The primary purpose of this position is to serve as a professional general engineer, performing design, project programming, construction management/monitoring duties and improvement projects of real property facilities and infrastructure, including utility systems in support of a military installation. Click on "Learn more about this agency" button below to view Eligibilities being considered and other IMPORTANT information.

Duties

Performs planning and design work for substantial multi-phase new construction, renovations, and improvement projects for real property facilities, including utility systems, utilizing a professional knowledge of engineering. Manages projects for new construction, renovations, and improvements to real property facilities and maintains surveillance over construction contractors utilizing a professional knowledge of general engineering and knowledge of architecture to ensure overall compliance with contracted specifications, schedules, etc. Plans, programs, budgets, and executes required projects in support of assigned programs. Performs work in facilities operations and maintenance (O&M) functions. Provides consulting services and project coordination. Collects data and evaluates factors which affect the application of concepts, principles, theories, and methods required to observe, examine, measure, analyze, map, and describe physical and technical features and phenomena. Complies with health, safety, and environmental rules and procedures and performs work in a manner that enhances the safety of the work environment.

Requirements

• U.S. Citizenship Required
• Males must be registered for Selective Service, see www.sss.gov
• If authorized, PCS will be paid IAW JTR and AF Regulations. If receiving an authorized PCS, you may be subject to completing/signing a CONUS agreement. More information on PCS requirements, may be found at: https://afciviliancareers.com/regulatory/
• This posn is subject to provisions of the DoD Priority Placement Program
• Disclosure of Political Appointments
• Recruitment Incentive may be authorized for this position
• Relocation Incentive may be authorized for this position
• Work may occasionally require travel away from the normal duty station on military and commercial aircraft.
• The work requires the employee to drive a motor vehicle. An appropriate, valid driver’s license is required for the position.
• May act as project liaison with the Army Corps of Engineers or other design agencies as required.
• May be required to serve on AandE selection boards. Must be able to obtain and maintain a Secret Security Clearance.
• The employee must meet the Defense Acquisition Workforce Improvement Act (DAWIA) requirements applicable to the duties of the position. The selectee will have up to 24 months to meet the applicable (CONTIN.)
• mandatory experience, education, and training requirements.
• This is a drug testing designated position. The incumbent is subject to random testing for drug use. This position has been designated by the Air Force as a Testing Designated Position (TDP) under the Air Force (CONTIN.)
• Civilian Testing Program. Employee must pass initial and periodic short notice drug testing. Illegal drug use by employees in sensitive positions presents a clear threat to the mission of the Air Force, (CONTIN.)
• national security, and public safety. Incumbent of this position is subject to the possibility of a random drug test.
• This is a Term position NTE: 31/Mar/2028; the individual selected for this position may be extended without further competition. Current Federal civilian employees may apply for this position using (CONTIN.)
• “Reinstatement” eligibility and if selected, a break in service of at least 4 calendar days may be required prior to appointment to this position.

Qualifications

In order to qualify, you must meet the specialized experience requirements described in the Office of Personnel Management (OPM) Qualification Standards for General Schedule Positions, Professional and Scientific Positions, General Engineering Series 0801. BASIC REQUIREMENT: Education: Degree in Engineering. To be acceptable, the program must: (1) lead to a bachelor's degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. OR Combination of education and experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering (all-professional-engineering-positions-0800.pdf (opm.gov)). In addition to meeting the basic requirement above, to qualify for this position you must also meet the qualification requirements listed below: SPECIALIZED EXPERIENCE: Applicants must have at least one (1) year of specialized experience at the next lower grade GS-11, or equivalent in other pay systems. Examples of specialized experience includes professional knowledge of civil, mechanical and electrical engineering concepts, principles, and practices applicable to a broad range of engineering, construction management, life cycle management, etc. and related assignments. Knowledge of design and construction practices and techniques in establishing design parameters and preparing project justifications and specifications. Knowledge of drafting techniques and conventions and drafting skills sufficient to convey design concepts and ideas and formulate working drawings. Knowledge of and familiarity with related fields of work such as architectural, civil, electrical, mechanical, structural and environmental engineering sufficient to ensure that areas of overlapping responsibilities receive proper design considerations. FEDERAL TIME-IN-GRADE (TIG) REQUIREMENT FOR GENERAL SCHEDULE (GS) POSITIONS: Merit promotion applicants must meet applicable time-in­-grade requirements to be considered eligible. One year at the GS-11 level is required to meet the time-in-grade requirements for the GS-12 level. TIG applies if you are in a current GS position or held a GS position within the previous 52 weeks. NOTE: Applicants applying as VEOA candidates who are current GS civil service employees or are prior GS civil service employees within the past 52 weeks must also meet time-in-grade requirements. KNOWLEDGE, SKILLS AND ABILITIES (KSAs): Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the following areas: Professional knowledge of civil, mechanical and electrical engineering concepts, principles, and practices and familiarity with architectural and other engineering disciplines. Knowledge of a broad range of engineering and construction standards, methods, practices, and techniques, materials, and equipment to determine compliance with federal, state, and local codes and regulations; of standard contracting regulations, practices, and procedures as it relates to facilities engineering; knowledge of health, safety, and environmental requirements as outlined in applicable standards, regulations, and/or technical orders; of environmental principles, practices, procedures, laws, regulations, and current legislative issues; of work classifications and the regulatory and statutory restrictions on the expenditures of appropriated and non-appropriated funds. Knowledge of automated data processing concepts, systems capabilities, and economic usage to effectively accomplish assigned functions; and knowledge of program planning and budgeting cycles, financial control and budget systems and management. Knowledge of aesthetic and functional design techniques and skill in preparing project documentation, to include preliminary drawings, sketches, and construction drawings; and technique / skill in drafting sufficient to convey design concepts and ideas and formulate working drawings. Ability to plan, conduct and record site/facilities surveys and inspection; to analyze, interpret, and apply results, rules, regulations, and procedures in a variety of situations and recommend timely and economical solutions. Ability to plan and organize work and coordinate with other engineering disciplines and architects; and communicate effectively both orally and in writing and maintain good working relationships. PART-TIME OR UNPAID EXPERIENCE: Credit will be given for appropriate unpaid and or part-time work. You must clearly identify the duties and responsibilities in each position held and the total number of hours per week. VOLUNTEER WORK EXPERIENCE: Refers to paid and unpaid experience, including volunteer work done through National Service Programs (i.e., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student and social). Volunteer work helps build critical competencies, knowledge and skills that can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience.

Education

IF USING EDUCATION TO QUALIFY: If position has a positive degree requirement or education forms the basis for qualifications, you MUST submit transcriptswith the application. Official transcripts are not required at the time of application; however, if position has a positive degree requirement, qualifying based on education alone or in combination with experience; transcripts must be verified prior to appointment. An accrediting institution recognized by the U.S. Department of Education must accredit education. Click here to check accreditation.

FOREIGN EDUCATION: Education completed in foreign colleges or universities may be used to meet the requirements. You must show proof the education credentials have been deemed to be at least equivalent to that gained in conventional U.S. education program. It is your responsibility to provide such evidence when applying.

Contacts

• Address Ellsworth AFB 1000 Ellsworth Street Suite 2300 Ellsworth AFB, SD 57706 US
• Name: Total Force Service Center
• Phone: 1-800-525-0102
• Email: [email protected]