This position is in the Design Branch of Western Federal Lands Highway Division. Supports the Division as a senior designer with responsibility for the development of plans, specifications, and estimates (PS&E) packages for the most complex, advanced projects relative to the design of highways and bridges. Projects occur primarily on Federal Lands managed by other Federal agencies (e.g., National Park Service & U.S. Forest Service) & include multi-state areas.

Duties

As a Civil Engineer (Highway) Design, you will:

Requirements

• You must be a U.S. citizen & meet specialized experience to qualify
• Submit application and resume online by 11:59 PM EST on the closing date
• Required documents must be submitted by the closing date.
• Direct Hire Authority will be used to fill this position

Qualifications

To determine which grade(s) you may be eligible for, review the following grade specific details.  You will be asked a few questions as part of your application but make sure to verify how you meet this experience in your resume, or you may be deemed ineligible.   For the GS-11: On Experience, you must have at least one year of specialized experience, equal or equivalent to the GS-09 grade level, which included: Experience providing engineering design services, on a team, in the development of highway improvement projects to reconstruct or rehabilitate highways or local roads (e.g., developing Plans, Specifications, and Estimates (PS&E) packages and layout drawings for highway designs); AND Experience using highway-design software programs, including Computer-Aided Design (CADD) software and engineer's estimating software. Or on Education, you must have 3 years of progressively higher-level graduate education leading to a Ph.D. degree OR Ph.D. or equivalent doctoral degree. You can also have a combination of graduate education and experience.  This must be fully supported by your resume and transcripts, provided with your application. For the GS-12: On Experience, you must have at least one year of specialized experience, equal or equivalent to the GS-11 grade level, which included: Experience providing engineering design services, construction support, and technical assistance in the development of highway improvement projects (e.g., developing Plans, Specifications & Estimates (PS&E) packages and layout drawings for projects involving interstate, primary, urban, or Federal Lands' roads and highways; reviewing contractor submittals; resolving construction issues; or addressing exceptions to design standards); AND Experience using highway-design software programs, including Computer-Aided Design (CADD) software and engineer's estimating software. Although you must first meet the mandatory education requirement, you cannot qualify for the GS-12 grade based on education, you must meet the specialized experience, which is cited above. KNOWLEDGE, SKILLS AND ABILITIES (KSAs): Your qualifications will also be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the following areas: Civil Engineering- Knowledge of the concepts, principles, theories, and methods required to plan, design, construct, operate, and maintain facilities such as buildings, transportation systems, water and sanitary systems, and other public works systems. Transportation Engineering- Knowledge of the concepts, principles, theories, and methods applicable to planning, designing, and constructing of transportation systems including traffic analysis, signal analysis, highway capacity, pavement design, bridge construction, planning of transportation projects, environmental analysis of transportation facilities, and transportation network analysis. Oral Communication- Make clear and convincing oral presentations. Listens effectively; clarifies information as needed. Written Communication- Write in a clear, concise, organized, and convincing manner for the intended audience. For all types of consideration, experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community, student, social).  Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment.  You will receive credit for all qualifying experience, including volunteer experience. Students enrolled in a qualifying degree program can apply to the GS-11 grade based on education if the anticipated graduation date is within six months of the closing date of this announcement. If selected, the final transcript must be received before your start date. Other applicants must meet all qualification requirements by the closing date of this announcement.

Education

To meet the basic qualifications for this position, you must (1) meet the Mandatory Education Requirement for the series, AND (2) provide a copy of your transcripts or other applicable documentation for verification and (3) meet the specialized experience requirements for each grade you are applying to. Please review the following information before proceeding with the application process: 

(1) All applicants must meet the education requirements under A or B to qualify for applying to an engineering position:

A. Degree: Engineering. To be acceptable, the program must: (1) lead to a bachelor’s degree in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); or (2) that included differential and integral calculus and courses (more advanced that first year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials; (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials; and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics;

OR

B. Combination of education or training: college level education, training and/or technical experience that has furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering.

The adequacy of such background must be demonstrated by one of the following:    

1. Professional registration or licensure - current registration as an Engineer Intern (EI), engineer in Training (EIT), or licensure as a Professional Engineer (PE).
2. Written Test - Evidence of having successfully passed the Fundamentals of Engineering (FE) examination, or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico.
3. Specified academic courses - Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences which included the courses as specified in Paragraph A above.
4. Related curriculum - Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. There should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering type experience. This must be clearly described in your resume.

For additional information, please refer to the OPM qualifications standard for GS-800: All Professional Engineering Positions qualifications at: https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/0800/files/all-professional-engineering-positions-0800.pdf.

(2) Upload the appropriate document(s) to your application for verification purposes.

(3) Specialized Experience:

Contacts

• Address DOT, FEDERAL HIGHWAY ADMINISTRATION Submit Application and Documents Online 1200 New Jersey Ave SE / HAHR - 50 Washington, District of Columbia 20590 United States
• Name: Automated Staffing Office
• Phone: 000-000-0000
• Email: [email protected]