About the Position: Serve as an Environmental Engineer in the section for all environmental engineering aspects of the District's Hazardous, Toxic and Radiological Waste (HTRW) and National Pollution Discharge Elimination System (NPDES) Permit Compliance programs in primarily a four western state area.

Duties

This is a developmental position. The duties of this position lead to the full performance level of GS-0819-12. Provide environmental engineering input to scopes of work (SOW) and provide technical support for review and evaluation of environmental engineering functions performed by HTRW contractors. Examine data from field exploration program or monitoring data from lakes and reservoirs, as well as active storage, disposal or treatment facilities. Establish and maintains close contact with regulating agencies to ensure all investigation and design actions are in accordance with applicable regulations. Develop and maintain environmental databases for assigned projects. Prepare environmental engineering portions of studies (e.g., preliminary assessments/site investigation, inventory project report, remedial investigation/feasibility study, etc.). Ensure specialized field monitoring/sensing equipment (e.g., air stations and surface/subsurface water samplers) are functioning properly and are performing desired functions. Typically centered around these programs: Environmental Protection Agency's (EPA's) National Superfund program; Department of Defense's (DOD's) Defense Environmental Restoration Account (DERA) program; Army Installation Restoration Program (IRP); Construction site Storm Water General Permit and/or other Discharge Permit compliance; District Reservoir and Dredging Operations Projects; and support for various environmental engineering aspects of other civil and military projects.

Requirements

• Appointment may be subject to a suitability or fitness determination, as determined by a completed background investigation.
• Must obtain and maintain a valid state issued driver's license.
• Requires work outside the office involving exposure to varying weather conditions, walking over rough, uneven surfaces, climbing, stooping, bending, and entering confined spaces, requiring use of hard hats and appropriate safety gear.
• Incumbent is required to know, comply with, and promote prescribed safety rules and regulations.
• Routine and special medical examinations are required because of potential exposure and the significant physical stress factors that occur while wearing protective equipment.
• Ability to obtain certification to handle hazardous and toxic wastes.

Qualifications

Applicants will be referred periodically throughout the open period. Final application disposition will be completed once all positions have been filled or the announcement reaches the end of the open period as stated above. Applications will expire 90 days after submission. To remain eligible for consideration, reapplying is required every 90 days. Who May Apply: US Citizens In order to qualify, you must meet the education AND/OR experience requirements described below. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social). You will receive credit for all qualifying experience, including volunteer experience. Your resume must clearly describe your relevant experience; if qualifying based on education, your transcripts will be required as part of your application. Additional information about transcripts is in this document. Basic Requirement for Engineering: A. Degree: Bachelor's degree (or higher degree) in engineering. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher degree) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); OR (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. OR B. Combination of Education and Experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following: 1. Professional registration or licensure - Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions. 2. Written Test - Evidence of having successfully passed the Fundamentals of Engineering (FE) examination, or any other written test required for professional registration, by an engineering licensure board in the various States, the District of Columbia, Guam, or Puerto Rico. 3. Specified academic courses - Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in A above. The courses must be fully acceptable toward meeting the requirements of an engineering program. 4. Related curriculum - Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. In addition to meeting the basic requirement above, to qualify for this position you must also meet the qualification requirements listed below: Minimum Qualifications for the GS-11: Specialized Experience: One year of specialized experience which includes applying environmental engineering principles, methods, and techniques required for the closure of historic hazardous waste sites, and for the mitigation of liquid or solid sanitary, toxic, or hazardous waste. This definition of specialized experience is typical of work performed at the second lower grade/level position in the federal service (GS-09). OR Education: Ph.D. or equivalent doctoral degree or 3 full years of progressively higher level graduate education leading to such a degree in a field which demonstrates the knowledge, skills, and abilities necessary to do the work of the position, such as: engineering, architecture or related fields. OR Combination of Education and Experience: A combination of education and experience may be used to qualify for this position as long as the computed percentage of the requirements is at least 100%. To compute the percentage of the requirements, divide your total months of experience by 12. Then divide the total number of completed graduate semester hours (or equivalent) beyond the second year (total graduate semester hours minus 36) by 18. Add the two percentages. Minimum Qualifications for the GS-12: Specialized Experience: One year of specialized experience which includes applying knowledge of environmental laws and regulations towards design and construction, water quality monitoring, and environmental restoration to ensure environmental requirements and concerns are addressed. This definition of specialized experience is typical of work performed at the second lower grade/level position in the federal service (GS-11). Some federal jobs allow you to substitute your education for the required experience in order to qualify. For this job, you must meet the qualification requirement using experience alone--no substitution of education for experience is permitted at the GS-12 level.

Education

FOREIGN EDUCATION: If you are using education completed in foreign colleges or universities to meet the qualification requirements, you must show the education credentials have been evaluated by a private organization that specializes in interpretation of foreign education programs and such education has been deemed equivalent to that gained in an accredited U.S. education program; or full credit has been given for the courses at a U.S. accredited college or university. For further information, visit: https://sites.ed.gov/international/recognition-of-foreign-qualifications/.

Contacts

• Address RI-W07502 US ARMY ENGINEER DISTRICT-SACRAMENTO DO NOT MAIL Sacramento, CA 95814 US
• Name: Army Applicant Help Desk