You will serve as a Supervisory Mega-Project Manager for the Planning, Design and Construction Directorate, Project Management Division of NAVFAC NORTHWEST. This interdisciplinary position will be filled a Supervisory General Engineer (0801) or Supervisory Architect (0808).

Duties

You will serve as a project management expert for the planning, design and construction execution of difficult and highly complex or controversial projects with far reaching scope and effect for the Navy, Marine Corps, and other Supported Commands. You will review the work of others for conformance with applicable criteria to ensure safety, quality, cost effectiveness, and that congressional, environmental, and administrative constraints are not exceeded or violated. You will assign work to subordinates based on priorities, considering the complexity and requirements of the assignments, the type of work, existing workload, and the capabilities and capacities of the employees. You will identify training needs of subordinates, initiate on-the-job training, and recommend formal training necessary for professional development. You will be responsible for the MILCON and complex SRM projects supporting the NAVAL BASE KITSAP (BANGOR) waterfront mission and projects related to Sea Based Strategic Deterrance (SBSD). You will provide leadership, supervision, and expert project management of complex shore facilities per DOD/Navy/NAVFAC Project Management principles.

Requirements

• Must be a US Citizen.
• Must be determined suitable for federal employment.
• Must participate in the direct deposit pay program.
• New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov
• Generally, current federal employees applying for GS jobs must serve at least one year at the next lower grade level. This requirement is called time-in-grade. Time-in-grade requirements must be met by the closing date of this announcement.
• Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.
• Males born after 12-31-59 must be registered for Selective Service.
• You must be a Professional Engineer (PE) or Registered Architect (RA) as outlined under the Qualifications section.
• You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.
• You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.
• You will be required to complete training, obtain, and maintain a government credit card for travel and travel-related purchases.
• This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.
• You will be required to complete ethics orientation within three months of appointment and submit a Confidential Financial Disclosure Report, OGE-450, within 30 days of appointment.
• Supervisors in the executive branch have a heightened personal responsibility for advancing government ethics. You will be required to review the 14 General Principles of Ethical Conduct at 5 CFR 2635.101.
• This position is covered under the Defense Acquisition Workforce Improvement Act (DAWIA). Certification in the Acquisition Functional Area and category assigned to the position is required within established category timeframes.

Qualifications

This position has a Selective Placement Factor that will be used to screen out ineligible candidates. The Selective Placement Factor is: You must currently be a licensed Professional Engineer (PE) if applying for the 0801 series. You must be a Registered Architect (RA) if applying for the 0808 series. Your license or registration must be held in a State, the District of Columbia, the Commonwealth of Puerto Rico, or a territory of the United States. NOTE: You must submit a copy of your current license or registration with your application package. In addition to meeting the Selective Placement Factor and Basic Requirement for series in which you are applying for, your resume must demonstrate at least one year of specialized experience at or equivalent to the GS-13 grade level or pay band in the Federal service or equivalent experience in the private or public sector. Specialized experience must demonstrate the following: 1) Exhibiting mastery and expertise in applying advanced concepts, principles, and practices in project management to provide innovative recommendations and identify, coordinate, and integrate various engineering, architecture, and other related disciplines necessary to deliver expert advisory services and to accomplish cost-effective, high-quality design and construction activities; 2) Utilizing a wide range of advanced concepts, principles, and practices of engineering and architecture to resolve highly challenging and complicated issues and problems; 3) Providing consultative services on project management issues and the entire range of architectural and engineering activities for facilities construction; and 4) Leading, supervising, and/or managing others in providing professional facilities engineering or architectural services. NOTE: This experience must be fully supported in your resume. Additional qualification information can be found from the following Office of Personnel Management website: https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/#url=List-by-Occupational-Series AND https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/0800/files/all-professional-engineering-positions-0800.pdf Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment.

Education

For the GS-0801: Applicants must meet the following basic education requirements of the Office of Personnel Management (OPM) Qualifications Standards Manual:

A. Successful completion of a professional engineering degree. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. Such education must demonstrate the knowledge, skills, and abilities necessary to do the work of the position.

OR

B. Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration For more information about EI and EIT registration requirements, please visit the National Society of Professional Engineers website at: http://www.nspe.orgORC. Evidence of having successfully passed the Fundamentals of Engineering (FE) examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico The FE examination is not administered by the U. S. Office of Personnel Management. For more information, please visit: http://www.nspe.org/Licensure/HowtoGetLicensed/index.html.

OR

D. Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and in engineering that included the courses specified in the basic requirements under paragraph A (above). The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A (above)ORE. Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least one year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily, there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions.

For the GS-0808: Applicants must meet the following basic education requirements of the Office of Personnel Management (OPM) Qualifications Standards Manual:

A. You have a bachelor's or higher degree in architecture.

OR

B. You have a bachelor's or higher degree in a field related to architecture that included 60 semester hours of course work in architecture or related disciplines of which at least (1) 30 semester hours were in architectural design, and (2) 6 semester hours were in each of the following: structural technology, properties of materials and methods of construction, and environmental control systems.

OR

C. You have a combination of college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the arts and sciences underlying professional architecture, and (2) a good understanding, both theoretical and practical, of the architectural principles, methods, and techniques and their applications to the design and construction or improvement of buildings. Your curriculum for a degree in either architecture or architectural engineering covers function, esthetics, site, structure, economics, mechanical-electrical, and other engineering problems related to the design and construction of buildings primarily (but not exclusively) intended to house human activities OR you lack a degree in architecture, but you have 1 year of experience in an architect's office or in architectural work for each year short of graduation from a program of study in architecture that demonstrates that you have acquired a thorough knowledge of the fundamental principles and theories of professional architecture. (Note - In the absence of college courses, 5 years of such experience is required).

Contacts

• Address NAVFAC NORTHWEST 1101 Tautog Circle Silverdale, WA 98314 US
• Name: Department of Navy EIC
• Email: [email protected]