITION. This National Guard position is for a AMMUNITION INSPECTOR, Position Description Number D2280000 and is part of the ID USPFO, National Guard. THIS POSITION IS TEMPORARILY FUNDED THROUGH FISCAL YEAR 2025, BUT MAY EXTEND IF AUTHORIZED.

Duties

1. Performs Ammunition Inspections pertaining to the receipt, classification, storage, issue and shipment of ammunition items. May receive shipments of all types of ammunition and verify DA form 1348 against Depot surveillance Records for correct NSN and Condition Code. Insures commercial carrier delivering ammunition has been inspected in accordance with regulations and standing operating procedures. Verifies quantity of containers for accuracy of nomenclature, stock and lot numbers against shipping documents and signs for shipments. Receives turn-ins from using organizations, counts each item received and inspects for serviceability. Classifies material to assure compatibility of explosive items. Studies new material to determine how it functions, how it is constructed and compatibility for storage purposes according to technical manuals. Assures that off post shipments of ammunition by commercial carriers are in accordance with ammunition policies and procedures and in compliance with Interstate Commerce Commission (ICC) and DoD regulations. Assures that ammunition is managed by class in accordance with established regulations. 2. Conducts inspection of ammunition being turned-in to determine suitability for further training needs. Takes appropriate steps in this disposition of CCH material. Ammunition Condition Reports (ACRs) are prepared and sent to item manager for disposition of restricted and/or suspended items. If disposition is determined to be locally demilitarized; contact designated EOD team and assist with demilitarization mission. 3. Prepares items for shipment to other depots and/or installations. Using the correct DOT regulations and packing requirements, makes sure all shipments meet DOT requirements. Items to be shipped are palletized and banded according to the hazard class division. Takes each pallet and establishes the correct weight and cube. Uses appropriate technical manuals, determines the proper name and UN number. Using this information, the appropriate 1348's are filled out and sent to Transportation Officer.Studies new material to determine how it functions, how it is constructed and compatibility for storage purposes according to technical manuals.Conducts observations and inspections of ammunition: In storage, inspects ammunition for corrosion from moisture and deterioration. Inspects for dents, loose detonators/fuses, discoloration and softness of dynamite and stains from nitroglycerin. Marks defective ammunition as prohibited for issue. Inspects ammunition of using organizations to determine its condition. Ensure that safety and storage requirements are properly observed. Responds to units which have misfires and/or malfunctions with ammo items.Conducts inspection of ammunition being turned-in to determine suitability for further training needs. Maintains a list of suspended ammunition and prepares listing for reporting excess to proper authorities for disposition. Assures suspended ammunition is withdrawn and no lots issued. Prepares condition reports on all bad ammunition, suspended lots, etc. Directs packaging, stenciling proper loading and blockage of excess ammunition. 4. Verification Inspection. Performs a variety of routine and special inspections of conventional ammunition. Performs quality monitoring of maintenance operations, area inspections magazine storage inspections and basic load inspections. Assists QASAS when requested. Maintains a variety of publications, regulations and files pertaining to work of the unit. The following are typical, but not all inclusive examples of work performed:Performs periodic, storage and special inspections and tests to determine quality safety and condition of a wide variety of ammunition, subcomponents, and materials used in the maintenance, modification and manufacture of ammunition items. Inspects such items as small arms ammunition, artillery and mortar ammunition, rockets, missiles, mines, grenades, bulk high explosives, propellants and propelling charges, etc. Inspects container, checks rounds and other items for defects and deterioration, and separates any questionable items for further inspection. Under the technical direction of a Quality Assurance Specialist Ammunition Surveillance (QASAS) or designated representative, assists in the disassembly of ammunition and components to make inspections. Uses Ammunition Peculiar Equipment to perform mechanical and electrical tests of ammunition, rockets and small missiles. Assists QASAS or designated representative in reassembling and repackaging ammunition items. Performs other duties as assigned.

Requirements

• NATIONAL GUARD MEMBERSHIP IS REQUIRED. If you are not sure you are eligible for military membership, please contact a National Guard recruiter prior to applying for this position.
• This is an excepted service position that requires membership in a compatible military assignment in the employing state's National Guard, required prior to the effective date of placement.
• Selectee will be required to wear the military uniform.
• Acceptance of an excepted service position constitutes concurrence with these requirements as a condition of employment.
• Applicants who are not currently a member of the National Guard must be eligible for immediate membership and employment in the National Guard in the military grade listed in this announcement.
• Males born after 31 December 1959 must be registered for Selective Service.
• Federal employment suitability as determined by a background investigation.
• May be required to successfully complete a probationary period.
• Participation in direct deposit is mandatory.
• Must be able to obtain/maintain clearance IAW AR 190-11 and pass local and national law enforcement files check, DA PAM 385-64 Explosives safety certification
• Must be able to obtain/maintain Secret Security Clearance.
• May require passing of pre-employment physical

Qualifications

Military Grades: E-3 to E-6 THE FOLLOWING QUALIFICATIONS MUST BE REPRESENTED BY THE CONTENTS OF YOUR RESUME. To ensure full credit is given for the qualification requirements listed below we suggest using the USA Jobs resume builder. IF YOU USE YOUR OWN RESUME, PLEASE ENSURE THAT YOU INCLUDE THE BEGINNING AND ENDING DATES (MONTH AND YEAR) FOR ALL JOBS LISTED IN YOUR RESUME. Verbiage displayed on your resume or application must contain your own words. You may refer to position descriptions, i.e. the general and specialized experience located within the vacancy announcement, to assist with describing work experiences; however, resumes or applications received in verbatim will not be considered. In your resume you will need to address the general and specialized experience listed below. Please use as much detail as needed, giving dates (months and years) of the experience, position title and how the experience was gained. This information is needed to determine if you are qualified for the position. GENERAL EXPERIENCE: Experience or training which demonstrates the ability to use and maintain tools and equipment associated with the type of work to be done, and to understand and follow oral and written instructions. Experience which demonstrates the knowledge of and the ability to apply safety standards. SPECIALIZED EXPERIENCE: Must have 12 Months of experience or training which demonstrates a vast knowledge necessary to recommend serviceability and detect hazardous or nonstandard conditions of ammunition and explosive items by visual examination or by use of test equipment. Technical knowledge of a variety of ammunition. May require knowledge of detonation and burning methods and procedures for the destruction of ammunition and explosives. Must be able to read, understand and research technical drawings, specifications, data sheets, serviceability standards, and technical manuals and references for ammunition and explosive items. Must have knowledge of regulations and standards for safety in receiving, shipping, storing, and handling of ammunition and explosives. Knowledge of inspection criteria related to commercial and military vehicles for unsafe mechanical conditions prior to loading with ammunition and explosives. Knowledge of environmental rules and regulations to ensure the Ammunition Supply Point has no infractions. Ability to recognize the various munitions and explosives to apply the proper procedure for inspecting. May require the ability to respond to unforeseen or emergency situations and be able to make immediate responses to emergency situations, determine the correct course of action to mitigate the problem. Ability to operate motor vehicles and forklifts for loading/unloading, transportation, and storage of Ammunition and Explosive materials.

Education

There are no educational requirements for this position.

Contacts

• Address ID USPFO 3489 W HARVARD ST Boise, ID 83705-6512 US
• Name: Benjamin O'Neal
• Phone: 208-272-3344
• Email: [email protected]