Job opening: Interdisciplinary
Salary: $82 764 - 128 956 per year
Relocation: YES
Published at: Oct 30 2024
Employment Type: Full-time
This is a Direct Hire Authority (DHA) solicitation utilizing the DHA for Certain Personnel of the DoD Workforce to recruit and appoint qualified candidates to positions in the competitive service.
About the Position: This is a permanent position with the U.S. Army Engineer Division, Transatlantic Middle East District Management Branch located in Winchester, VA.
Duties
Serve as the district representative for assigned projects to both internal and external stakeholders and customers.
Manage the project delivery team to establish project scope, schedule, and budget.
Responsible for project during construction via close coordination with the quality assurance management team and program funding.
Act as official point of contact and as an authority in resolving problems related to assigned projects.
Utilize a well-developed professional knowledge of engineering techniques, theories, and practices.
Requirements
- Appointment may be subject to a suitability or fitness determination, as determined by a completed background investigation.
- This position requires the incumbent be able to obtain and maintain a determination of eligibility for a SECRET security clearance or access for the duration of employment. A background investigation and credit check are required.
- This position requires you to submit a Public Financial Disclosure Report (OGE 278) or a Confidential Financial Disclosure Report (OGE450) upon entry, and annually thereafter.
- Scheduled and/or unscheduled overtime will be required to meet mission goals.
- Performance of duties may require the wearing of military clothing and compliance with force protection requirement; i.e, helmet, flak jacket, etc.
- Frequent travel within the Area of Responsibility (AOR) contingency deployment area may be required 10-20% of the year and more depending on mission requirements.
Qualifications
Who May Apply: US Citizens
In order to qualify, you must meet the education and experience requirements described below. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social). You will receive credit for all qualifying experience, including volunteer experience. Your resume must clearly describe your relevant experience; if qualifying based on education, your transcripts will be required as part of your application. Additional information about transcripts is in this document.
Basic Requirement for Civil Engineer, Mechanical Engineer, Electrical Engineer, General Engineer or Environmental Engineer:
A. Degree: Bachelor's degree (or higher degree) in engineering. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher degree) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); OR (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. (Note: You must attach a copy of your transcripts.)
OR
B.Combination of Education and Experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:
1. Professional registration or licensure - Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.
2. Written Test - Evidence of having successfully passed the Fundamentals of Engineering (FE) examination, or any other written test required for professional registration, by an engineering licensure board in the various States, the District of Columbia, Guam, or Puerto Rico.
3. Specified academic courses - Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in A above. The courses must be fully acceptable toward meeting the requirements of an engineering program.
4. Related curriculum - Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (Note: You must attach a copy of your transcripts.)
Basic Requirement for Architect:
A. Degree: Bachelor's degree (or higher degree) in architecture or in a related field that included 60 semester hours of course work in architecture or related disciplines of which at least (1) 30 semester hours were in architectural design, and (2) 6 semester hours were in each of the following: structural technology, properties of materials and methods of construction, and environmental control systems. (Note: You must attach a copy of your transcripts.)
OR
B. Combination of Education and Experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the arts and sciences underlying professional architecture, and (2) a good understanding, both theoretical and practical, of the architectural principles, methods, and techniques and their applications to the design and construction or improvement of buildings. The adequacy of such background must be demonstrated by at least one of the following: (1) Related Curriculum - Degree in architectural engineering provided the completed course work in architectural engineering provided knowledge, skills, and abilities substantially equivalent to those provided in the courses specified in statement A above, or (2) Experience: 1 year of experience in an architect's office or in architectural work for each year short of graduation from a program of study in architecture. In the absence of any college courses, 5 years of such experience is required. This experience must have demonstrated that you have acquired a thorough knowledge of the fundamental principles and theories of professional architecture. (Note: You must attach a copy of your transcripts.)
In addition to meeting the basic requirement above, to qualify for this position you must also meet the qualification requirements listed below:
GS-11 Specialized Experience:One year of specialized experience which includes: 1) Assisting with conducting constructability review of project designs and specifications to determine site compatibility, 2) Providing assistance in ensuring compliance with intent of design and specification to avoid construction delays, 3) Participating in the construction design process to obtain consensus of completed facility design; AND 4) Engaging in communication (written and oral) with customers and project delivery teams.
This definition of specialized experience is typical of work performed at the next lower grade/level position in the federal service (GS-09).
OR
Combination of Education and Experience: A combination of education and experience may be used to qualify for this position as long as the computed percentage of the requirements is at least 100%. To compute the percentage of the requirements, divide your total months of experience by 12. Then divide the total number of completed graduate semester hours (or equivalent) beyond the second year (total graduate semester hours minus 36) by 18. Add the two percentages. (Note: You must attach a copy of your transcripts.)
GS-12Specialized Experience: One year of specialized experience which includes: 1) Life cycle project management of construction projects with extensive requirements; 2) Analyzing construction plans and specifications; 3) Interpreting contract specifications pertaining to construction phase; AND 4) Engaging in communication (written and oral) with high-ranking foreign customers/partners.
This definition of specialized experience is typical of work performed at the next lower grade/level position in the federal service (GS-11).
Education
FOREIGN EDUCATION: If you are using education completed in foreign colleges or universities to meet the qualification requirements, you must show the education credentials have been evaluated by a private organization that specializes in interpretation of foreign education programs and such education has been deemed equivalent to that gained in an accredited U.S. education program; or full credit has been given for the courses at a U.S. accredited college or university. For further information, visit:
https://sites.ed.gov/international/recognition-of-foreign-qualifications/
Contacts
- Address RB-W31R30 US ARMY ENG DIV TAD MID EAST DIST
DO NOT MAIL
Winchester, VA 22604
US
- Name: Army Applicant Help Desk
Map