Opened Area(s) of Consideration: 1, 2, 3 DEFINITION OF AREA(S) OF CONSIDERATION: Area 1 - AKNG Permanent or Indefinite technicians. Area 2 - All AKNG members. Area 3 - All other current military members who are eligible to join the Alaska Air National Guard. PDCN: D1635000 MPCN: 874785 Selecting Supervisor: James Saling

Duties

Troubleshoots malfunctioning engines and interrelated propulsion system components, determines degree of disassembly or certification required, repairs or replaces defective components, diagnostic computers and associated hardware. Analyzes malfunctions using schematic and wiring diagrams, blueprints, manufacturer's specifications, computer diagnostics data, inspection findings, trending data and aircrew debriefs. Performs engine run operation on installed and uninstalled engines to troubleshoot malfunctions or verify findings. Removes and installs engines and auxiliary power units. Operates, Automated Ground Test Systems (AGETS), trouble-shoots and repairs aircraft jet engines. Troubleshoots, modifies, repairs, and performs sequential disassembly and assembly of gearboxes and auxiliary power units. Performs evaluations that must be accomplished at critical points in the repair/build-up process using a variety of quality characteristics, consisting of complete systems or components and assemblies that undergo many steps in a repair process and have highly critical tolerances. Performs test cell operation of engine and aircraft run up, analyzes operating parameters, makes final adjustments and verifies that engine is operating within acceptable parameters for safe operation in the aircraft. Performs scheduled and special evaluations on installed engines, auxiliary power units, and associated airframe-mounted systems. Interprets Engine Management trend data and investigates trend anomalies to eliminate catastrophic engine failure or damage by the prediction and detection of adverse trends towards known failure modes before they occur. Performs command directed and locally established in-progress inspections (IPI) (certifying acceptable performance of all conventional or modified aircraft engines prior to their being installed in the aircraft or placed in inventory) of propulsion system components and associated equipment to determine adequacy of workmanship, materials and maintenance. Makes final certification of completed work and critical engine build measurements, annotating by signature that work and tolerances are correct. Certifies aircraft is safe for flight by Clearing Red X and other Red symbols. Requisitions, processes, and accounts for supply assets as required by the repairable processing system. Verifies compatibility of engine components. Performs computer data entry of engine and component information such as component location, status and tracking information into the Core Automated Maintenance System (CAMS) for fighter aircraft, and G081, (CAMS for Mobility) for multi-engine transport aircraft. Uses computer-based systems to account for time expenditures of maintenance performed. Provides technical advice and troubleshooting expertise to other work centers when propulsion systems affect or are affected by interrelated aircraft systems, such as: electro-environmental, pneudraulic, fuel and avionics systems. Provides on-the-job training to lower graded personnel or newly assigned personnel regardless of grade. Trains lower graded employees on proper certification techniques of installed engine components. Provides instruction in repair and inspection techniques of aircraft engine components and related equipment. Examines recurring malfunctions and initiates corrective actions by submission of quality deficiency or software deficiency reports. Devises repair procedures based on findings and recommends program changes or data corrections to correct software or technical data deficiencies. Recommends revisions to intermediate maintenance directives when necessary. Serves as the hazardous materials manager as required. Interprets and follows state and federal regulations regarding the reclamation, storage and transportation of hazardous materials. Prepares for and participates in various types of readiness evaluations such as Operational Readiness Inspections (ORI), Inspector General (IG) Inspections, Unit Effectiveness Inspections and mobility and command support exercises. Performs additional duties such as, hydrazine response, aircraft or equipment decontamination, structural fire fighting, fire/crash/rescue duty, security guard, snow removal, munitions loading and handling, heavy equipment operator, maintenance of facilities and equipment, and assists local authorities during natural disasters or civil emergencies. Performs other duties as assigned.

Requirements

• Alaska Air National Guard membership is required.
• Males born after 31 December 1959 must be registered for Selective Service.
• Federal employment suitability as determined by a background investigation.
• May be required to successfully complete a probationary period.
• U.S. Citizenship and Secret Clearance is required.
• Bargaining Unit: Bargaining
• APPOINTMENT FACTORS: Excepted/Enlisted in the Alaska Air National Guard.
• MILITARY GRADE REQUIREMENT: Due to the nature of this position, the minimum military grade is Airman Basic (AB/E1) and the maximum military grade is Staff Sergeant (SSgt/E5).
• Incumbent is subject to termination due to loss or reduction in funding for this position.
• DESIRABLES: Possesses C-17 experience.

Qualifications

GENERAL EXPERIENCE is experience or training that has provided the ability to perform assembly and disassembly operations and make prescribed modifications to aircraft engines, engine assemblies, and accessories in accordance with technical specifications, procedures, and requirements. Experience using hand and power tools common to the trade. SPECIALIZED EXPERIENCE is experience which is directly related to the position to be filled and which has equipped you with the particular knowledge, skills and abilities to successfully perform the duties of this position. WG-10 - Must have at least 18 months of experience or training performing standard, routine assembly and disassembly operations and making prescribed modifications to aircraft engines, engine assemblies, and accessories. Experience or training performing maintenance overhaul, troubleshooting, testing, and repair of aircraft engines, engine components, and powertrains for fixed and/or rotary wing aircraft. Experience determining maintenance needed from work orders, inspection reports, historical records, and diagnosis. EXPERIENCE REQUIREMENTS: Resume must have complete dates and hours worked per week for each occurrence of both civilian and military employment (Example: 2 JAN 1980 to 3 MAR 1981; 0800-1630 M-F or JAN 1980 to MAR 1981; 40 hrs/wk) Use of year only will result in disqualification. The duties listed must fully substantiate -in your own words- that you meet the minimum requirements and specialized experience listed above, in detail; otherwise, you will not be considered qualified for this position. Length of time is not of itself qualifying. Your experience will be evaluated on the basis of duties performed. Your record of experience and/or training must show possession of the following knowledge, skills and abilities needed to fully perform the duties of the position: Knowledge in installing, removing, operating, and repairing a variety of conventional and modified aircraft engines and engine accessories systems on and off the aircraft. Knowledge and understanding of jet engine theory and the integration of the jet engine with all aircraft systems to troubleshoot malfunctions and accomplish repairs. Knowledge and skill to operate a variety of test equipment, such as vibration analyzers, air data simulators, engine monitoring computer, data transfer equipment, dynamic propeller balancing equipment, high pressure hydraulic test equipment, voltmeters and other precision measurement equipment to troubleshoot, maintain, and repair aircraft engines on and off the aircraft. Skill and ability to interpret technical orders, manufacturer's catalogs, blueprints and schematic drawings, to obtain the technical information required to troubleshoot, overhaul, repair, modify, assemble and trim engines. Knowledgeable in understanding and applying technical order data, principles and practices to verify that essential quality requirements have been met, identify problem areas and recommend corrective action. Knowledgeable in understanding and interpreting engine trending data, to determine defects and failure rates on installed engines. Skill and knowledge to certify work in progress (IPIs) and upon completion, compare to required tolerances and specifications as identified in Technical Orders (TO)'s. Knowledge and understanding of mathematics to determine tolerances and performance specifications involved in engine buildup and test cell operations.

Contacts

• Address Alaska Air National Guard P.O Box 5800 JBER, AK 99505 US
• Name: Lester Nathaniel Tuazon
• Phone: 907-428-6351
• Email: [email protected]