This position is a Maintenance Mechanic, WG- 4749-9 working in Carr, Colorado, for the R6-National Black-Footed Ferret Conservation Ctr. This position is also open to the public under announcement R6-23-12497747-RR-DE. You must apply to each announcement separately if you wish to be considered under both recruitment methods.

Duties

As a Maintenance Mechanic your duties will include, but are not limited to, the following: Completes repairs, troubleshooting, testing that can be accomplished by removing, replacing, tightening, splicing, soldering, and insulating defective wiring, controls, equipment, and fixtures such as broken and bare wiring, burned out switches and relays, loose connections and fittings, damaged light fixtures, and poorly operating thermostats Performs preventive and corrective maintenance on traditional heating, refrigeration and air­ conditioning systems Operates a variety of types of heavy equipment to push, pull, pile, or load materials such as sand, gravel and earth while excavating, backfilling, grading, or leveling earth to specifications on such projects like repairing and breaking new ground for trails, roads, canals, tunnels, or construction sites. requires the operation of skid steer, small tracker, ATV, and mowers. Constructs, installs, repairs, and modifies wood and wood substitute structures and items requiring close tolerance fit and structural soundness. They construct and repair a wide variety of structural items such as building frames, rafters, concrete forms, walls, staircases, door and window frames, interior and exterior trim, and miscellaneous items such as workbenches, counter tops, bookcases, equipment cabinets, computer consoles, and items requiring limited decorative trim and molding. Performs the maintenance, repair or construction of a variety of Service structures and surfaces of brick, block, stone, and other related materials; laying whole brick, block, and stone in straight horizontal rows; removing damaged portions of walls, partitions, or other similar structures in preparation for repair of damage; and tearing out portions of walls for the installation of doors or windows. Physical Effort: Considerable physical effort is required in the operation and maintenance of facilities, equipment, and attachments.? Considerable energy is needed working in small confined spaces or elevated areas, and operating equipment over rough surfaces.? Location of the tools and controls/attachments frequently requires working in awkward or strained positions. Requires occasional lifting or handling of objects or materials up to 50-100 pounds, unassisted, following proper lifting procedures to avoid injury. Frequently required to stand while working, climb ladders or scaffolding, and bend, stoop, climb, and work in awkward positions. This requires standing, bending, stooping, kneeling, climbing and working in tiring and cramped positions. Work Conditions: Work is accomplished both in an office setting (5%) and outdoors (95%). Works outside in all kinds of weather and frequently exposed to running water, fumes, dust, grease, dirt, falling from ladders or scaffolding, electricity, and moving parts of equipment and machinery. Work performed outside is in a variety of settings where steep terrain, extremely uneven, rocky and slippery footing is normal. Temperature extremes are common. Incumbent may also be exposed to energized circuits, electrical shock, burns, electrical rotary devices, cuts and abrasions from the use of tools and equipment and burns from chemicals.

Requirements

• Must be a U.S. Citizen or National.
• Resume (See "Required Documents"). Failure to provide ALL required information on your resume will result in loss of consideration due to an incomplete application package. It is your responsibility to ensure all information is provided on resume.
• Eligibility and Supporting documents - You will ONLY be considered for the eligibilities that you select "yes" to AND submit the required supporting documentation, as listed in the Required Documents section.
• Merit promotion applicants must meet time-in-grade requirement, as defined in 5 CFR 300, Subpart F.
• Suitability for employment, as determined by background investigation.
• Driver’s License: Selectee may be required to possess and maintain a valid State driver's license at all times during their tenure.
• Probationary Period: Selectees may be required to successfully complete a probationary period.
• Individuals assigned male at birth after 12-31-59 must be registered for the Selective Service. To verify registration visit SSS.gov.

Qualifications

By the closing date of this announcement, you must meet the requirements of the Office of Personnel Management (OPM) Handbook X118C, Job Qualification System for Trades and Labor Occupation. http://www.opm.gov/qualifications/x-118c/ Although no specific amount of experience, education or training is required, applicants must meet a minimum level of ability in relation to the position and the Assessment Questionnaire in order to be rated qualified for consideration. To be qualified candidates must meet any screen out element(s) listed at an "acceptable" level, and must achieve an average rating of at least "acceptable" on all of the elements. Only education, training, or experience acquired before the closing date will be considered. SCREEN-OUT ELEMENT: Your qualifications will first be evaluated against the prescribed screen out element, which usually appears as question 1 in the on-line questionnaire. Those applicants who appear to possess at least the minimal acceptable qualification requirement are considered for further rating; those who do not are rated ineligible and are eliminated. The potential eligibles are then rated against the remainder of the Job Elements. The screen out element for this position is having the ability to perform the following tasks under normal supervision: perform preventive maintenance on traditional heating, refrigeration, and air conditioning; operate skid steer, small tractor, all-terrain vehicles, and mowersJob Elements evaluated are: Knowledge of Equipment Assembly, Installation, Repair, etc. Technical Practices (theoretical, precise, artistic) Ability To Use and Maintain Tools and Equipment Operation of Motor Vehicles Ability To Interpret Instructions, Specification, etc. (includes blueprinting reading) Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience.

Education

There is no substitution of education for experience for Wage Grade (WG) positions.

Contacts

• Address
• Name: Human Resources Staffing Division
• Email: [email protected]