This is a public notice flyer to notify interested applicants of anticipated vacancies. Applications will not be accepted through this flyer. Interested applicants must follow the directions in the "How to Apply" section of this flyer to be considered. There may or may not be actual vacancies filled from this flyer. Notice of Result letters will not be sent to applicants who respond to this flyer.

Duties

You will provide Journeyman level services to prepare, prime, paint, color code and stencil component parts or end items for rebuild or shipment with organic or inorganic material by using standard methods and techniques. You will assure compliance with all safety requirements. You will adjust the spray gun (airflow, fan, fluid, etc) to ensure paint is properly applied to prevent drips, runs, blisters, etc. You will clean and lubricate spray guns to ensure spray guns will perform satisfactory during shifts, as well as flush and clean paint pots and lines when changing paint or at end of shift. You will adjust paint pots. You will flush and clean paint pots and lines when changing paint or at end of shift.

Requirements

• Must be a US Citizen.
• Must be determined suitable for federal employment.
• Must participate in the direct deposit pay program.
• New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov
• Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.
• Males born after 12-31-59 must be registered for Selective Service.
• You will be required to obtain and maintain an interim and/or final Confidential security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.
• Must be able to successfully pass the written and practical portions of the STAR4D certification test.
• This position requires you to be certified in the use of a respirator. You must possess and maintain respirator certification.
• You will be required to successfully complete a pre-appointment physical examination.
• You will be required to lift 40 to 50 pounds as necessary and occasionally, with assistance, lift up to 100 pounds.
• You will be required to wear proper personal protective equipment (PPE).
• This position may require you to work under adverse environmental conditions.
• This position may require you to work and be certified to work in confined spaces.
• This position is subject to work an uncommon tour, including overtime, shift, nights, weekends, and holidays to meet mission requirements. Overtime or night differential pay and/or unusual duty hours may be required.
• This is a bargaining unit position.

Qualifications

Although a specific length of time and experience is not required for most trade and labor occupations, you must show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on quality of experience, not necessarily the length of time. Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the job elements and screen out listed below. This job has a screen-out element which will be used to determine minimum eligibility for this job. Applicants who do not receive a minimum of two points on the screen-out element(s) will be found ineligible. The Screen-out Element for this position is: ABILITY TO DO THE WORK OF THE POSITION WITHOUT MORE THAN NORMAL SUPERVISION IN: Full range of painting, surface preparation, blending and matching paints, and coating of various surfaces requiring fine finishes and decorative effects. Surface preparation; Blending and matching paints; Adjustment, cleaning and lubrication of spray guns; AND Adjustment, flushing and cleaning of paint pots. Adjustment of spray guns to ensure paint is properly applied to prevent drip, runs, and blisters; Cleaning and lubrication of spray guns; AND Adjustment, flushing and cleaning of paint pots. Applicants must meet the requirements of the Office of Personnel Management (OPM) Job Qualification Handbook for Trades and Labor Occupations. Additional qualification information can be found at: https://www.opm.gov/policy-data-oversight/classification-qualifications/federal-wage-system-qualifications/#WG-4100 https://www.opm.gov/policy-data-oversight/classification-qualifications/federal-wage-system-qualifications/#url=Overview

Education

This job does not have an education qualification requirement.

Contacts

• Address MAINTENANCE CENTER ALBANY 814 Radford Boulevard Albany, GA 31704 US
• Name: Darrick Calvin
• Email: [email protected]