THIS IS A NATIONAL GUARD TITLE 32 EXCEPTED SERVICE POSITION. This National Guard position is for a TARGET SYSTEMS REPAIRER (Title 32), Position Description Number D2709000 and is part of the OK Camp Gruber Training Center, Oklahoma Army National Guard.

Duties

Installs, removes, maintains, modifies, troubleshoots, and repairs voice and/or nonvoice communications systems including intercom equipment; electronic systems; terminal communications equipment; modem; fiber-optic end equipment; T1-carriers, and line drivers. Reviews work orders and layout sheets to select equipment and circuits required. Installs equipment such as backboards, relay racks, central processor units, trunk cards, line cards, and station cards to provide the desired number of lines and stations. Follows or refers to layout sheets, circuit schematics and descriptions, and manufacturer's technical guidance. Analyzes system failures and other unusual system occurrences to isolate the source of the problem and determine whether the failure is caused by software, hardware, or other factors. Installs thermal target equipment to include, but not limited to, AC or DC powered thermal heating panels. Tests and troubleshoots thermal target panels, using digital multi-meter equipped with a thermal probe. Operates and maintains laser interface devices designed to be used in conjunction with existing target systems employed on ranges. Fabricates and repairs electrical power/data cables, hit sensor assemblies and hard-wire target control power distribution/switch devices. Fabricates and/or repairs wood, plastic, and cardboard targets. Performs routine flatwork welding repair to metal mechanical target mounting devices. Uses an oxygen/acetylene welder to heat-treat and straighten target-mounting arms, cut repair splices, and join metal surfaces to repair live fire damage. Follows standard measurements and specifications; uses templates or precut materials when fabricating and/or repairing metal, wood, three-dimensional and cardboard targets. Installs targets on various devices including M31A1, M64, ERETS, THMTG and AMTC. Installs and recharges batteries and maintains charging equipment. Hooks up battery charging systems, inspects batteries for serviceability and ensures proper operation of battery charging equipment. Develops training scenarios for down range target systems, using the computer controlled integrated target systems control panel. Monitors control panel for correct operation, report, and corrects malfunctions. Isolates faulty components and determines extent of repair or replacement required to restore power, signal, or correct mechanical operation. Repairs or replaces exposed, broken, cut or damage cables. Removes, replaces, and adjusts damage or inoperable target system components. Forwards items requiring repair beyond the organizational level to support facilities for repair or replacement. Makes necessary adjustments (mechanical) to integrated target systems to ensure proper integration and correct operation of the entire target system. Operates and performs operational and organization maintenance on gasoline and/or diesel-powered generating systems and various portable power sources used in support of range control and target systems. Uses technical manuals, testing and repair equipment such as digital multi-meter, voltmeters, pressure gauges and common mechanic's hand tools daily. Determines cause(s) of malfunctions, isolates faulty components, and determines extent of repair or replacement required. Inspects and tests Army Standard Integrated Target Systems, using wiring diagrams, schematics, technical manuals, and test equipment (i.e., voltmeters, multiplexers, miniature consoles, and digital multi-meters). Visually examines systems and systems components to identify and troubleshoot causes of malfunctions. Uses a multiplexer's simulator to trouble shoot during the testing of computer consoles and console communication lines. Determines if causes of malfunctions are electrical (i.e., AC/DC, power outage, and incorrect voltage), electronic (signal), mechanical, or hydraulic. Prepares demolitions in conjunction with radio and/or computer-controlled target system mechanisms. Places electrically fired blasting caps or explosive charges, such as hand grenade simulators and flash artillery simulators for use in training exercises. Command detonates explosives during live fire exercises. Ensures range personnel and students observe explosive safety procedures. Operates and maintains wheeled vehicles assigned to the shop. Ensures before, during, and after operational checks are performed and required logbook information is completed after each use of a vehicle. Performs preventive maintenance operations, such as checking vehicle fluid levels and monitoring vehicles for any unusual noises, which may require taking the vehicle to the training site's vehicle maintenance depot for repairs. Operates and maintains equipment used for such purposes as berm repair and maintenance, grass cutting, snow removal, or otherwise maintaining the range area to keep ranges operational to the maximum extent possible on a year-round basis. May be required to perform range maintenance duties on other ranges.

Requirements

• This is an excepted service position that requires membership in a compatible military assignment in the employing state's National Guard, required prior to the effective date of placement.
• Selectee will be required to wear the military uniform.
• Acceptance of an excepted service position constitutes concurrence with these requirements as a condition of employment.
• Males born after 31 December 1959 must be registered for Selective Service.
• Federal employment suitability as determined by a background investigation.
• May be required to successfully complete a probationary period.
• Participation in direct deposit is mandatory.
• This is an Army National Guard dual status technician position which requires military membership.
• Must be able to obtain and maintain the appropriate security clearance of the position.
• Irregular and/or overtime (compensatory) hours may be required to support operational requirements or contingencies or may be required to work hours outside of the normal duty day.
• Ability to establish effective professional working relationships with coworkers and customers, contributing to a cooperative working environment and successful accomplishment of the mission.
• This position is covered by the Domestic Violence Misdemeanor Amendment (30 Sep 96) of the Gun Control Act (Lautenberg Amendment) of 1968. An individual convicted of a qualifying crime of domestic violence may not perform the duties of this position.
• The duties and responsibilities of your job may significantly impact the environment.
• You are responsible to maintain awareness of your environmental responsibilities as dictated by legal and regulatory requirements, your organization, and its changing mission.

Qualifications

Military Grades: E-1 Through E-6 GENERAL EXPERIENCE: Experience or training which demonstrates the ability to use and maintain electronic and electrical equipment, components, and ability to perform repairs and testing. Candidates must have knowledge of standard troubleshooting techniques in order to troubleshoot for common recurring kinds of defects. SPECIALIZED EXPERIENCE: Experience or training demonstrating knowledge of electronics, test equipment, measuring devices, and equipment used to assemble, disassemble, clean, replace, or adjust target systems and control panels. Candidates must be proficient in reading and interpreting technical manuals, specifications, and wiring diagrams to aid in minor troubleshooting and repairs of defected equipment.

Education

There is no substitution of education for specialized experience for this position.

Contacts

• Address OK Camp Gruber Training Center 6000 HWY 10 Braggs, OK 74423 US
• Name: Rachel Surine
• Phone: 405-228-5575
• Email: [email protected]