THIS IS A NATIONAL GUARD TITLE 32 EXCEPTED SERVICE POSITION. This National Guard position is for a Aircraft Engine Mechanic, PD Number D1636000 & is part of the Air National Guard. Area of Consideration: Open to members of the Air National Guard, Active Duty Air Force or Air Force Reserves. This is a full-time, Excepted Temporary, dual status position which requires Air National Guard Membership. Position is Indefinite however, may convert to permanent without further competition.

Duties

As an Aircraft Engine Mechanic, WG-8602-10, you will: Remove, install, certify, repair, modify, overhaul, and install turboprop engines, reduction gear boxes, turbine modules, compressor modules, auxiliary power units, propellers and related propeller components as required. Perform maintenance on all propulsion systems including troubleshooting and diagnosing defects, certifying, conducting bench checks, performing in-shop and on-equipment repairs and overhaul. Diagnose malfunctions using computerized test equipment, schematic diagrams, technical publications and perform the appropriate repair according to the test results and analysis. Determine the extent of disassembly necessary to repair, overhaul, replace and certify all engine, propeller and auxiliary power unit parts. Clean and inspect engine and propeller component parts such as turbines, gearboxes, blades, gears, bearings, etc. Assemble engines, propellers and auxiliary power units, adhering to prescribed procedures, torque values, safety methods and clearances. Troubleshoot propellers using electric and hydraulic test stands to check for proper operation and evidence of oil leakage. Operationally check engines and propeller assemblies and auxiliary power units, by using the engine test cell facility to meet all full power run checks on the engine and propeller assemblies and auxiliary power units. Modify engines, propellers, auxiliary power units, and components in accordance with Time Compliance Technical Orders (TCTO) directives; remove and install engine quick change kits; prepare engines for installation and install engine and propeller assemblies on aircraft. Evaluate technical problems of repair, overhaul, modification and installation of aircraft propulsion systems. Solve all types of maintenance problems and perform bench checks and test engine and propeller assemblies for serviceability. Perform operational checks of installed propellers, engines, auxiliary power units and sub-systems during aircraft maintenance ground runs in accordance with approved checklists. Employ test equipment such as computer borescope, fuel pressure gauges, air pressure gauges, and alignment fixtures. Utilize special tools and precision measuring equipment, high-pressure hydraulic test equipment, and electronic test equipment. Perform isochronal and special evaluations on engines, propellers and auxiliary power units. Interpret certification findings and determine adequacy of corrective action. Certify installed and repaired engines for compliance with technical publications. Perform fixed and mobile test stand functions (which may include maintenance of engine test cell facility); install special test equipment; perform pre-operational and post operational checks. Operate engines and propellers and record test data. Operate, certify, and maintain computerized engine test/trim automated systems (ETTAS) on the engine test cell. Evaluate, identify and correct problems on propeller and engine components causing vibration or impending failure using the ETTAS system, and vibration analyzer. Evaluate engine and propeller performance by computing engine torque and specific fuel consumption. Monitor engine RPM and turbine inlet temperatures. Evaluate engine and propeller performance and accept or reject the individual components. Remove engine and propeller from test stand and prepare units for aircraft installation or storage. Accomplish operator maintenance on the aircraft and engine sound suppressor facility, test stands and various pieces of ground equipment, including the auxiliary power unit test cell. Perform dynamic propeller balancing and test the propeller integrated synchophasing. Test variable potentiometers, servo-motors, indicators and aircraft wiring. Perform aircraft full power runs and complete engine and propeller efficiency checks. Clear Red X symbol documentation on engine and propeller related components. Prepare man-hour data collection and required forms for input into the Core Automated Maintenance System (CAMS) or the G081 (AFI 22-2101, CAMS for Mobility). Review and assist in maintaining Technical Orders (TOs) and other technical publications and directives pertinent to the element. Maintain bench stock, parts, and equipment. Assist the material control function in identifying part numbers and stock numbers for processing and controlling of repair cycle assets. Provide on-the-job training for assigned personnel. Plan and conduct formal classes of instruction in techniques of repair and maintenance of aircraft engine, propeller, auxiliary power unit, and related equipment and in the use of diagrams, blueprints, wiring schematics and technical publications. Evaluate effectiveness of training by observation and through written and oral examinations. Advise supervisor of the experience and skill levels of assigned personnel. Maintain training documentation. Perform other duties as assigned.

