This is a Direct Hire Authority (DHA) solicitation utilizing the DHA for Certain Personnel of the DoD Workforce to recruit and appoint qualified candidates to positions in the competitive service. About the Position: Serves as a Senior level Office Engineer responsible for District-wide Construction Contract Administration, performing a full range of office engineering activities, as well as some field activities, associated with construction operations and contract management.

Duties

Serve as Senior level Office Engineer responsible for District-wide Construction Contract Administration. Provide expert design and/or technical review of engineering features for the most significant, complex, or controversial projects assigned to their section. Provide technical input/oversight of both in-house and Architect- Engineer (A-E) contractor-designed projects for new construction; maintenance/alteration/repair of existing facilities, and for special projects or studies. Support construction operations and contract management with authorities prescribed by the Chief of Construction and the Contracting Officer.

Requirements

• Appointment may be subject to a suitability or fitness determination, as determined by a completed background investigation.
• NATIONAL AGENCY CHECK WITH WRITTEN INQUIRIES (NACI) - Appointment to this position is subject to a background investigation to determine your suitability for Federal employment.
• PROBATIONARY PERIOD - Appointment to this position is subject to a one year probationary period unless the appointee has previously met the requirements as described in 5 CFR Part 315.
• ADMINISTRATIVE CONTRACTING OFFICER - Incumbent must obtain appointment, via Contracting Officer Review Board, as an Administrative Contracting Officer within 6 months of appointment.
• At GS-12 level, Incumbent must obtain DAWIA contracting certification within 24 months of appointment.
• At GS-13 level, Incumbent must have DAWIA contracting certification at time of entry.
• Incumbent is required to possess or obtain and maintain a valid state driver’s license.

Qualifications

Who May Apply: US Citizens In order to qualify, you must meet the education and experience requirements described below. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social). You will receive credit for all qualifying experience, including volunteer experience. Your resume must clearly describe your relevant experience; if qualifying based on education, your transcripts will be required as part of your application. Additional information about transcripts is in this document. Basic Requirement for Civil Engineer/Fire Protection Engineer/Mechanical Engineer/Electrical Engineer: A. Degree: Bachelor's degree (or higher degree) in engineering. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher degree) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); OR (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. OR B. Combination of Education and Experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following: 1. Professional registration or licensure - Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions. 2. Written Test - Evidence of having successfully passed the Fundamentals of Engineering (FE) examination, or any other written test required for professional registration, by an engineering licensure board in the various States, the District of Columbia, Guam, or Puerto Rico. 3. Specified academic courses - Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in A above. The courses must be fully acceptable toward meeting the requirements of an engineering program. 4. Related curriculum - Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. Basic Requirement for Architect: A. Degree: Bachelor's degree (or higher degree) in architecture or in a related field that included 60 semester hours of course work in architecture or related disciplines of which at least (1) 30 semester hours were in architectural design, and (2) 6 semester hours were in each of the following: structural technology, properties of materials and methods of construction, and environmental control systems. OR B. Combination of Education and Experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the arts and sciences underlying professional architecture, and (2) a good understanding, both theoretical and practical, of the architectural principles, methods, and techniques and their applications to the design and construction or improvement of buildings. The adequacy of such background must be demonstrated by at least one of the following: (1) Related Curriculum - Degree in architectural engineering provided the completed course work in architectural engineering provided knowledge, skills, and abilities substantially equivalent to those provided in the courses specified in statement A above, or (2) Experience: 1 year of experience in an architect's office or in architectural work for each year short of graduation from a program of study in architecture. In the absence of any college courses, 5 years of such experience is required. This experience must have demonstrated that you have acquired a thorough knowledge of the fundamental principles and theories of professional architecture In addition to meeting the basic requirements above, to qualify for this position you must also meet the qualification requirements listed below: GS-12 Specialized Experience: One year of specialized experience equivalent to the GS-11 grade level in federal service which includes experience 1) assisting with resolution of engineering and/or architectural problems for varied and complex engineering projects. 2) planning with in-house and A-E designers for assigned projects 3) utilizing professional knowledge of methods, practices, and processes of civil, structural, mechanical, or electrical engineering; 4) applying practical knowledge of construction or construction management AND 5) administering various contracting actions. This definition of specialized experience is typical of work performed at the next lower grade/level position in the federal service (GS-11). GS-13 Specialized Experience: One year of specialized experience equivalent to the GS-12 grade level in federal service which includes experience 1) resolving engineering and/or architectural problems for varied and complex engineering projects. 2) planning with in-house and A-E designers for assigned projects 3) utilizing professional knowledge of methods, practices, and processes of civil, structural, mechanical, or electrical engineering; 4) applying practical knowledge of construction or construction management AND 5) overseeing contract administration. This definition of specialized experience is typical of work performed at the next lower grade/level position in the federal service (GS-12). Some federal jobs allow you to substitute your education for the required experience in order to qualify. For this job, you must meet the qualification requirement using experience alone--no substitution of education for experience is permitted.

Education

FOREIGN EDUCATION: If you are using education completed in foreign colleges or universities to meet the basic qualification requirements, you must show the education credentials have been evaluated by a private organization that specializes in interpretation of foreign education programs and such education has been deemed equivalent to that gained in an accredited U.S. education program; or full credit has been given for the courses at a U.S. accredited college or university. For further information, visit: https://sites.ed.gov/international/recognition-of-foreign-qualifications/

Contacts

• Address RD-W2SD03 US ARMY ENGINEER DISTRICT-NORFOLK DO NOT MAIL Norfolk, VA 23510 US
• Name: Army Applicant Help Desk