This is a public notice flyer to notify interested applicants of anticipated vacancies. Applications will not be accepted through this flyer. Interested applicants must follow the directions in the "How to Apply" section of this flyer to be considered. There may or may not be actual vacancies filled from this flyer. Notice of Result letters will not be sent to applicants who respond to this flyer.

Duties

You will function as a Supervisory Engineer or Architect in the field of construction engineering, serving as one of the primary points of contact and team leader for coordination of assigned Capital Improvements construction projects. You will apply Federal and agency regulations governing administration of construction contracts, serve as technical advisor on complex engineering problems, and assist in the development of independent government estimates for construction. You will be responsible for assisting in the forecasting of workload into out years in preparation of resource planning requests for your assigned branch. You will provide resolution of highly technical issues, construction practices, processes, safety, and changed conditions. You will ensure preconstruction conferences are conducted, constructability reviews are performed, submittals including contractor schedules are reviewed, approved and monitored, and invoicing is conducted and processed in a timely fashion. You will supervise a technical staff, assign considering the difficulty and requirements, identify training needs, evaluate performance and resolve complaints.

Requirements

• Must be a US Citizen.
• Must be determined suitable for federal employment.
• Must participate in the direct deposit pay program.
• New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov
• Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.
• Males born after 12-31-59 must be registered for Selective Service.
• You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.
• You will be required to obtain and maintain a current valid United States driver’s license.
• This position is covered under the Defense Acquisition Workforce Improvement Act (DAWIA). Certification in the Acquisition Functional Area and category assigned to the position is required within established category timeframes.
• Supervisors in the executive branch have a heightened personal responsibility for advancing government ethics. You will be required to review the 14 General Principles of Ethical Conduct at 5 CFR 2635.101.
• The incumbent may be required to work overtime.

Qualifications

This position has a Special Placement Factor which is current registration as a Professional Engineer (PE) or Architect (RA) in any state, District of Columbia, Guam or Puerto Rico. Your resume must also demonstrate at least one year of specialized experience at or equivalent to the GS-12 grade level or pay band in the Federal service or equivalent experience in the private or public sector. Specialized experience must demonstrate the following: 1) Serving as a senior member/lead and/or supervisor of a team of engineers/architects and technicians performing a full range of multidisciplinary engineering responsibilities related to military construction (MILCON) and construction quality assurance; 2) Research construction practices and techniques in the development of construction project specifications or feasibility considerations; 3) Establishing and monitoring site and project specific procedures and submission of reports aimed at expediting the work of A/E and construction contractors: 4) Assisting in and/or seeking out solutions to problems involving the areas of all disciplines of engineering and project financing which are the result of design errors, unforeseen conditions, or changes in criteria; and 5) Visiting construction projects under execution to evaluate construction progress and safe performance of contracted work. Additional qualification information can be found from the following Office of Personnel Management website: https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/#url=GS-PROF AND https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/0800/files/all-professional-engineering-positions-0800.pdf https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/0800/general-engineering-series-0801/ https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/0800/architecture-series-0808/ Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. Physical Demands: The work is generally sedentary with regular site visits involving standing, walking, climbing, bending and crawling to assess or inspect existing and new facilities and generally traversing construction sites. Occasional surveys and inspections of the supporting Installation's infrastructure will require some physical exertion (for example, crawlspace inspections, above and below deck pier evaluations, etc.). Work Environment: Work generally involves minimal risks and observance of safety precautions typical of an office setting. However, field inspections are made which may require protective clothing. Protective clothing worn in field inspections includes hard hats, reflective vest, hard-toed boots, safety glasses, and ear protection. Other protective wear such as safety harnesses, coveralls, and gloves may be required for certain situations. The incumbent may be assigned to work in areas where certain potentially harmful physical and chemical agents are present. These agents may include but are not limited to: fumes, dust, noise, heat, ionizing and non-ionizing radiation, chemicals, etc. To ensure employee safety and health, NAVFAC FECs maintain personnel protection programs with applicable laws and regulations. These programs may include protective equipment, and laws and medical surveillance.

Education

Series 0801 Engineer
Applicants for the Professional Engineering Series must meet the following basic education requirements of the Office of Personnel Management (OPM) Qualifications Standards Manual:

Successful completion of a professional engineering degree. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.
OR
Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration For more information about EI and EIT registration requirements, please visit the National Society of Professional Engineers website at: http://www.nspe.org
OR
Evidence of having successfully passed the Fundamentals of Engineering (FE) examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico The FE examination is not administered by the U. S. Office of Personnel Management. For more information, please visit: http://www.nspe.org/Licensure/HowtoGetLicensed/index.html.
OR
Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and in engineering that included the courses specified in the basic requirements under paragraph A (above). The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A (above)
OR
Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least one year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily, there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions.

Series 0808 Architect
Applicants for the Professional Architecture Series must meet the following basic education requirements of the Office of Personnel Management (OPM) Qualifications Standards Manual:

Successful completion of a bachelor's or higher degree in architecture.
OR
Successful completion of a bachelor's or higher degree in a field related to architecture that included 60 semester hours of course work in architecture or related disciplines of which at least (1) 30 semester hours were in architectural design, and (2) 6 semester hours were in each of the following: structural technology, properties of materials and methods of construction, and environmental control systems.
OR
Have a combination of college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the arts and sciences underlying professional architecture, and (2) a good understanding, both theoretical and practical, of the architectural principles, methods, and techniques and their applications to the design and construction or improvement of buildings. The curriculum for a degree is in either architecture or architectural engineering and covers function, esthetics, site, structure, economics, mechanical-electrical, and other engineering problems related to the design and construction of buildings primarily (but not exclusively) intended to house human activities OR you lack a degree in architecture, but have 1 year of experience in an architect's office or in architectural work for each year short of graduation from a program of study in architecture that demonstrates that you have acquired a thorough knowledge of the fundamental principles and theories of professional architecture. (Note - In the absence of college courses, 5 years of such experience is required).

Contacts

• Address NAVAL FAC ENGINEERING CMD WASH 1001 North St SE 208 Washington, DC 20020 US
• Name: NAVFAC Washington Human Resources Office
• Phone: (202) 685-0616
• Email: [email protected]