Requirements

• NATIONAL GUARD MEMBERSHIP IS REQUIRED. If you are not sure you are eligible for military membership, please contact a National Guard recruiter prior to applying for this position.
• This is an excepted service position that requires membership in a compatible military assignment in the employing state's National Guard, required prior to the effective date of placement.
• Selectee will be required to wear the military uniform.
• Acceptance of an excepted service position constitutes concurrence with these requirements as a condition of employment.
• Applicants who are not currently a member of the National Guard must be eligible for immediate membership and employment in the National Guard in the military grade listed in this announcement.
• Males born after 31 December 1959 must be registered for Selective Service.
• Federal employment suitability as determined by a background investigation.
• May be required to successfully complete a probationary period.
• Participation in direct deposit is mandatory.
• Preplacement Medical Requirements: Selectee will be required to undergo medical testing, at the expense of the government, prior to beginning employment. Medical tests are used to determine fitness and eligibility for employment.
• Must be able to obtain and maintain a secret security clearance. The incumbent of this position description must have at a minimum, a completed National Agency Check (NAC) prior to position assignment.
• Must be able to obtain required certifications, as applicable.
• This position is covered by the Domestic Violence Misdemeanor Amendment (30 Sep 96) of the Gun Control Act (Lautenberg Amendment) of 1968. An individual convicted of a qualifying crime of domestic violence may not perform the duties of this position.
• Ability to establish effective professional working relationships with coworkers and customers, contributing to a cooperative working environment and successful accomplishment of the mission.
• Irregular and/or overtime (compensatory) hours may be required to support operational requirements or contingencies or may be required to work hours outside of the normal duty day.
• May require travel in military and/or commercial aircraft to perform temporary duty assignments.
• The work may require the incumbent to drive a motor vehicle; if so, and an appropriate valid driver’s license is mandatory.
• This position is designated as Essential Personnel and may be subject to duty in preparation for, or in response to, a state emergency or disaster declaration.
• This designation will not exceed 14 calendar days per year unless otherwise approved in advance by the TAG.

Qualifications

Military Grades: SRA - TSgt Compatible Military Assignments: 2A6X1 GENERAL EXPERIENCE: Experience or training that has provided the ability to perform assembly and disassembly operations and make prescribed modifications to aircraft engines, engine assemblies, and accessories in accordance with technical specifications, procedures and requirements. Experience using hand and power tools common to the trade. SPECIALIZED EXPERIENCE: Experience or training performing standard, routine assembly and disassembly operations and making prescribed modifications to aircraft engines, engine assemblies, and accessories. Experience or training performing maintenance overhaul, troubleshooting, testing, and repair of aircraft engines, engine components, and power trains for fixed and/or rotary wing aircraft. Experience determining maintenance needed from work orders, inspection reports, historical record, and by own diagnosis. WORKING CONDITIONS: Work assignments are performed indoors and outdoors in inclement weather; on icy, wet, and slippery ramps, aircraft surfaces, work stands; and in extreme temperature and humidity. The incumbent is subject to dangers from toxic fumes, dust, dirt, grease, lubricants, paints, and solvents. Dangers also involve high-pressure air and fluids, and fast actuating metal aircraft surfaces such as landing gears, speed brakes, and flaps. Work assignments are subject to engine noise, heat blast, intake suction, rotating propellers, explosive munitions, electrical voltage, cartridge actuating devices, liquid oxygen, and flammable and explosive aircraft fuels, etc. There is frequent exposure to the possibility of cuts, burns, electrical shock, strains, and bone fractures. PHYSICAL EFFORTS: The incumbent is required to stand, stoop, bend, and reach. The incumbent frequently lifts equipment and components weighing up to 10 pounds, and often lifts and carries assemblies weighing up to 50 pounds. Hoists, hand trucks, lifts, and other employees are available to assist when handling heavy or awkward items. Work assignments require the employee to climb steps and ladders and stand on slippery or inclined surfaces.

Education

You must provide transcripts or other documentation to support your Educational claims. To receive credit for Education, you must provide documentation of proof that you meet the Education requirements for this position.

Contacts

• Address GA 165th MAI SQ 1401 Robert B Miller Jr Drive Garden City, GA 31408 US
• Name: Olivia Green
• Phone: 678-569-5251
• Email: [email protected]