The primary purpose of this position is to provide continuity in the management of the installation's Civil Engineer functions. The employee serves as the Deputy Base Civil Engineer (DBCE) for the 27 Special Operations Civil Squadron, an organization of 422 authorizations, sharing with the Base Civil Engineer (BCE) the full scope of responsibility for managing the activities of the organization.

Duties

Serves as the Deputy Base Civil Engineer at an Air Force or Joint Base installation with responsibility for providing, operating, and maintaining highly complex infrastructure and facilities necessary to create and sustain responsive and effective combat operations on a global basis. Exercises supervisory personnel management responsibilities. Makes a periodic, comprehensive assessment and evaluation of program goals/objectives which provide a basis for long-range planning to enhance the organization's management support capabilities. Represents the CE Squadron with a variety of installation organizations and outside agencies.

Requirements

• U.S. Citizenship Required
• Males must be registered for Selective Service, see www.sss.gov
• If authorized, PCS will be paid IAW JTR and AF Regulations. If receiving an authorized PCS, you may be subject to completing/signing a CONUS agreement. More information on PCS requirements, may be found at: https://afciviliancareers.com/regulatory/
• This posn is subject to provisions of the DoD Priority Placement Program
• Disclosure of Political Appointments
• This is a Centrally Managed Position in the General Engineering Career Field. PCS will be paid in accordance with JTR Vol. 2 and applicable Air Force Regulations.
• Work may occasionally require travel away from the normal duty station on military or commercial aircraft.
• Employee may be required to work extended or other than normal duty hours to include evenings and weekends and may be subject to recall.
• Employee must be able to obtain and maintain a secret security clearance as a condition of employment.
• This position is designated as a key position IAW AFI 36-507. Duties of this position are essential to the accomplishment of wartime/contingency operations. (Cont’d...)
• Incumbents of key positions must be removed from their military recall status if alternatives for filling of the position during an emergency are not available.
• IAW DoDI 3020-42 this position has been locally or command designated as Mission Essential (ME); needed to ensure the continued operation of mission essential functions of the activity. (Cont’d...)
• Mission Essential personnel may be required to report for duty at normal times when the base is closed or delayed reporting, and remain on duty during phased or early release.
• This position has been designated by the Air Force as a Testing Designated Position (TDP) under the Air Force Civilian Drug Demand Reduction Program. Employee must pass initial and periodic short notice drug testing. (Cont'd...)
• Illegal drug use by employees in sensitive positions presents a clear threat to the mission of the Air Force, national security, and public safety.
• The work requires the employee to drive a motor vehicle. An appropriate, valid driver’s license is required for the position.

Qualifications

In order to qualify, you must meet the requirements described in the Office of Personnel Management (OPM) Qualification Standards for General Schedule Positions, Group Coverage Qualification Standard for Professional and Scientific Positions. BASIC REQUIREMENT OR INDIVIDUAL OCCUPATIONAL REQUIREMENT: Degree: Engineering. To be acceptable, the program must: (1) lead to a bachelor's degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. NOTE: You must submit a copy of transcripts with your application. OR Combination of education and experience -- college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following: Professional registration or licensure -- Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions. Written Test -- Evidence of having successfully passed the Fundamentals of Engineering (FE) examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico. Specified academic courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A. Related curriculum -- Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all-inclusive.) In addition to meeting the basic requirement above, to qualify for this position you must also meet the qualification requirements listed below: SPECIALIZED EXPERIENCE: Applicants must have at least one (1) year of specialized experience at the next lower grade GS-13, or equivalent in other pay systems. Examples of specialized experience includes working with the BCE, directing the mission and establishing the goals of the organization consistent with Command and AF strategic plans; exercising discretionary authority to approve allocation and distribution of funds in the Civil Engineer budget, in accordance with applicable laws; managing, integrating, and coordinating the collective efforts of a multi-disciplined staff of military, civilian, and/or contractors assigned to support programs. FEDERAL TIME-IN-GRADE (TIG) REQUIREMENT FOR GENERAL SCHEDULE (GS) POSITIONS: Merit promotion applicants must meet applicable time-in-­grade requirements to be considered eligible. One year at the GS-13 level is required to meet the time-in-grade requirements for the GS-14 level. TIG applies if you are in a current GS position or held a GS position within the previous 52 weeks. NOTE: Applicants applying as VEOA candidates who are current GS civil service employees or are prior GS civil service employees within the past 52 weeks must also meet time-in-grade requirements. KNOWLEDGE, SKILLS AND ABILITIES (KSAs): Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the following areas: Knowledge of a broad range of professional engineering concepts, principles, and practices; and extensive familiarity with architectural/engineering disciplines. Extensive knowledge of Base Civil Engineer mission, roles, functions, organizational structure, management, and operation of large organizations to provide high level staff guidance and participate in the development of goals, objectives, and policies. Thorough knowledge and understanding of the trades, professions, procedures, methods, equipment, materials, limitations, and applications involved in civil engineering activities. Knowledge of safety, security, personnel management, Military Equal Opportunity (MEO) and EEO regulations, practices, and procedures. Knowledge of government contracting regulations, practices, and procedures. Ability to plan, organize, and direct the functions and mentor, motivate, and appraise the staff of an organization directly and through subordinate supervisors. PART-TIME OR UNPAID EXPERIENCE: Credit will be given for appropriate unpaid and or part-time work. You must clearly identify the duties and responsibilities in each position held and the total number of hours per week. VOLUNTEER WORK EXPERIENCE: Refers to paid and unpaid experience, including volunteer work done through National Service Programs (i.e., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student and social). Volunteer work helps build critical competencies, knowledge and skills that can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience.

Education

IF USING EDUCATION TO QUALIFY: If position has a positive degree requirement or education forms the basis for qualifications, you MUST submit transcriptswith the application. Official transcripts are not required at the time of application; however, if position has a positive degree requirement, qualifying based on education alone or in combination with experience, transcripts must be verified prior to appointment. An accrediting institution recognized by the U.S. Department of Education must accredit education. Click here to check accreditation.

FOREIGN EDUCATION: Education completed in foreign colleges or universities may be used to meet the requirements. You must show proof the education credentials have been deemed to be at least equivalent to that gained in conventional U.S. education program. It is your responsibility to provide such evidence when applying.

Contacts

• Address Cannon AFB 110 E Alison Avenue Ste 2038 Cannon AFB, NM 88103 US
• Name: Total Force Service Center
• Phone: 1-800-525-0102
• Email: [email protected]