This is a public notice flyer to notify interested applicants of anticipated vacancies. Applications will not be accepted through this flyer. Interested applicants must follow the directions in the "How to Apply" section of this flyer to be considered. There may or may not be actual vacancies filled from this flyer. Notice of Result letters will not be sent to applicants who respond to this flyer.

Duties

You will lead the investigation of fiber optic technology and its implementation into shipboard systems, with an emphasis on fiber optic sensing. You will work closely with the A31 branch members, other NSWCDD departments, and external government and industry organizations. You will perform new and innovative fiber optic component solutions and technologies. You will conduct biometric analysis of state-of-the-art fiber optic technologies. You will conduct test and evaluation for the inclusion of fiber optic components and technologies in shipboard environments. You will perform rapid prototyping fiber based and applied photonic solutions to novel capability gaps. You will lead communication and coordination of various tasks and efforts with the program offices, ship builders, industry Vendors, and other government organizations. You will lead the qualification of novel fiber optic technologies and components, and the development or updating of fiber optic installation and methods. You will provide technical guidance to organizations, for compliance to requirements within Navy Shipboard Fiber Optic government documentation and standards.

Requirements

• Must be a US Citizen.
• Must be determined suitable for federal employment.
• Must participate in the direct deposit pay program.
• New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov
• Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.
• Males born after 12-31-59 must be registered for Selective Service.
• For the 1550: This position is designated as a Cyber IT/Cybersecurity Workforce position. You must obtain and maintain the credentials as described in SECNAV M-5239.2 within 12 months of appointment.
• You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.
• This position is covered under the Defense Acquisition Workforce Improvement Act (DAWIA). Certification in the Acquisition Functional Area and category assigned to the position is required within established category timeframes.
• This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.

Qualifications

For the ND-04: Your resume must also demonstrate at least one year of specialized experience at or equivalent to the ND-3 pay band (GS-9 through GS-11 equivalency) in the Federal service or equivalent experience in the private or public sector. Specialized experience must demonstrate the following: leading the research, development, or testing and evaluation of fiber optic technology and its implementation into shipboard systems. For the ND-03: Your resume must also demonstrate at least one year of specialized experience at or equivalent to the ND-2 pay band (GS-5 through GS-8 equivalency) in the Federal service or equivalent experience in the private or public sector. Specialized experience must demonstrate the following: performing research, development, or testing and evaluation of fiber optic technology and its implementation into shipboard systems. Additional qualification information can be found from the following Office of Personnel Management website: https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/ Individual Occupational Requirements (IOR): All Professional Engineering Positions, 08XX General Physical Science Series, 1301 (opm.gov) Physics Series, 1310 Operations Research Series 1515 (opm.gov) Mathematics Series, 1520 Computer Science Series, 1550 Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment.

Education

Applicants must meet at least one of the following positive education qualifications requirements of the Office of Personnel Management (OPM) Qualifications Standards Manual:

For the 0801 Professional Engineering Series: Degree: Engineering. To be acceptable, the program must: (1) lead to a bachelor's degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.
OR
Combination of education and experience -- college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:
1. Professional registration or licensure -- Current registration as an Engineer Intern (EI), Engineer in Training (EIT)1 , or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.
2. Written Test -- Evidence of having successfully passed the Fundamentals of Engineering (FE)2 examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico.
3. Specified academic courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A.
4. Related curriculum -- Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all inclusive.)

For the 1301 Professional Physical Science Series: Degree: physical science, engineering, or mathematics that included 24 semester hours in physical science and/or related engineering science such as mechanics, dynamics, properties of materials, and electronics.
OR
Combination of education and experience -- education equivalent to one of the majors shown in A above that included at least 24 semester hours in physical science and/or related engineering science, plus appropriate experience or additional education.

For the 1310 Professional Physics Series: A degree in physics; or a related degree that includes at least 24 semester hours in physics; or, a combination of education and experience demonstrated by coursework that is equivalent to a major in physics (at least 24 semester hours), plus appropriate experience or additional education

For the 1515 Professional Operations Research Series: Degree: in operations research; or at least 24 semester hours in a combination of operations research, mathematics, probability, statistics, mathematical logic, science, or subject-matter courses requiring substantial competence in college-level mathematics or statistics. At least 3 of the 24 semester hours must have been in calculus.

For the 1520 Professional Mathematics Series: Degree: mathematics; or the equivalent of a major that included at least 24 semester hours in mathematics.
OR
Combination of education and experience -- courses equivalent to a major in mathematics (including at least 24 semester hours in mathematics), as shown above, plus appropriate experience or additional education.

For the 1550 Professional Computer Science Series: Degree: computer science; or bachelor's degree with 30 semester hours in a combination of mathematics, statistics, and computer science. At least 15 of the 30 semester hours must have included any combination of statistics and mathematics that included differential and integral calculus. All academic degrees and course work must be from accredited or pre-accredited institutions.


TO QUALIFY FOR ND-3: Education may be substituted for specialized experience as follows:

• A master's or equivalent graduate degree; OR
• Two full years of progressively higher level graduate education leading to a master's or equivalent graduate degree; OR
• A combination of experience and graduate education as described above that equates to one year of experience.

Contacts

• Address NAVSURFWARCENDLD 6149 Welsh Road Suite 203 Dahlgren, VA 22448 US
• Name: DLGR_NSWC Job Info
• Phone: (540) 653-8943
• Email: [email protected]