The primary purpose of this position is to troubleshoot, repair, modify, and make final adjustments to one or more types of models of malfunctioning conventional and/or modified aircraft engines in test cells or while on the aircraft.

Duties

Troubleshoots and inspects one or more types or models of malfunctioning conventional and/or modified aircraft engines on the flight line, in test cells, or maintenance shops. Disassembles, repairs, and reassembles aircraft engines, their assemblies, and components. Uses a variety of hand and power tools. Utilizes safety practices and procedures following established safety rules and regulations and maintains a safe and clean work area.

Requirements

• U.S. Citizenship Required
• Males must be registered for Selective Service, see www.sss.gov
• This position is subject to provisions of the DoD Priority Placement Program
• Disclosure of Political Appointments
• May be required to work overtime, rotating shifts, uncommon tours, weekends, etc.
• Subject to work in any shop/section within the Propulsion Flight
• May be required to travel in military and unit assigned aircraft for the purpose of temporary duty assignments
• This position is designated by Air Force as a Testing Designated Position (TDP). The incumbent is required to refrain from using illegal drugs and may be required to submit to urinalysis testing
• The selectee must sign a statement of acknowledging the position occupied is identified as a TDP
• The work may require the employee to drive a motor vehicle. An appropriate, valid driver's license may be required
• Must be able to obtain and maintain a Secret Clearance
• May require operation of forklift up to 15.000 pound capacity to move heavy power support equipment
• May require to operate several motor vehicles and maintain appropriate valid drivers license
• May be required to be "Red X" certified IAW AFI 21-101 and AMCI 21-101, or JBCI 21-101

Qualifications

QUALIFICATIONS: Applicants will be rated in accordance with the OPM Qualification Standard Handbook X-118C for the WG-8600, Engine Overhaul Group. Although a specific length of time and experience is not required for most blue-collar positions, you must meet any screen-out element listed, and show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on the quality of experience, not necessarily the length of time. The screen out element for this position is ability to do the work of a WG-8602 AIRCRAFT ENGINE MECHANIC without more than normal supervision. JOB ELEMENTS: Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the following areas: 1. Knowledge of installation, operation, and repair of a variety of conventional and modified aircraft engines and accessory systems to troubleshoot, maintain, repair and/or test different types of engines; identify and correctly choose between alternative methods and trade techniques; adapt accepted repair procedures to new or unfamiliar engines or accessory systems; anticipate required tools and parts; set up the work area; determine degree of disassembly necessary, and the extent of rework required. 2. Knowledge of safety regulations, practices, and procedures. 3. Skill in the use of diagnostic and on-board electronic equipment and systems, automated test equipment, standard and precision measuring instruments such as vibration analyzers, pyrometers, and test benches, and to use computer terminals or personal computers to obtain reference materials, and to update operational and maintenance records. 4. Ability to read and interpret technical orders, manufacturers' manuals, maintenance bulletins, complex multi-view blueprints, schematic drawings, and other technical information. 5. Ability to troubleshoot engine malfunctions, interpret trouble reports or observed instrument readings, appearances, etc.; make a tentative diagnosis; select needed tools and test equipment; and disassemble the engine or accessory system to locate the defect. 6. Ability to adapt emerging technology and use new tools, test devices, digital diagnostic equipment, and engine analysis software in the repair and rework of engine parts and components and replace accessories such as portions of electrical, pneumatic, and hydraulic systems. Physical Effort: The work requires moderate to strenuous effort. Must stand, stoop, bend, reach, climb, and crawl. Frequently handles items weighing up to 20 pounds, and occasionally lifts and carries items weighing up to 50 pounds. Hoists, hand trucks, lifts, or other employees are available to assist when handling heavy or awkward items. Working Conditions: Work is performed in clean, well lighted, and well-ventilated production areas. May work outside or inside in areas that are drafty and noisy, such as aircraft hangars. Stands on concrete, metal, or hard composition floors for long periods of time. Frequently exposed to grease, oils, fuels, and solvents; to noise from drills and hammers; and to the possibility of cuts, bruises, and injury from falls from scaffolds, ladders, or aircraft surfaces. PART-TIME OR UNPAID EXPERIENCE: Credit will be given for appropriate unpaid and or part-time work. You must clearly identify the duties and responsibilities in each position held and the total number of hours per week. VOLUNTEER WORK EXPERIENCE: Refers to paid and unpaid experience, including volunteer work done through National Service Programs (i.e., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student and social). Volunteer work helps build critical competencies, knowledge and skills that can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience.

Education

This job does not have an education qualification requirement.

Contacts

• Address JB Charleston 101 E Hill Blvd Bldg 503 JB Charleston, SC 29404 US
• Name: Total Force Service Center
• Phone: 1-800-525-0102
• Email: [email protected]