Please limit your resume to 5 pages. If more than 5 pages are submitted, only the first 5 pages will be reviewed to determine your eligibility/qualifications. This is a Direct Hire Authority (DHA) solicitation utilizing the DHA for Domestic Defense Industrial Base (DIB) & Major Range and Test Facilities Base (MRTFB) to recruit and appoint qualified candidates to positions in the competitive service.

Duties

This is a developmental position. If the selection should be at the lower grade level the incumbent will perform duties under closer than normal supervision. Assignments become progressively more difficult until the full performance level is reached. Serve as project/consultant engineer performing and initiating production design/improvement process studies in support of Depot organizations. Plan and coordinate projects concerning the design of equipment and systems based on current and projected workload. Develop and provide usable, reliable overhaul/repair procedures to the production shops from officially approved technical data sources. Provide equipment specification, economic analysis, ordering and contact data, etc., to implement equipment and facilities modification in order to optimize production. Assist Program Management with Manufacturing Readiness Reviews of new workload and technology. Provide guidance and develop and/or review requirements for implementing Enterprise Resource Planning Solutions, Material Requirement Planning, Manufacturing Resources(s) Planning and Manufacturing Execution Systems.

Requirements

• Appointment may be subject to a suitability or fitness determination, as determined by a completed background investigation.
• This position is designated as moderate risk involving Public Trust. Appointment to this position is subject to a background investigation including a credit check to determine suitability for Federal employment and/or the position.
• One-year probationary period may be required.
• Incumbent is required to submit a Confidential Financial Disclosure Report, OGE-450, (5CFR Part 2634, Subpart I Confidential Financial Disclosure Reports) upon entering the position and annually.
• If you misrepresent your experience/education or provide false/fraudulent information in/with your application, it may be grounds for not hiring you or for firing you. Making false/ fraudulent statements also may be punishable by fine/imprisonment.

