This is a public notice flyer to notify interested applicants of anticipated vacancies through the STRL Mission Support direct hire authority. Applications will not be accepted through this flyer. Interested applicants must follow the directions in the "How to Apply" section of this flyer to be considered. There may or may not be actual vacancies filled from this flyer. Notice of Result letters will not be sent to applicants who respond to this flyer.

Duties

You will perform all types of general machinist work involving machine tool operation assembly, installation, and bench work required in the fabrication and repair of mechanical parts and assemblies during prototype and engineering development phase. You will program and operate numerical control (NC) and computer-numerical control machine tools (CNC). You will effectively plan the methods and proper sequence of operations to follow in fabricating the required parts. You will commonly work to tolerances of .001 inch and occasionally work to tolerances of .0005 inch. You will use precision measuring instruments such as: micrometers, dial indicators, precision gauge blocks, vernier calipers and height gages, and special tolerance gauges in setting up the checking parts or assemblies being manufactured. Performs general bench work such as: chipping, filing, grinding, tapping, reaming, scraping, lapping, and polishing as required in the fitting and assembling of parts into completed assemblies.

Requirements

• This is a bargaining unit position.
• You will be required to obtain and maintain a current valid United States driver’s license.
• Must be a US Citizen.
• Must be determined suitable for federal employment.
• Must participate in the direct deposit pay program.
• New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov
• Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.
• Males born after 12-31-59 must be registered for Selective Service.
• You will be required to successfully complete a pre-appointment physical examination.
• You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.
• You will be required to wear personal protective equipment such as helmets, gloves, coveralls, glasses, goggles, respirators and safety shoes continuously for the duration of the work shift.
• You must be willing and able to lift and/or carry loads/items up to 40 pounds in weight.
• Work is performed in areas where potentially harmful physical and chemical agents are present (e.g. fumes, dust, heat, ionizing and non-ionizing radiation and chemicals). You will be required to participate in medical surveillance programs.
• This position requires the employee to have the ability to discern colors, contrast, and depth.

Qualifications

Although a specific length of time and experience is not required for most trade and labor occupations, you must show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on quality of experience, not necessarily the length of time. Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the job elements and screen out listed below. This job has a screen-out element which will be used to determine minimum eligibility for this job. Applicants who do not meet the screen-out element will be found ineligible. The Screen-Out Element for this position is: I have the ability to perform common tasks including: Able to run machines/grinds metals including metal alloys and non-metallic parts. Program and load existing numerical control programs into machines and does set-ups including securing work piece in chuck, faceplate, and mill table. Perform the more difficult work under minimal guidance of a senior machinist or supervisor. The individual checks his/her own work using tools common to the machinist trade including micrometers, indicators, and Vernier's. Mastery of established operating procedures, safety regulations, and practices is expected. Applicants must meet the requirements of the Office of Personnel Management (OPM) Job Qualification Handbook for Trades and Labor Occupations. Additional qualification information can be found at: https://www.opm.gov/policy-data-oversight/classification-qualifications/federal-wage-system-qualifications/#url=WG-3400 Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment.

Education

This job does not have an education qualification requirement.

Contacts

• Address NAVAL FACILITIES ENG COMMAND HAWAII 400 Marshall Road Pearl Harbor, HI 96860 US
• Name: Dawt Sung
• Phone: 808-751-5530
• Email: [email protected]