Job opening: MECHANICAL ENGINEER
Salary: $121 485 - 157 934 per year
Published at: Dec 03 2024
Employment Type: Full-time
You will serve as a MECHANICAL ENGINEER in the NAVAL AIR WARFARE CENTER AIRCRAFT DIVISION LAKEHURST SE & ALRE GROUP of NAVAIRWARCENADLKE.
Duties
You will serve as journeyman level mechanical engineer supporting development and sustainment of major programs, in which you will provide detailed guidance to other professional, technical, business, and administrative personnel.
You will aid in the planning and execution of technical efforts that include engineers, technicians, logisticians and program managers in support of program area.
You will represent NAWCADLKE and NAVAIR at high level meetings and conferences, providing technical guidance and status relating to the program area in your area of expertise.
You will meet regularly with representatives from other NAVAIR, Fleet Readiness Center activities, and commercial contractors to ensure proper application of engineering principles and practices on tactical Navy programs.
You will be involved in creating and reviewing technical requirement specifications, design documents and drawings.
You will be involved in verification plans, procedures and reports, installation plans, drawings and reports, program plans and cost estimates, and contract deliverables for a wide variety of projects.
Requirements
- Must be a US Citizen.
- Must be determined suitable for federal employment.
- Must participate in the direct deposit pay program.
- New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov
- Generally, current federal employees applying for GS jobs must serve at least one year at the next lower grade level. This requirement is called time-in-grade. Time-in-grade requirements must be met by the closing date of this announcement.
- Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.
- Males born after 12-31-59 must be registered for Selective Service.
- You will be required to successfully complete a pre-appointment physical examination.
- You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.
- This position is covered under the Defense Acquisition Workforce Improvement Act (DAWIA). Certification in the Acquisition Functional Area and category assigned to the position is required within established category timeframes.
- This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.
Qualifications
Your resume must demonstrate at least one year of specialized experience at or equivalent to the GS-12 grade level or pay band in the Federal service or equivalent experience in the private or public sector. Specialized experience must demonstrate the following: Specialized experience.
Design, development and analyze aircraft equipment and components to the Naval Air Warfare Center.
Perform life-cycle analysis, design, development, analysis, manufacturing, test and evaluation of the operational characteristics, features of specialized equipment as well as a familiarity of the utilization made of such equipment relative to aircraft and shipboard systems.
Perform as a technical engineering advisor on tactical aircraft design and analysis for both shore based and shipboard equipment and components.
Prepare and coordinate plans and proposals including long-range plans, to ensure plans and proposals reflect state-of-the-art technological changes.
Determine extent, scope, phasing and cost requirements and plan organization for projects in terms of staffing and scheduling requirements, to establish priorities for tasks identified.
Additional qualification information can be found from the following Office of Personnel Management website:
https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/#url=List-by-Occupational-Series AND https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/0800/files/all-professional-engineering-positions-0800.pdf
Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment.
Education
Applicants must meet the following basic education requirements of the Office of Personnel Management (OPM) Qualifications Standards Manual:
Successful completion of a professional engineering degree. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. Such education must demonstrate the knowledge, skills, and abilities necessary to do the work of the position.
OR
Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration For more information about EI and EIT registration requirements, please visit the National Society of Professional Engineers website at: http://www.nspe.org
OR
Evidence of having successfully passed the Fundamentals of Engineering (FE) examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico The FE examination is not administered by the U. S. Office of Personnel Management. For more information, please visit:
http://www.nspe.org/Licensure/HowtoGetLicensed/index.html.
OR
Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and in engineering that included the courses specified in the basic requirements under paragraph A (above). The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A (above)
OR
Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least one year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily, there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions.
Contacts
- Address NAVAIRWARCENADLKE
HRO Building 150
Lakehurst, NJ 08733
US
- Name: Department of Navy EIC
- Email: [email protected]
Map