Job opening: Electronics Engineer
Salary: $39 576 - 94 317 per year
Published at: Nov 13 2024
Employment Type: Full-time
Please limit your resume to 5 pages. If more than 5 pages are submitted, only the first 5 pages will be reviewed to determine your eligibility/qualifications.
This is a Direct Hire Authority (DHA) solicitation utilizing the DHA for Domestic Defense Industrial Base Facilities and the Major Range and Test Facilities Base Positions to recruit and appoint qualified candidates to positions in the competitive service.
About the Position: Is located in the Qualifications Section.
Duties
Perform technical analysis, and detailed system design to prepare concept plans and proposals for satisfying user requirements.
Assist in review and evaluation of shop drawings, samples, and material certifications submitted by the contractor for contract and performance requirements, recommending approval, rejection, or receipt.
Coordinate with other engineering disciplines to ensure that all technical areas are covered, areas of overlapping responsibilities between technical disciplines receive proper design consideration.
Prepare correspondence, technical reports, fact sheets, status reports, and schedules as required to complete project assignments.
Prepare detailed cost estimates for use in bid evaluations and for monitoring in-house material and man-hour expenditures.
Responsible for the research, design, development, specification, project management, and redesign of industrial electronic controls and associated equipment.
Ensure contract and in-house conformance with contracts and plans making recommendations as to the suitability of new processes and methods.
Requirements
- Appointment may be subject to a suitability or fitness determination, as determined by a completed background investigation.
- Incumbent must obtain and maintain a valid, state-issued driver’s license.
- Incumbent is required to submit a Confidential Financial Disclosure Report, OGE-450 upon entering the position and annually, in accordance with DoD Directive 5500-7-R, Joint Ethics Regulation, dated 17-Nov-2011.
Qualifications
About the Position: This vacancy is a career ladder position. Selection may be made at GS-5, GS-7, GS-9, or GS-11 level.
Who May Apply: US Citizens
In order to qualify, you must meet the education and experience requirements described below. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social). You will receive credit for all qualifying experience, including volunteer experience. Your resume must clearly describe your relevant experience; if qualifying based on education, your transcripts will be required as part of your application. Additional information about transcripts is in this document.
In addition to meeting the basic requirement listed in the education section; to qualify for this position you must also meet the qualification requirements listed below:
GS-05 Electronics Engineer: Must have a Bachelor's degree (or higher degree) in Engineering.
GS-07 Electronics Engineer: Specialized Experience: One year of specialized experience which includes assisting a senior level professional Engineer in 1) reviewing electronic designs in industrial and ammunition production, and 2) assisting senior level Engineers in reviewing technical specifications of electronic systems to ensure they meet customer expectation. This definition of specialized experience is typical of work performed at the next lower grade/level position in the federal service (GS-05).
OR
Education: One full academic year of graduate level education in a field which demonstrates the knowledge, skills, and abilities necessary to do the work of the position, such as Electronics Engineering. (Note: You must attach a copy of your transcripts)
OR
Superior Academic Achievement. In order to be creditable under this provision, Superior Academic Achievement must have been gained in a curriculum that is qualifying for the position to be filled, such as that identified in Education above. Superior Academic Achievement is based on: (1) Class Standing - Applicants must be in the upper third of the graduating class in the college, university, or major subdivision, such as the College of Liberal Arts or the School of Business Administration, based on completed courses; OR(2) Grade-Point Average - Applicants must have a grade-point average of either (a) 3.0 or higher out of a possible 4.0 ("B" or better) as recorded on your official transcript, or as computed based on 4 years of education, or as computed based on courses completed during the final 2 years of the curriculum; or (b) 3.5 or higher out of a possible 4.0 ("B+" or better) based on the average of the required courses completed in the major field or the required courses in the major field completed during the final 2 years of the curriculum.; OR(3) Honor Society Membership - Applicants may be considered eligible based on membership in one of the approved national scholastic honor societies listed by the Association of College Honor Societies (https://www.achsnatl.org/). (Note: You must attach a copy of your transcripts.)
