The Biomedical Equipment Support Specialist (BESS) located at the Hampton VA Medical Center provides support for all matters of concern relating to the facility wide lifecycle management of medical equipment. Biomedical support requires the application of engineering and mechanical concepts and methodology to provide lifecycle management and technical support of equipment utilized in the practice of medicine, and to improve clinical care provided by clinical staff throughout VA.

Duties

The Duties described here are at the Full Performance Level Only. Please refer to VA HANDBOOK 5005/95 PART II APPENDIX G49 for a description of the qualifications at the lower grades. Lifecycle management of all medical systems such as imaging, life support, dialysis, and monitoring to include physical and network support. Coordinates and works effectively with other facility support departments including but not limited to Facilities Management Service, Office of Information Technology (OIT), Patient Safety, Sterile Processing Service (SPS), Logistics, Contracting, Informatics, and Environmental Management Service. Specific tasks include but are not limited to incoming inspections, regular and unscheduled maintenance, and planning for end of life replacement in conjunction with clinical services. Utilizes common test equipment including, but not limited to patient simulators, pulse generators, network analyzers, test phantoms, electrical safety analyzers, oscilloscopes, and multimeters. Maintains functional knowledge of relevant safety codes and standards of regulatory bodies including, but not limited to, The Joint Commission, National Fire Protection Association, Food and Drug Administration, Nuclear Regulatory Commission, Association for the Advancement of Medical Instrumentation. Documents all work performed in the computerized maintenance management system. This documentation is completed in accordance with regulatory body requirements, the Office of Healthcare Technology Management Documentation of Services policies and guidelines, and other VA requirements. Applies basic networking principles to resolve medical system communication issues including, but not limited to, node to server failures. Adheres to VA Medical Device Cyber Security policies and procedures in pre-procurement, during system implementation, and throughout the life of the system. Loads operating system and clinical application software as needed. Executes VA policy when responding to network incident response (due to infection, loss of services due to policy changes). As assigned, functions as a Contracting Officer Representative and keeps appropriate certification levels. Uses knowledge of government contract procedures and documentation requirements to develop statements of work, sole source justifications, other applicable documentation (VA Form 6550, Independent Government Cost Estimate, etc.) and to oversee vendor work. Collaborates with Logistics and Contracting to procure parts and services; functions as a purchase card holder, as required. Investigates, remediates and documents Repairable Medical Device recalls and safety alerts issued through the VA Alerts and Recall Management System within established timeframes. Participates in local safety improvement processes such as Root Cause Analysis, safety work groups, and Environment of Care Rounds. Identifies hazards during routine job performance and takes action to ensure they are addressed and corrected. Maintains knowledge of the state of the art in medical technology, including scientific advances, network protocols, and vendor changes. Focuses on professional development in all areas of medical technology lifecycle management including technical skills. Knowledge and training is obtained from formal (conference, vendor-provided classes) or informal (magazines, articles, peer training) means. Provides training and education as appropriate to medical technology end users and clinical staff. Provides mentoring and technical training to peers and BESS at developmental levels. May be tasked with leading and managing installation or upgrade projects for medical devices and systems. This includes but is not limited to pre-implementation planning and coordination with end users, vendors, and other onsite support staff (OIT, Informatics, SPS, etc.) Additional duties are performed as assigned by supervisor related to maintenance, remediation, and tracking of medical systems (action items, special projects, etc.) to meet mission critical requirements. May be asked to assist in other administrative duties as well, including participating in hiring panels. Represents Biomedical/Clinical Engineering department on committees and in meetings as delegated by supervisor. Work Schedule: Monday through Friday 7:00 am to 3:30 pm Telework: Not Available Virtual: This is not a virtual position. Functional Statement #: 00000 Relocation/Recruitment Incentives: Not Authorized Permanent Change of Station (PCS): Not Authorized Financial Disclosure Report: Not required

