Job opening: Supervisory Interdisciplinary
Salary: $110 137 - 143 181 per year
Relocation: YES
Published at: Jul 26 2024
Employment Type: Full-time
About the Position: Incumbent serves as the Engineering Materials Testing Laboratory Manager for the Herbert Hoover Dike Resident Office. Serves as the technical expert in engineering geology, applying specialized knowledge and experience in developing approaches and solutions to complex problems. As Lab Manager, ensures that the Herbert Hoover Dike Materials Testing Laboratory is staffed, validated, and functioning to provide critical support to construction projects.
Duties
Serves as a technical lead and expert on construction projects.
Serves as the Manager for the Herbert Hoover Dike Engineering Materials Testing Laboratory.
Stays abreast of latest developments in geology, dam safety, and civil engineering with emphasis on geotechnical engineering geology problems and geophysical investigative methods.
Responsible for supervising, coaching, and mentoring.
Ensures Civil Engineering/geological design data included in contract plans, and specifications are sufficient, correct, practical, and reflect sound construction practices and that they fully meet the design intent of the project.
Leads quality assurance staff and technicians in completing their duties.
Requirements
- Appointment may be subject to a suitability or fitness determination, as determined by a completed background investigation.
- Travel is required approximately 10% of the time.
- This position is supervisory as defined by the Office of Personnel Management's (OPM) General Schedule Supervisory Guide (GSSG). A one year probation to assess your ability to perform supervisory duties is required unless previously completed.
- Incidental motor vehicle operator; operates auto or light truck to reach work sites. Incumbent must hold or obtain a valid state driver's license.
Qualifications
Who May Apply: Only applicants who meet one of the employment authority categories below are eligible to apply for this job. You will be asked to identify which category or categories you meet, and to provide documents which prove you meet the category or categories you selected. See Proof of Eligibility for an extensive list of document requirements for all employment authorities.
Current Department of Army Civilian EmployeesCurrent Department of Defense (DOD) Civilian Employee (non-Army)Domestic Defense Industrial Base/Major Range and Test Facilities Base Civilian Personnel WorkforceInteragency Career Transition Assistance PlanLand Management Workforce Flexibility ActMilitary Spouses, under Executive Order (E.O.) 13473Non-Department of Defense (DoD) TransferPriority Placement Program, DoD Military Reserve (MR) and National Guard (NG) Technician EligiblePriority Placement Program, DoD Military Spouse Preference (MSP) EligiblePriority Placement Program, DoD MR and NG Preference Eligible Tech Receiving Disability RetirementPriority Placement Program, DoD Retained Grade Preference EligibleReinstatementVeterans Employment Opportunity Act (VEOA) of 1998
In order to qualify, you must meet the education and/or experience requirements described below. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social). You will receive credit for all qualifying experience, including volunteer experience. Your resume must clearly describe your relevant experience; if qualifying based on education, your transcripts will be required as part of your application. Additional information about transcripts is in this document.
Basic Requirement for Supervisory Civil Engineer:
A. Degree: Bachelor's degree (or higher degree) in engineering. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher degree) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); OR (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.
OR
B. Combination of Education and Experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering.
Basic Requirement for Supervisory Geologist:
A. Degree: Bachelor's degree (or higher degree) in geology, plus 20 additional semester hours in any combination of mathematics, physics, chemistry, biological science, structural, chemical, civil, mining or petroleum engineering, computer science, planetary geology, comparative planetology, geophysics, meteorology, hydrology, oceanography, physical geography, marine geology, and cartography.
OR
B. Combination of Education and Experience: Course work as shown in A above, plus appropriate experience or additional education.(Note:Acceptable experience may have been gained through geological field or laboratory work that provided a means of obtaining professional knowledge of the theory and application of the principles of geology and closely related sciences, e.g., geophysics, geochemistry, or hydrology. Such work generally must have involved making close observations, taking samples, handling various types of instruments and equipment, assembling geologic data from source materials, and analyzing and reporting findings orally and in writing. In some situations, professional scientific experience in other fields may be accepted in part as professional geological experience. Such experience must have been preceded by appropriate education in geology or by professional geological experience, and must have contributed directly and significantly to the applicant's professional geological competence. To receive credit for geological experience obtained in positions that are not full-time professional geological positions, the applicant is responsible for indicating clearly the actual time or percentage of time devoted to geologic duties within such positions, and for giving adequate descriptions of the geologic functions.)
In addition to meeting the basic requirement above, to qualify for this position you must also meet the qualification requirements listed below:
one year of specialized experience equivalent to the GS-12 grade level in the Federal service which includes: 1) providing independent technical review for the Herbert Hoover Dike construction including periodic inspections, Dam Safety inspections, remedial designs, and large instrumentation programs. 2) responding to requests for technical guidance, advice, and assistance from the Resident Office and other components of the Jacksonville District.
The duties of this position require the incumbent to have a current State Registration as Professional Geologist or Professional Engineer. You must possess a current/valid Professional Engineering (PE) or Professional Geologist License in good standing issued by any one of the 50 states, or its territories.
You will be evaluated on the basis of your level of competency in the following areas:
Building and ConstructionGeotechnical EngineeringLeadershipTechnical Competence
Time in Grade Requirement: Applicants who have held a General Schedule (GS) position within the last 52 weeks must have 52 weeks of Federal service at the next lower grade or equivalent (GS-12).
Education
FOREIGN EDUCATION: If you are using education completed in foreign colleges or universities to meet the qualification requirements, you must show the education credentials have been evaluated by a private organization that specializes in interpretation of foreign education programs and such education has been deemed equivalent to that gained in an accredited U.S. education program; or full credit has been given for the courses at a U.S. accredited college or university. For further information, visit:
https://sites.ed.gov/international/recognition-of-foreign-qualifications/.
Contacts
- Address RL-W2SR02 US ARMY ENGINEER DISTRICT-JACKSONVILLE
DO NOT MAIL
Jacksonville, FL 32202
US
- Name: Army Applicant Help Desk
Map