About the Position: Serve as a Civil Engineer in utilizing a professional knowledge of the practices, theories and methodologies of civil engineering and construction management, incumbent directs, assists and advises in the planning, direction, and administration of the complex construction contracts.

Duties

Review existing and projected construction and dredging contracts, plans and specifications from the stand point of anticipating and making recommendations to improve quality and facilitate effective administration. Work with other Corps of Engineers team members, architects, engineers and construction contractors to ensure requisite quality control is maintained, work is performed in accordance with contract provisions. Develop preliminary findings on specifications, estimates, and recommendations for contract change orders and supplemental agreements involving additions and changes in work, designs, methods, materials, equipment, time, and costs. Ensure technical problems during site preparation and construction operations are resolved with minimal impact on project execution. Work with customers/sponsors/outside agencies to promote favorable and effective working relations and ensure adequate construction progress is maintained. Responsible for administration and oversight of construction contracts. Experience in demolition, new construction, rehabilitation of existing structures, shoreline protection, beach renourishment, dredging, and implementation of temporary flood risk reduction features.

Requirements

• Appointment may be subject to a suitability or fitness determination, as determined by a completed background investigation.
• May be selected at any grade level with non-competitive promotion potential to target grade. Non-competitive promotion potential to the target grade based on time-in-grade requirements and demonstrated ability to perform the higher graded duties.
• Temporary Duty (TDY) is 10% of the time.

Qualifications

Who May Apply: Only applicants who meet one of the employment authority categories below are eligible to apply for this job. You will be asked to identify which category or categories you meet, and to provide documents which prove you meet the category or categories you selected. See Proof of Eligibility for an extensive list of document requirements for all employment authorities. Current Department of Army Civilian EmployeesCurrent Department of Defense (DOD) Civilian Employee (non-Army)Domestic Defense Industrial Base/Major Range and Test Facilities Base Civilian Personnel WorkforceInteragency Career Transition Assistance PlanLand Management Workforce Flexibility ActMilitary Spouses, under Executive Order (E.O.) 13473Priority Placement Program, DoD Military Reserve (MR) and National Guard (NG) Technician EligiblePriority Placement Program, DoD Military Spouse Preference (MSP) EligiblePriority Placement Program, DoD MR and NG Preference Eligible Tech Receiving Disability RetirementPriority Placement Program, DoD Retained Grade Preference EligibleReinstatementVeterans Employment Opportunity Act (VEOA) of 1998 In order to qualify, you must meet the education and experience requirements described below. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social). You will receive credit for all qualifying experience, including volunteer experience. Your resume must clearly describe your relevant experience; if qualifying based on education, your transcripts will be required as part of your application. Additional information about transcripts is in this document. In addition to meeting the basic requirement in the education section to qualify for this position you must also meet the qualification requirements listed below: To qualify at the GS-11 grade level, you must have: Specialized Experience: One year of specialized experience which includes assisting in the oversight of construction contracts; performing site evaluations and investigations; and performing quality assurance of assigned projects. This definition of specialized experience is typical of work performed at the second lower grade/level position in the federal service (GS-09) OR Successfully completed a Ph.D. or equivalent doctoral degree or 3 full years of progressively higher-level graduate education leading to such a degree in a field which demonstrates the knowledge, skills, and abilities necessary to perform the work of the position, such as Civil Engineering (Note: You must attach a copy of your transcripts.) To qualify at the GS-12 grade level, you must have: Specialized Experience: One year of specialized experience which includes overseeing construction projects including performing safety and quality control/quality assurance inspections; providing technical oversight and direction; leading a team project on team-based projects devise, customize, operate, oversee, and/or evaluate specialized information technology systems, processes, and applications pertaining to the performed work and the delivery of its design, end products, or services; recommending solutions to modify standard practices, equipment, devices, processes, and techniques and resolve a wide variety of complex problems as it relates to Civil Work construction projects and contracts. This definition of specialized experience is typical of work performed at the second lower grade/level position in the federal service (GS-11). Some federal jobs allow you to substitute your education for the required experience in order to qualify. For this GS-12, you must meet the qualification requirement using experience alone--no substitution of education for experience is permitted. You will be evaluated on the basis of your level of competency in the following areas: Acquisition StrategyProject ManagementStakeholder ManagementTechnical Competence Time in Grade Requirement: For GS-11 - Applicants who have held a General Schedule (GS) position within the last 52 weeks must have 52 weeks of Federal service at the next lower grade or equivalent (GS-09). For GS-12 - Applicants who have held a General Schedule (GS) position within the last 52 weeks must have 52 weeks of Federal service at the next lower grade or equivalent (GS-11). To be referred, applicants must meet applicable time-in-grade and specialized experience requirements within 30 calendar days after the closing date of the announcement.

Education

Basic Requirement for Civil Engineer:
Degree: Bachelor's degree (or higher degree) in engineering. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher degree) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET);OR(2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.
OR
Combination of Education and Experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:
1. Professional registration or licensure - Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.
2. Written Test - Evidence of having successfully passed the Fundamentals of Engineering (FE) examination, or any other written test required for professional registration, by an engineering licensure board in the various States, the District of Columbia, Guam, or Puerto Rico.
3. Specified academic courses - Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in A above. The courses must be fully acceptable toward meeting the requirements of an engineering program.
4. Related curriculum - Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. In addition to meeting the basic requirement above, to qualify for this position you must also meet the qualification requirements listed below: To qualify based on your experience, your resume must describe at least one year of specialized experience.

FOREIGN EDUCATION: If you are using education completed in foreign colleges or universities to meet the qualification requirements, you must show the education credentials have been evaluated by a private organization that specializes in interpretation of foreign education programs and such education has been deemed equivalent to that gained in an accredited U.S. education program; or full credit has been given for the courses at a U.S. accredited college or university. For further information, visit: https://sites.ed.gov/international/recognition-of-foreign-qualifications/.

Contacts

• Address RL-W2SR02 US ARMY ENGINEER DISTRICT-JACKSONVILLE DO NOT MAIL Jacksonville, FL 32202 US
• Name: Army Applicant Help Desk