OR
Combination of Education and Experience: A combination of education and experience may be used to qualify for this position as long as the computed percentage of the requirements is at least 100%. To compute the percentage of the requirements, divide your total months of experience by 12. Then divide the total number of completed graduate semester hours (or equivalent) by 18. Add the two percentages.
GS-09 Electronics Engineer: Specialized Experience: One year of specialized experience which includes assisting a senior level professional Engineer in 1) reviewing electronic designs in industrial and ammunition production; 2) assisting senior level Engineers in reviewing technical specifications of electronic systems to ensure they meet customer expectation; AND 3) assist senior level Engineer in preparing production planning, optimize process flow, create test procedure/work instruction to support industrial electronic equipment and systems. This definition of specialized experience is typical of work performed at the next lower grade/level position in the federal service (GS-07). (Note: You must attach a copy of your transcripts.)
OR
Education: Master's or equivalent graduate degree or 2 full years of progressively higher level graduate education leading to such a degree in a field which demonstrates the knowledge, skills, and abilities necessary to do the work of the position, such as: Engineering or Computer Science. (Note: You must attach a copy of your transcripts.)
OR
Combination of Education and Experience: A combination of education and experience may be used to qualify for this position as long as the computed percentage of the requirements is at least 100%. To compute the percentage of the requirements, divide your total months of experience by 12. Then divide the total number of completed graduate semester hours (or equivalent) beyond the first year (total graduate semester hours minus 18) by 18. Add the two percentages. (Note: You must attach a copy of your transcripts.)
GS-11 Electronics Engineer: Specialized Experience: One year of specialized experience as a professional Engineer 1) preparing plans and specifications for electronic systems; 2) analyzing technical specifications of electronic systems; AND 3) perform electronic engineering projects based off defined policies and directives. This definition of specialized experience is typical of work performed at the next lower grade/level position in the federal service (GS-09). (Note: You must attach a copy of your transcripts.)
OR
Education: Ph.D. or equivalent doctoral degree or 3 full years of progressively higher level graduate education leading to such a degree in a field which demonstrates the knowledge, skills, and abilities necessary to do the work of the position, such as: Engineering or Computer Science. (Note: You must attach a copy of your transcripts.)
OR
Combination of Education and Experience: A combination of education and experience may be used to qualify for this position as long as the computed percentage of the requirements is at least 100%. To compute the percentage of the requirements, divide your total months of experience by 12. Then divide the total number of completed graduate semester hours (or equivalent) beyond the second year (total graduate semester hours minus 36) by 18. Add the two percentages.
Applicants must meet basic eligibility requirements such as minimum qualifications, and other regulatory requirements by the closing date of the announcement.
Education
Basic Requirement for Electronics Engineer:
A. Degree: Bachelor's degree (or higher degree) in engineering. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher degree) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); OR (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.
OR
B. Combination of Education and Experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:
1. Professional registration or licensure - Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.
2. Written Test - Evidence of having successfully passed the Fundamentals of Engineering (FE) examination, or any other written test required for professional registration, by an engineering licensure board in the various States, the District of Columbia, Guam, or Puerto Rico.
3. Specified academic courses - Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in A above. The courses must be fully acceptable toward meeting the requirements of an engineering program.
4. Related curriculum - Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions.
FOREIGN EDUCATION: If you are using education completed in foreign colleges or universities to meet the qualification requirements, you must show the education credentials have been evaluated by a private organization that specializes in interpretation of foreign education programs and such education has been deemed equivalent to that gained in an accredited U.S. education program; or full credit has been given for the courses at a U.S. accredited college or university. For further information, visit:
https://sites.ed.gov/international/recognition-of-foreign-qualifications/
Contacts
- Address GL-W390AA MCALESTER ARMY AMMUNITION PLANT
DO NOT MAIL
McAlester, OK 74501
US
- Name: Army Applicant Help Desk
- Email: [email protected]
Map