Click on "Learn more about this agency" button below to view Eligibilities being considered and other IMPORTANT information. The primary purpose of this position is to this is a developmental position with known promotion potential to the target position of 9M9W146, Fuel Distribution System Mechanic, WG-4255-10. Incumbent works closely with the supervisor in performing duties identified in the full performance standard core personnel document/core document.

Duties

- Inspects and tests fuel receiving, storage, and distribution facilities and performs preventive maintenance on fuel systems and components. - Performs all phases of liquid fuel system and component maintenance including preventive maintenance, troubleshooting, repair, and modification. - Participates in cleaning the interior surface of bulk storage tanks, above and below ground, by entering tanks. - Utilizes safety practices and procedures following established safety rules and regulations and maintains a safe and clean work environment.

Requirements

• U.S. Citizenship Required
• Males must be registered for Selective Service, see www.sss.gov
• This posn is subject to provisions of the DoD Priority Placement Program
• Disclosure of Political Appointments
• Shift work may be required.
• The employee may be required to work other than normal duty hours, which may include evening, weekends, and/or holidays.
• The work may require that the employee be certified in the use of a respirator.
• The work may require that the employee be certified or able to be certified as qualified for entry into hazardous liquid fuel tanks for inspection, cleaning, and repair.
• The work requires the employee to drive a motor vehicle. An appropriate, valid driver’s license is required for the position.
• The physical requirements of this position as determined by the manager are: Performs work that involves frequent bending, reaching, crouching, kneeling, crawling, stooping, standing,
• arm movement, and climbing. Sometimes must work in awkward, tiring, or uncomfortable positions, or cramped areas. Frequently lifts, carries, and sets up parts and equipment weighing up to 50 pounds and occasionally
• lifts items weighing over 50 pounds using jacks, hoists, or helpers. May be required to make repairs and installations from ladders, scaffolding, and platforms and to enter bulk storage tanks through tank manholes 24 inches in diameter
• This is a Mission Essential (ME) position performing a Mission Critical Function (MCF) which must continue uninterrupted after the occurrence of an Emergency and continued through full resumption of all functions.
• IAW, DoDI 3020-42, Defense Continuity Programs.
• This position has been designated by the Air Force as a Testing Designated Position (TDP) under the Air Force Civilian Drug Demand Reduction Program. Employee must pass initial and periodic short notice drug testing.
• Illegal drug use by employees in sensitive positions presents a clear threat to the mission of the Air Force, national security, and public safety
• This is Developmental position target grade WG-10.

Qualifications

In order to qualify, you must meet the quality level of experience requirements described in the Office of Personnel Management (OPM) Qualification Standards Handbook X-118C. QUALIFICATIONS: Applicants will be rated in accordance with the OPM Qualification Standard Handbook X-118C for the WG-4200 Plumbing and Pipefitting Group. Although a specific length of time and experience is not required for most blue-collar positions, you must meet any screen-out element listed and show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on the quality of experience, not necessarily the length of time. The screen out element for this position is ability to do the work of a FUEL DISTRIBUTION SYSTEM MECHANIC without more than normal supervision. JOB ELEMENTS: Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the following areas: 1. Knowledge of fuel distribution and storage systems; of the physical properties and hazards associated with the handling of various types of petroleum fuels; and of preventive maintenance and inspection techniques as applied to fuel distribution and storage systems. 2. Knowledge of the troubleshooting, maintenance, and repair of electrical components such as electric motors, disconnect switches, starters, contactors, solenoids, and magnetic switches. 3. Knowledge of safety regulations, procedures, and practices. 4. Skill in calibration of fuel dispensing systems and tank and pressure gauges. 5. Skill in techniques used to measure, cut, thread, join, and fit piping and tubing. 6. Ability to analyze deficiencies and diagnose malfunctions of system components such as automatic control valves, pumps, flow meters, etc. Physical Effort: Performs work that involves frequent bending, reaching, crouching, kneeling, crawling, stooping, standing, arm movement, and climbing. Sometimes must work in awkward, tiring, or uncomfortable positions, or cramped areas. Frequently lifts, carries, and sets up parts and equipment weighing up to 50 pounds and occasionally lifts items weighing over 50 pounds using jacks, hoists, or helpers. May be required to make repairs and installations from ladders, scaffolding, and platforms and to enter bulk storage tanks through tank manholes 24 inches in diameter. Working Conditions: Work is performed inside and outside and may be subject to extreme heat and cold and hard, damp floors or surfaces. Work is usually dirty, dusty, and greasy. May be required to make installations and repairs outside during inclement weather. Frequently exposed to the possibility of cuts, scrapes, strains, bruises, burns, infections, and skin abrasions. Subject to skin irritation from fuels and oils; exposure to noxious fumes or toxic vapors; and danger of fire, explosion, electrical shock, and asphyxiation. Occasionally exposed to the possibility of broken bones. May be subject to claustrophobic conditions and the wearing of cumbersome breathing equipment when performing periodic cleaning of the interior of bulk storage tanks. Works around machinery or moving parts. May wear and use uncomfortable protective clothing and safety devices such as protective eyeglasses, ear devices, hard hats, hard-toe shoes, respirators, and gloves for long periods of time. PART-TIME OR UNPAID EXPERIENCE: Credit will be given for appropriate unpaid and or part-time work. You must clearly identify the duties and responsibilities in each position held and the total number of hours per week. VOLUNTEER WORK EXPERIENCE: Refers to paid and unpaid experience, including volunteer work done through National Service Programs (i.e., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student and social). Volunteer work helps build critical competencies, knowledge and skills that can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience.

Education

This job does not have an education qualification requirement.

Contacts

• Address JB Elmendorf-Richardson 8517 20th Street Suite 203 JB Elmendorf-Richardson, AK 99506 US
• Name: Total Force Service Center
• Phone: 1-800-525-0102
• Email: [email protected]