Requirements

Qualifications

Applicants pending the completion of educational or certification/licensure requirements may be referred and tentatively selected but may not be hired until all requirements are met. BASIC REQUIREMENTS Citizenship. Citizen of the United States. After a determination is made that it is not possible to recruit qualified citizens, necessary personnel may be appointed on a temporary basis under authority of 38 U.S.C. 7405 without regard to the citizenship requirements of 38 U.S.C. 7402 or any other law prohibiting the employment of or payment of compensation to a person who is not a citizen of the United States. Candidates must meet all other requirements for the grade and position concerned. Experience and Education. Associates degree in Biomedical Electronics Technology, Biomedical Equipment Technology or Biomedical Engineering Technology or in a related technical field such as Electronic Technology or Information Technology and two years of experience as a Biomedical Equipment Support Specialist, Biomedical Equipment Technician, Field Service Engineer, Medical Equipment Repairer, or Information Technology Specialist. Or, Bachelor's degree in Biomedical Engineering Technology or in a related field such as Electronics Engineering Technology or Information Technology. Or, Completion of a military training program in biomedical equipment and two years of experience as a Biomedical Equipment Support Specialist or Biomedical Equipment Technician, Field Service Engineer, Medical Equipment Repairer or Information Technology Specialist. Licensure/Certification/Registration. None Grandfathering Provision. All persons employed in VHA as a BESS on the effective date of this qualification standard are considered to have met all qualification requirements for the title, series and grade held, including positive education that is part of the basic requirements of the occupation. For employees who do not meet all the basic requirements in this standard, but who met the qualifications applicable to the position at the time they were appointed to it, the following provisions apply: (1) Such employees may be reassigned, promoted up to and including the full performance level (FPL), or changed to lower grade within the occupation, but may not be promoted beyond the FPL or placed in supervisory or managerial positions. (2) BESSs who are appointed on a temporary basis prior to the effective date of the qualification standard may not have their temporary appointment extended or be reappointed, on a temporary or permanent basis, until they fully meet the basic requirements of the standard. (3) BESSs initially grandfathered into this occupation, who subsequently obtain additional education that meet all the basic requirements of this qualification standard must maintain the required credentials as a condition of employment in the occupation. Grade Determinations: Biomedical Equipment Support Specialist, GS-5 Experience or Education. None beyond basic requirements. Biomedical Equipment Support Specialist, GS-7 Experience. At least one year of experience equivalent to the GS-5 grade level. Demonstrated Knowledge, Skills, and Abilities (KSAs). In addition to the experience above, the candidate must demonstrate all of the following KSAs: Ability to read, interpret, and apply a great variety of technical data such as schematic drawings, wiring diagrams, table charts, mathematical expressions and formulas. Ability to learn equipment maintenance, operating procedures, and repair procedures from training materials and courses. Fundamental knowledge of electronics to include analog, digital and microprocessor theory, pneumatics, hydraulics, optics, electro-mechanics, physics, basic networking, and chemistry. Knowledge of the use of standard level test equipment. Knowledge of anatomy, physiology, medical terminology, medical equipment, and technology. Knowledge of basic networking, computer/server hardware/software and information technologies and computer virus protection software, available software patches and upgrades, and information security tools. Biomedical Equipment Support Specialist, GS-9 Experience. At least one year of experience equivalent to the GS-7 grade level. KSAs. In addition to the experience above, the candidate must demonstrate all of the following KSAs: Knowledge of electronics and electricity including analog and intermediate digital electronics to test, calibrate, maintain, and repair biomedical equipment and moderately complex biomedical instrumentation systems. Skill in the setup and use of standard and advanced level test equipment to perform analysis of the operating and design characteristics of equipment and initiate repairs, reconfiguration, or redesign of moderately complex medical systems. Skill in applying theory, concepts, techniques, design characteristics, operation, and functions to assist and support installation, operation, test, maintenance, repair, design, and modification for a range of medical equipment connected to networks or other operating systems. Ability to evaluate practical and technical information from manufacturers, contract specifications, manuals, and historical data in order to perform analysis required to make recommendations concerning operation, maintenance, and repair of medical equipment. Ability to perform testing and troubleshooting of medical devices involving their interfaces and connections to other medical devices, clinical systems, or information systems either directly or through the hospitals hardwired and wireless networks. Ability to use application software and hardware as it relates to the operation and diagnostics of medical equipment. Knowledge of computer equipment with a wide variety of software to input and retrieve data as required, and to prepare a variety of specific working documents and forms. Biomedical Equipment Support Specialist, GS-11 Experience. At least one year of experience equivalent to the GS-9 grade level. Certification as a Certified Biomedical Equipment Technician, Certified Laboratory Equipment Specialist, Net+ and A+ are highly desirable at this level but not required. KSAs. In addition to the experience above, the candidate must demonstrate all of the following KSAs: Knowledge of a wide range of sciences including, but not limited to, electronics (analog and digital), computer science/networking, mechanical engineering design, pneumatics, hydraulics, chemistry, physiology, medical terminology, anatomy, optics, and biology to perform duties of a broad scope and nature on complex and sophisticated patient-related medical systems and sub-systems. Ability to perform advanced testing and troubleshooting of medical devices involving their interfaces and connections to information systems either directly or through the hospitals hardwired and wireless networks. Knowledge of codes and standards relevant to safe operation of medical instrumentation such as National Fire Protection Association, Food and Drug Administration, Nuclear Regulatory Commission, the Joint Commission, and the Association for the Advancement of Medical Instrumentation. Skill in the use of all types of test and calibration equipment such as digital multi-meters, electrical safety analyzers, defibrillator analyzers, patient simulators, digital oscilloscopes, pulse generators, and Local Area Network analyzers in performing troubleshooting/repair and preventive maintenance activities. Ability to configure and maintain medical servers and desktop computers. Knowledge of contracting regulations, requirements, and specific contract specifications including performance-based contracts. References: VA HANDBOOK 5005/95 PART II APPENDIX G49 The full performance level of this vacancy is GS 11. The actual grade at which an applicant may be selected for this vacancy is in the range of GS 5 to GS 11. Physical Requirements: See VA Directive and Handbook 5019.

Education

IMPORTANT: A transcript or military training certificate must be submitted with your application unless, you are already in this occupation within the agency.

Note: Only education or degrees recognized by the U.S. Department of Education from accredited colleges, universities, schools, or institutions may be used to qualify for Federal employment. You can verify your education here: http://ope.ed.gov/accreditation/. If you are using foreign education to meet qualification requirements, you must send a Certificate of Foreign Equivalency with your transcript in order to receive credit for that education. For further information, visit: https://sites.ed.gov/international/recognition-of-foreign-qualifications/.

Contacts

• Address Hampton VA Medical Center 100 Emancipation Drive Hampton, VA 23667 US
• Name: Michael Schultz
• Phone: 804-274-9694
• Email: [email protected]