The primary purpose of this position is to exercise second level supervisory and managerial authorities over the Engineering Flight in the Civil Engineer Squadron. The Engineering Flight is responsible for providing project planning, program development, design, energy management, project management, contract execution, and technical support. Click on "Learn more about this agency" button below to view Eligibilities being considered and other IMPORTANT information.

Duties

Plans, organizes, and oversees the activities of the Engineering Flight. Exercises supervisory personnel management responsibilities. Represents the Engineering Flight with a variety of installation and functional area organizations. Establishes, defines, and implements requirements for the Engineering Flight activities to ensure services and functions are in line with organizational goals and mission requirements.

Requirements

• U.S. Citizenship Required
• Males must be registered for Selective Service, see www.sss.gov
• If authorized, PCS will be paid IAW JTR and AF Regulations. If receiving an authorized PCS, you may be subject to completing/signing a CONUS agreement. More information on PCS requirements, may be found at: https://afciviliancareers.com/regulatory/
• This posn is subject to provisions of the DoD Priority Placement Program
• Disclosure of Political Appointments
• Advance in hire may be authorized if there is demonstrable proof provided on your resume
• Recruitment Incentive may be authorized for this position
• Relocation Incentive may be authorized for this position
• Leave accrual may be authorized upon request
• Eligible for a Cost-of-Living-Allowance (COLA) which is subject to change without notice
• Direct Deposit: All federal employees are required to have direct deposit.
• Work may occasionally require travel away from the normal duty station on military or commercial aircraft. The work may require the employee to drive a motor vehicle. An appropriate, valid driver’s license may be required.
• A current professional registration or license as a Professional Engineer or Registered Architect in one of the 50 states or territories is required for this position.
• Must be able to obtain and maintain a Secret security clearance. This is a Supervisory Position. A 1 year supervisory probationary period is required if applicant selected has not previously met this requirement.
• The duties of this position meet all requirements as a category 4 designation, and shall not be vacated during a national emergency or mobilization without seriously impairing the capability of the parent Federal Agency or office (Cont’d...)
• to function effectively. This position must be removed from the Ready Reserve and cannot become a member of the Ready Reserve. (IAW: DoDD 1200.7, "Screening the Ready Reserve,")
• This is a Mission-Essential position performing a Mission-Critical-Function which must continue uninterrupted after the occurrence of an emergency and continued through full resumption of all functions.
• This position has been designated by the Air Force as a Testing Designated Position (TDP) under the Air Force Civilian Drug Demand Reduction Program. Employee must pass initial and periodic short notice drug testing. (Cont’d...)
• Illegal drug use by employees in sensitive positions presents a clear threat to the mission of the Air Force, national security, and public safety.
• This is a Centrally Managed Position in the General Engineering Career Field. PCS will be paid in accordance with JTR Vol. 2 and applicable Air Force Regulations.

Qualifications

In order to qualify, you must meet the requirements described in the Office of Personnel Management (OPM) Qualification Standards for General Schedule Positions, Group Coverage Qualification Standard for Professional and Scientific Positions. BASIC REQUIREMENT OR INDIVIDUAL OCCUPATIONAL REQUIREMENT: Degree: Engineering. To be acceptable, the program must: (1) lead to a bachelor's degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. NOTE: You must submit a copy of transcripts with your application. OR Combination of education and experience -- college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following: Professional registration or licensure -- Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions. Written Test -- Evidence of having successfully passed the Fundamentals of Engineering (FE) examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico. Specified academic courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A. Related curriculum -- Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all-inclusive.) In addition to meeting the basic requirement above, to qualify for this position you must also meet the qualification requirements listed below: SPECIALIZED EXPERIENCE: Applicants must have at least one (1) year of specialized experience at the next lower grade GS-13, or equivalent in other pay systems. Examples of specialized experience include: Knowledge of a wide range of multidisciplinary professional engineering theories, concepts, principles, standards, methods, techniques, materials, and equipment, as well as knowledge of standard construction and contracting regulations, practices, and procedures; developing goals and objectives that integrate program development, project design, construction management, and technical support to other flights in the oversight of the Base Comprehensive Asset Management Plan (BCAMP) and Base Activity Management Plan (BAMP); utilizing knowledge of multiple engineering disciplines to monitor and manage projects, analyze and assess facility requirements, evaluate and recommend programs, and develop Facilities AMPs and Sub-AMPs. FEDERAL TIME-IN-GRADE (TIG) REQUIREMENT FOR GENERAL SCHEDULE (GS) POSITIONS: Merit promotion applicants must meet applicable time-in-­grade requirements to be considered eligible. One year at the GS-13 level is required to meet the time-in-grade requirements for the GS-14 level. TIG applies if you are in a current GS position or held a GS position within the previous 52 weeks. NOTE: Applicants applying as VEOA candidates who are current GS civil service employees or are prior GS civil service employees within the past 52 weeks must also meet time-in-grade requirements. KNOWLEDGE, SKILLS AND ABILITIES (KSAs): Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the following areas: Knowledge of a wide range of multidisciplinary professional engineering theories, concepts, principles, standards, methods, techniques, materials, and equipment, as well as knowledge of standard construction and contracting regulations, practices, and procedures. Knowledge of the principles of planning and program management; common business and economic principles, theories, concepts, and procedures; financial management principles and standards; and of the DoD Planning, Programming, and Budgeting System (PPBS). Knowledge of safety, security, personnel management, and EEO regulations, practices, and procedures. Skill in evaluating state-of-the-art scientific and engineering technologies and incorporating into the planning, design, operation, maintenance, repair and upgrade of installation natural/built infrastructure. Ability to analyze, plan, organize, and direct the work operations to meet program requirements and objectives with available resources; and to mentor, motivate, and appraise the staff of an organization. Ability to communicate effectively, both orally and in writing, with senior officials from a broad array of activities, including federal and local government, and industry. PART-TIME OR UNPAID EXPERIENCE: Credit will be given for appropriate unpaid and or part-time work. You must clearly identify the duties and responsibilities in each position held and the total number of hours per week. VOLUNTEER WORK EXPERIENCE: Refers to paid and unpaid experience, including volunteer work done through National Service Programs (i.e., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student and social). Volunteer work helps build critical competencies, knowledge and skills that can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience.

Education

IF USING EDUCATION TO QUALIFY: If position has a positive degree requirement or education forms the basis for qualifications, you MUST submit transcriptswith the application. Official transcripts are not required at the time of application; however, if position has a positive degree requirement, qualifying based on education alone or in combination with experience, transcripts must be verified prior to appointment. An accrediting institution recognized by the U.S. Department of Education must accredit education. Click here to check accreditation.

FOREIGN EDUCATION: Education completed in foreign colleges or universities may be used to meet the requirements. You must show proof the education credentials have been deemed to be at least equivalent to that gained in conventional U.S. education program. It is your responsibility to provide such evidence when applying.

Contacts

• Address Eielson AFB 354 Broadway Street Suite 139 Eielson AFB, AK 99702 US
• Name: Total Force Service Center
• Phone: 1-800-525-0102
• Email: [email protected]