This position is located within Region 1 on the Flathead National Forest with a duty station of Kalispell, MT. This position serves as a Forest Engineer for a National Forest. For additional information about the duties of this position, please contact Christopher D. Prew at [email protected].

Duties

Determines need for, initiates, and formulates policy, practices, procedures, and methods related to areas of responsibility for the guidance of subordinate staff. Negotiates settlement of differences for all construction contracts under engineering and recommends a basis for satisfactory settlements to contracting officer in formal contract construction. Recommends changes in program direction as indicated by changing direction from the Regional level, rate of progress toward goals and objectives, and other factors which influence the engineering and safety programs. Participates with other staff officers and District Rangers as a team member representing engineering to arrive at recommendations for the engineering organization, engineering programs, and objectives. Participates with the Supervisor and other staff officers as a problem-solving team member. Makes recommendations for solutions to areas of responsibility and developmental programs, participating also in total Forest activities. Gives expert advice about the implementation of proposed policies, plans, and programs. Establishes and communicates guidelines and performance requirements to employees; conducts formal performance reviews; and identifies and provides for the developmental and training needs of employees. Performs administrative and human resources management functions for the unit; provides advice, counsel, or instruction on both administrative and work matters; and assures full compliance with safety regulations. Hears and resolves employee complaints, effects minor disciplinary measures, and recommends action in more serious cases. Performs supervisory duties 20% or less of the time.

Requirements

• Must be a U.S. Citizen or National.
• Males born after 12/31/1959 must be Selective Service registered or exempt.
• Subject to satisfactory adjudication of background investigation and/or fingerprint check.
• Successful completion of one year probationary period, unless previously served.
• Per Public Law 104-134 all Federal employees are required to have federal payments made by direct deposit to their financial institution.
• Successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov.
• New USDA supervisors must successfully complete all components of the required new supervisory training program before the end of their probationary period.

Qualifications

In order to qualify, you must meet the eligibility and qualifications requirements as defined below by the closing date of the announcement. For more information on the qualifications for this position, visit the Office of Personnel Management's General Schedule Qualification Standards. Your application and resume must clearly show that you possess the experience requirements. Transcripts must be provided for qualifications based on education. Provide course descriptions as necessary. Basic Requirement: Civil Engineer, GS-0810 Series: Applicants must meet all qualifications and eligibility requirements by the closing date of the announcement as defined below. For more information on the qualifications for this position, go to: Civil Engineering Series 0810 A. Degree: Engineering. To be acceptable, the program must: (1) lead to a bachelor's degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. -OR- B. Combination of education and experience -- college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following: Professional registration or licensure -- Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions. Written Test -- Evidence of having successfully passed the Fundamentals of Engineering (FE) examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico. Specified academic courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A. Related curriculum -- Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all inclusive.) Note: An applicant who meets the basic requirements as specified in A or B above, except as noted under B.1., may qualify for positions in any branch of engineering unless selective factors indicate otherwise. In addition to meeting the basic requirement, you must also possess experience in the amounts listed below. Specialized Experience Requirement: For the GS-12 level: Applicants must have one year of specialized experience equivalent to at least the GS-11 level in the Federal Service. Examples of specialized experience include all of the following: Provided professional engineering input into the interdisciplinary planning process for natural resource development activities involving engineering projects. Prepared original designs and preliminary and final layouts for road design, small bridges, retaining walls, major drainage structures, erosion control features, buildings, towers, equipment shops and yards, small dams and reservoirs or recreation sites. Prepared or supervised preparation of special design specifications, cost estimates, and complete design package for engineering projects. Coordinated with other resource area specialists to complete environmental documents and clearances. TIME IN GRADE REQUIREMENT: If you are a current federal employee in the General Schedule (GS) pay plan and applying for a promotion opportunity, you must meet time-in-grade (TIG) requirements of 52 weeks of service at the next lower grade level in the normal line of progression for the position being filled. This requirement must be met by the closing date of this announcement. Work Experience: Your resume must clearly document the following for each block of work experience; the beginning day, month and year the work assignment started and ended; the hours worked per week; position title, and series and grade if applicable; and description of duties performed. This information must be provided for each permanent, temporary, or seasonal appointment/work assignment or volunteer work and should be clearly documented as a separate block of time. Incomplete, inaccurate, or conflicting work history may not be credited for qualifications purposes. This can result in an applicant not being considered for the position. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience.

Education

See above for Education requirements.

Contacts

• Address USDA Forest Service HRM Contact Center DO NOT MAIL IN APPLICATIONS, SEE INSTRUCTIONS IN THE ANNOUNCEMENT. Albuquerque, NM 87109 US
• Name: HRM Contact Center
• Phone: 1-877-372-7248 X2
• Email: [email protected]