Click on "Learn more about this agency" button below to view Eligibilities being considered and other IMPORTANT information. The primary purpose of this position is to To install, maintain, test, troubleshoot, repair, and calibrate highly complex systems of electronic sensing and control.

Duties

- Plans and lays out work from electrical and electronic block diagrams, wiring diagrams, schematics, and technical orders. - Performs pretest, operational (functional), and final testing; final tuning; alignment; and/or calibration of highly complex electronic systems, components, and/or subassemblies. - Installs, overhauls, repairs, fabricates, and/or modifies electronically controlled industrial systems, components, and/or subassemblies. - Performs preventive maintenance on electronic control systems to include disassembly, cleaning, reassembly, and calibration. - Utilizes safety and security practices and procedures following established rules and regulations and maintains a safe, clean, and secure work environment.

Requirements

• U.S. Citizenship Required
• Males must be registered for Selective Service, see www.sss.gov
• This posn is subject to provisions of the DoD Priority Placement Program
• Disclosure of Political Appointments
• The employee may be required to work other than normal duty hours, which may include evenings, weekends, and/or holidays.
• Work may occasionally require travel away from the normal duty station.
• The employee may be required to travel on military or commercial aircraft.
• Shift work may be required.
• Emergency overtime may be required.
• The work requires the employee to drive a motor vehicle. An appropriate, valid driver’s license is required for the position.
• The work may require the employee to operate (with proper training) specialized vehicles, such as motorized maintenance platforms, “High Reaches”, or other types of lifts.
• This position may require the employee to work under adverse environmental conditions. Will be required to train/guide lower grade (or other trades) military/civilian employees.
• The physical requirements of this position as determined by the manager are: Work assignments require moderate physical effort. Mechanics frequently lift, carry, or otherwise handle items weighing up to 18 kilograms (40 pounds).
• Occasionally they handle items greater than 18 kilograms. Assistance is usually available with heavy items. They work in a sitting position for extended periods.
• Frequent standing, walking, bending, crouching, reaching, and stooping is required. Occasionally, climbing and working in high places may be required.
• This position may require the employee to become certified and execute testing on cathodic protection systems.
• This is a drug testing designated position. The incumbent is subject to random testing for drug use. This position has been designated by the Air Force as a Testing Designated Position (TDP) under the Air Force Civilian Testing Program.
• Employee must pass initial and periodic short notice drug testing. Illegal drug use by employees in sensitive positions presents a clear threat to the mission of the Air Force, national security, and public safety.
• Incumbent of this position is subject to the possibility of a random drug test

Qualifications

In order to qualify, you must meet the quality level of experience requirements described in the Office of Personnel Management (OPM) Qualification Standards Handbook X-118C. QUALIFICATIONS: Applicants will be rated in accordance with the OPM Qualification Standard Handbook X-118C for the WG-2600 Electronic Equipment Installation and Maintenance Group. Although a specific length of time and experience is not required for most blue-collar positions, you must meet any screen-out element listed and show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on the quality of experience, not necessarily the length of time. The screen out element for this position is ability to do the work of a ELECTRONIC INDUSTRIAL CONTROLS MECHANIC without more than normal supervision. JOB ELEMENTS: Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the following areas: 1. Comprehensive knowledge of the operation, capabilities, and limitations of complex electronic systems complicated by a variety of multi-component assemblies and devices; knowledge of electronic theory and circuits and basic logic circuits for power, timing, and motion controls, indicating and counting mechanisms, and similar devices; knowledge of Boolean algebra to construct truth tables and logic equations for analysis of logic circuits; and knowledge of related electrical, mechanical, optical, pneumatic, and hydraulic systems. 2. Knowledge of safety, environmental, and security regulations, practices, and procedures. 3. Knowledge of regulations, procedures, and policies related to records maintenance and documentation. 4. Skill in troubleshooting electronic problems on large projects and applying test procedures; and in the use of hand and power tools of the electronics trade to include a variety of electronic, electrical, or electromechanical test and measurement equipment. 5. Ability to test, calibrate, troubleshoot, overhaul, repair, and install complete electronic systems. 6. Ability to read and interpret a variety of technical data, such as schematics, diagrams, and technical orders relating to the electronics trade Physical Effort: Work assignments require moderate physical effort. Mechanics frequently lift, carry, or otherwise handle items weighing up to 18 kilograms (40 pounds). Occasionally they handle items greater than 18 kilograms. Assistance is usually available with heavy items. They work in a sitting position for extended periods. Frequent standing, walking, bending, crouching, reaching, and stooping is required. Occasionally, climbing and working in high places may be required. Working Conditions: Work is usually performed inside in well lighted, heated, and ventilated areas. When equipment is fixed in place it is sometimes necessary to work in warehouse or industrial areas exposed to loud noises, heat or cold, fumes, etc. Mechanics are subject to injuries, such as electric shock, cuts and bruises, as well as burns caused by electrical energy or soldering irons. The mechanic may be required to work in cramped positions or in close proximity to energized or operating machinery PART-TIME OR UNPAID EXPERIENCE: Credit will be given for appropriate unpaid and or part-time work. You must clearly identify the duties and responsibilities in each position held and the total number of hours per week. VOLUNTEER WORK EXPERIENCE: Refers to paid and unpaid experience, including volunteer work done through National Service Programs (i.e., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student and social). Volunteer work helps build critical competencies, knowledge and skills that can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience.

Education

This job does not have an education qualification requirement.

Contacts

• Address Davis Monthan AFB 3515 S Fifth Street Davis Monthan AFB, AZ 85707 US
• Name: Total Force Service Center
• Phone: 1-800-525-0102
• Email: [email protected]