Qualifications

Who May Apply: US Citizens In order to qualify, you must meet the education and/or experience requirements described below. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social). You will receive credit for all qualifying experience, including volunteer experience. Your resume must clearly describe your relevant experience; if qualifying based on education, your transcripts will be required as part of your application. Additional information about transcripts is in this document. In addition to meeting the basic requirement below, to qualify for this position you must also meet the following qualification requirements: Specialized experience GS-05: Applicants who meet the basic requirements described in the individual occupational requirements are fully qualified for the GS-05 grade level. Specialized Experience GS-07: One year of specialized experience which includes 1) Experience with data validation, analysis, and report writing; 2) Knowledgeable in engineering sciences to include testing a variety of systems and equipment; AND 3) Experience utilizing AutoCAD (Computer Aided Design). This definition of specialized experience is typical of work performed at the second lower grade/level position in the federal service (GS-05). OR Education: One full year of graduate level education in a field which demonstrates the knowledge, skills, and abilities necessary to do the work of the position, such as: [insert applicable field(s) of study]. OR Superior Academic Achievement. In order to be creditable under this provision, Superior Academic Achievement must have been gained in a curriculum that is qualifying for the position to be filled, such as that identified in Education above. Superior Academic Achievement is based on: (1) Class Standing - Applicants must be in the upper third of the graduating class in the college, university, or major subdivision, such as the College of Liberal Arts or the School of Business Administration, based on completed courses; OR (2) Grade-Point Average (G.P.A.) - Applicants must have a grade-point average of either (a) 3.0 or higher out of a possible 4.0 ("B" or better) as recorded on your official transcript, or as computed based on 4 years of education, or as computed based on courses completed during the final 2 years of the curriculum; or (b) 3.5 or higher out of a possible 4.0 ("B+" or better) based on the average of the required courses completed in the major field or the required courses in the major field completed during the final 2 years of the curriculum.; OR (3) Honor Society Membership - Applicants may be considered eligible based on membership in one of the approved national scholastic honor societies listed by the Association of College Honor Societies (https://www.achshonor.org/). OR Combination of Education and Experience: A combination of education and experience may be used to qualify for this position as long as the computed percentage of the requirements is at least 100%. To compute the percentage of the requirements, divide your total months of experience by 12. Then divide the total number of completed graduate semester hours (or equivalent) by 18. Add the two percentages. Specialized Experience GS-09: One year of specialized experience which includes 1) Evaluating engineering plans, designs and specifications; AND 2) Troubleshooting product production problems in operations to reduce/eliminate root causes. This definition of specialized experience is typical of work performed at the second lower grade/level position in the federal service (GS-07). OR Education: Master's or equivalent graduate degree or 2 full years of progressively higher level graduate education leading to such a degree in a field which demonstrates the knowledge, skills, and abilities necessary to do the work of the position, such as: [insert applicable field(s) of study]. OR Combination of Education and Experience: A combination of education and experience may be used to qualify for this position as long as the computed percentage of the requirements is at least 100%. To compute the percentage of the requirements, divide your total months of experience by 12. Then divide the total number of completed graduate semester hours (or equivalent) beyond the first year (total graduate semester hours minus 18) by 18. Add the two percentages. Specialized Experience GS-11: One year of specialized experience which includes 1) Preparing acquisition reports/packages; 2) Initiating production design/improvement process studies and making recommendations to simplify work processes; AND 3) Developing new standard procedures in order to optimize production. This definition of specialized experience is typical of work performed at the second lower grade/level position in the federal service (GS-09). OR Education: Ph.D. or equivalent doctoral degree or 3 full years of progressively higher level graduate education leading to such a degree in a field which demonstrates the knowledge, skills, and abilities necessary to do the work of the position, such as: [insert applicable field(s) of study]. OR Combination of Education and Experience: A combination of education and experience may be used to qualify for this position as long as the computed percentage of the requirements is at least 100%. To compute the percentage of the requirements, divide your total months of experience by 12. Then divide the total number of completed graduate semester hours (or equivalent) beyond the second year (total graduate semester hours minus 36) by 18. Add the two percentages. Specialized Experience GS-12: One year of specialized experience which includes 1) Serving as a project/consultant engineer on matters involving production design/improvement processes; 2) Developing blueprints/layouts utilizing computer aid design software such as AutoCAD; AND 3) Making final recommendations on all of the following production matters: suitability and adequacy of facilities, equipment and layout, processes, performance, and materials. This definition of specialized experience is typical of work performed at the next lower grade/level position in the federal service (GS-11 or above). Some federal jobs allow you to substitute your education for the required experience in order to qualify. For this job, you must meet the qualification requirement using experience alone--no substitution of education for experience is permitted.

Education

<sup>In addition to meeting the basic requirement below, to qualify for this position you must also meet the qualification requirements listed above:

Basic Requirement for General Engineer:

A. Degree: Bachelor's degree (or higher degree) in engineering. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher degree) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); OR (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.

OR

B. Combination of Education and Experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:

1. Professional registration or licensure - Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.

2. Written Test - Evidence of having successfully passed the Fundamentals of Engineering (FE) examination, or any other written test required for professional registration, by an engineering licensure board in the various States, the District of Columbia, Guam, or Puerto Rico.

3. Specified academic courses - Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in A above. The courses must be fully acceptable toward meeting the requirements of an engineering program.

4. Related curriculum - Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions.</sup>

FOREIGN EDUCATION: If you are using education completed in foreign colleges or universities to meet the qualification requirements, you must show the education credentials have been evaluated by a private organization that specializes in interpretation of foreign education programs and such education has been deemed equivalent to that gained in an accredited U.S. education program; or full credit has been given for the courses at a U.S. accredited college or university. For further information, visit: https://sites.ed.gov/international/recognition-of-foreign-qualifications/

Contacts

• Address GP-W0MUAA USA AMCOM CORPUS CHRISTI ARMY DEPOT DO NOT MAIL Corpus Christi, TX 78419 US
• Name: Army Applicant Help Desk