About the Position: This Supervisory Electronics Engineer position is assigned to the Program Executive Office, Command Control Communications-Tactical (PEO C3T), PMO Tactical Network, Technical Management Div, located in APG, MD. This is a DoD Civilian Acquisition Workforce Personnel Demonstration Project (AcqDemo) position in the NH-04 broadband with an advertised pay range from the lowest equivalent GS grade 14 Step 1 to the highest equivalent GS 15 grade step 10 in the broadband.

Duties

The incumbent applies knowledge of the physical sciences and mathematics, electronic phenomena, and the principles, techniques and practice of electronics engineering. Exercises managerial and decision authority for either systems or technical engineering and logistical developments. Exercises clear, creative leadership and outstanding managerial competence that exercises the direct authoritative participation, as an engineer, in organizing and controlling the technical efforts in the major field of electronics engineer. Interfaces with external stakeholders such as representatives from OSD, Joint Staff, HQDA, TRADOC, ASA(ALT), PEO Staff, and other commands and agencies, and private industry on all matters effecting program execution. Has full authority of PEO/PM when dealing with both higher and lower echelon organizations in area of expertise.

Requirements

• Appointment may be subject to a suitability or fitness determination, as determined by a completed background investigation.
• Male applicants born after December 31, 1959, must complete a Pre-Employment Certification Statement for Selective Service Registration.
• One year trial/probationary period may be required.
• You will be required to provide proof of U.S. Citizenship.
• This is an Army Acquisition, Logistics and Technology Workforce position.
• Selectees must meet position requirements for certification at the Practitioner level in the Acquisition Career Field Engineering and Technical Management within 60 months of entrance on duty.
• The duties of this position require submission of, on an annual basis, OGE 450, Confidential Financial Disclosure Report.
• Business travel required up to 50% of the time.
• This position requires the incumbent be able to obtain and maintain a determination of eligibility for a Top Secret security clearance or access for the duration of employment.
• This position is a Critical Acquisition Position Key Leadership position and requires a 3-year tenure agreement. Selectee must sign DD Form 2889 and execute, as a condition of employment, a written tenure agreement.
• This position requires the incumbent to possess 4 years of Acquisition experience.
• One year supervisory probation period may be required.
• This position is subject to a pre-employment screening, and random testing thereafter, to include testing based on reasonable suspicion and testing due to direct involvement with an on-duty accident.

Qualifications

Who May Apply: Only applicants who meet one of the employment authority categories below are eligible to apply for this job. You will be asked to identify which category or categories you meet, and to provide documents which prove you meet the category or categories you selected. See Proof of Eligibility for an extensive list of document requirements for all employment authorities. Current Department of Army Civilian EmployeesDomestic Defense Industrial Base/Major Range and Test Facilities Base Civilian Personnel WorkforceInteragency Career Transition Assistance PlanLand Management Workforce Flexibility ActMilitary Spouses, under Executive Order (E.O.) 13473Priority Placement Program, DoD Military Reserve (MR) and National Guard (NG) Technician EligiblePriority Placement Program, DoD Military Spouse Preference (MSP) EligiblePriority Placement Program, DoD MR and NG Preference Eligible Tech Receiving Disability RetirementPriority Placement Program, DoD Retained Grade Preference EligibleVeterans Employment Opportunity Act (VEOA) of 1998 In order to qualify, you must meet the education and experience requirements described below. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social). You will receive credit for all qualifying experience, including volunteer experience. Your resume must clearly describe your relevant experience; if qualifying based on education, your transcripts will be required as part of your application. Additional information about transcripts is in this document. To qualify based on your experience, your resume must describe at least one year of experience which prepared you to do the work in this job. Specialized Experience: One year of specialized experience is defined as: 1) Perform as an engineer working the integration across several communication systems; 2) Serve in a leader capacity within an organization providing engineering support to the organization's acquisition program office; and, 3) Represent organization at conferences and meetings on the topic of command, control, communications-tactical technologies. This definition of specialized experience is typical of work performed at the next lower grade/level position in the federal service (NH-03)/GS-13. In addition to the experience the incumbent must meet the below Educational Requirement for 0800 Series: Bachelor's degree (or higher degree) in engineering. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher degree) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET);OR(2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. (Note: You must attach a copy of your transcripts.) OR Combination of education and experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. I am currently registered as an Engineer Intern (EI), Engineer in Training (EIT), or licensed as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions. (Note: You must attach a copy of your transcripts.) OR Combination of education and experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. I have successfully passed the Fundamentals of Engineering (FE) examination, or any other written test required for professional registration, by an engineering licensure board in the various States, the District of Columbia, Guam, or Puerto Rico. (Note: You must attach a copy of your transcripts.) OR Combination of education and experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. I have successfully completed at least 60 semester hours or 90 quarter hours of courses in the physical, mathematical, and engineering sciences that included the courses specified in A above. The courses must be fully acceptable toward meeting the requirements of an engineering program. (Note: You must attach a copy of your transcripts.) OR Combination of education and experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. I have successfully completed a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, and have at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all-inclusive.) (Note: You must attach a copy of your transcripts.) You will be evaluated on the basis of your level of competency in the following areas: CommunicationsElectronics EngineeringLeadershipProject Management

Education

Some federal jobs allow you to substitute your education for the required experience in order to qualify. For this job, you must meet the qualification requirement using experience alone--no substitution of education for experience is permitted.

FOREIGN EDUCATION: If you are using education completed in foreign colleges or universities to meet the qualification requirements, you must show the education credentials have been evaluated by a private organization that specializes in interpretation of foreign education programs and such education has been deemed equivalent to that gained in an accredited U.S. education program; or full credit has been given for the courses at a U.S. accredited college or university. For further information, visit: https://sites.ed.gov/international/recognition-of-foreign-qualifications/.

Contacts

• Address AD-W6DRAA PEO C3T DO NOT MAIL Aberdeen Proving Ground, MD 21005 US
• Name: Army Applicant Help Desk