This is a public notice flyer to notify interested applicants of anticipated vacancies being advertised through the Direct-Hire Authority for Certain Personnel of the DoD Workforce. Applications will NOT be accepted through this flyer. Interested applicants should review the "How to Apply" section of this flyer for more information on how to be considered. This flyer will be used as positions become available. There may or may not be actual vacancies filled from this flyer.

Duties

Performs geo-environmental and geotechnical designs and studies in support of Hazardous Toxic and Radiological Waste (HTRW), Civil and MIitary programs. Arranges and conducts in-house design team meetings or briefings with review authority and consultants. Performs reviews of A-E work and provides technical expertise to customers. Prepares, performs and directs environmental engineering aspects of design studies, reports and contract documents. Develops preliminary and final detailed design plans, technical provisions of specifications, design analysis, comparative cost estimates, and modifications.

Requirements

• Appointment may be subject to a suitability or fitness determination, as determined by a completed background investigation.
• This position requires travel away from the official duty station for approximately 25% of the time on an annual basis.
• Appointment to this position is subject to a one year probationary period unless the appointee has previously met the requirements as described in 5 CFR Part 315. While probationary the incumbent can be terminated with limited appeal rights.
• This position requires you to obtain and maintain a Valid State Driver’s License in one of the 50 U.S. states or possessions to operate vehicles.
• May be subject to medical examination for medical surveillance to comply with OSHA regulations, requiring a physical every two years.

Qualifications

This is a Direct Hire Authority (DHA) solicitation utilizing the DHA for Certain Personnel in DoD Workforce to recruit and appoint qualified candidates to positions in the competitive service. Who May Apply: US Citizens In order to qualify, you must meet the education and experience requirements described below. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social). You will receive credit for all qualifying experience, including volunteer experience. Your resume must clearly describe your relevant experience; if qualifying based on education, your transcripts will be required as part of your application. Additional information about transcripts is in this document. To qualify for this position, you must meet the specialized experienced and the educational requirement. Specialized Experience: One year of specialized experience equivalent to the GS-11 grade level (or equivalent) in the Federal Service which includes: 1) Conducting field engineering or environmental engineering analyses on projects for hazardous waste, environmental remediation/restoration, or air quality compliance requirements; 2) Prepares A-E scopes, investigation plans, laboratory analyses, reports, remedial design, contract plans, and specifications for all aspects of geo-environmental work; 3) Communicating with internal/external customers, stakeholders, or state/federal agencies regarding environmental investigation, design, or remediation activities. Select the one statement that best describes the education that you possess that demonstrates your ability to perform the work of an Environmental Engineer at the GS-12 grade level or equivalent pay band in the Federal Service. A. I have a bachelor's degree (or higher degree) in engineering. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher degree) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); OR (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. (Note: You must attach a copy of your transcripts.) B. I have a combination of education and experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. I am currently registered as an Engineer Intern (EI), Engineer in Training (EIT), or licensed as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions. (Note: You must attach a copy of your transcripts.) C. I have a combination of education and experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. I have successfully passed the Fundamentals of Engineering (FE) examination, or any other written test required for professional registration, by an engineering licensure board in the various States, the District of Columbia, Guam, or Puerto Rico. (Note: You must attach a copy of your transcripts.) D. I have a combination of education and experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. I have successfully completed at least 60 semester hours or 90 quarter hours of courses in the physical, mathematical, and engineering sciences that included the courses specified in A above. The courses must be fully acceptable toward meeting the requirements of an engineering program. (Note: You must attach a copy of your transcripts.) E. I have a combination of education and experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. I have successfully completed a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, and have at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all-inclusive.) (Note: You must attach a copy of your transcripts.)

Education

Education Requirements: All applicants must meet the following education requirement:

Select the one statement that best describes the education that you possess that demonstrates your ability to perform the work of an Environmental Engineer at the GS-12 grade level or equivalent pay band in the Federal Service.
A. I have a bachelor's degree (or higher degree) in engineering. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher degree) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); OR (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. (Note: You must attach a copy of your transcripts.)
B. I have a combination of education and experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. I am currently registered as an Engineer Intern (EI), Engineer in Training (EIT), or licensed as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions. (Note: You must attach a copy of your transcripts.)
C. I have a combination of education and experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. I have successfully passed the Fundamentals of Engineering (FE) examination, or any other written test required for professional registration, by an engineering licensure board in the various States, the District of Columbia, Guam, or Puerto Rico. (Note: You must attach a copy of your transcripts.)
D. I have a combination of education and experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. I have successfully completed at least 60 semester hours or 90 quarter hours of courses in the physical, mathematical, and engineering sciences that included the courses specified in A above. The courses must be fully acceptable toward meeting the requirements of an engineering program. (Note: You must attach a copy of your transcripts.)
E. I have a combination of education and experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. I have successfully completed a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, and have at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all-inclusive.) (Note: You must attach a copy of your transcripts.)

FOREIGN EDUCATION: If you are using education completed in foreign colleges or universities to meet the qualification requirements, you must show the education credentials have been evaluated by a private organization that specializes in interpretation of foreign education programs and such education has been deemed equivalent to that gained in an accredited U.S. education program; or full credit has been given for the courses at a U.S. accredited college or university. For further information, visit: https://sites.ed.gov/international/recognition-of-foreign-qualifications.

Contacts

• Address RD-W2SF04 US ARMY ENGINEER DIST-PHILADELPHIA DO NOT MAIL Philadelphia, PA 19103 US
• Name: Seth Cleaver
• Phone: 570-441-3806
• Email: [email protected]